|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
E92 Logic 7 Coding
|
|
11-10-2014, 07:35 AM | #1 |
Second Lieutenant
21
Rep 201
Posts |
E92 Logic 7 Coding
Hi All,
I had a 2008 E92 CIC (Europe) which I've recently retrofitted with the Logic 7 amp and speakers etc. the final piece is to recode the CIC head unit to talk to the amp. I have ncs expert installed. I've done some reading on the basics of coding. Has anyone coded Logic 7 onto a CIC system before who might be able to offer some step by step instructions? I have read up on coding as above but this is my first attempt and I would just like to code Logic 7 and avoid changing anything else. For that matter any instructions would best be geared up for a coding newbie approach. All help very much appreciated |
11-10-2014, 05:09 PM | #2 |
Enlisted Member
5
Rep 41
Posts |
I have retrovited Logic 7 too with cic.
Are you already familiar with coding modules a little bit or only theoretically? Following steps are needed. 1. Change your VO. So if you had $676 (HiFi System) in your VO remove it and add $677. Check this tutorial for it http://nutsofamily.com/wp-content/up...-CHANGE-VO.pdf 2. Then you have to code cic. Change the parameter AUDIO_SYSTEM_CIC value to top_hifi. Use NCS Dummy (http://revtor.be/ncsdummy/ncsdummy.pdf) and NCS Expert for it. 3. That's all with coding. you can use INPA to test the Amp. You can play a test file on all or on each LS and verify everything is working. View post on imgur.com When you choose Logic 7 Amplifier as marked, then you can runt tests. It is called Enable or similar. I can not enter the menu, because I am not connected with the vehicle. May be your amp is quit new, then it would work out of the box with cic. Just try it. I can also do remote coding with your, if you have internet at the vehicel. But note. My CIC had the newest firmware with coding index 1A and the Logic 7 Amp was from 2005. So I had no sound from CIC. I had to flash Amp with WinKFP with the latest firmware. It took 10 minutes and then it had worked. If you have to update your Amp's firmware, it is also not a problem and I will give you steps how to do it. Firmware upgrade is not needed for testing the amp with INPA. So Code the VO and CIC then if you have sound great and enjoy it. If not, test it with inpa. If it works, then we have to flash Amp. If you can not verify working Amp with INPA, search the wiring problem. With regards Lado Last edited by herrlado; 11-10-2014 at 05:19 PM.. |
Appreciate
1
allex2913.00 |
09-18-2017, 09:39 PM | #5 |
Major
167
Rep 1,416
Posts |
|
Appreciate
0
|
09-14-2018, 05:45 AM | #8 | |
Terorist!
29
Rep 315
Posts |
Quote:
I have the same problem. The L7 was installed on the car, amplifier also installed, but when I start the car I have "no acoustic tones" message. Also, the donor car have infiltrated water on the amplifier compartiment and I don't know exactly if is damaged or not. How to update the formware on the amplifier? I have the car from 2010 and L7 system is from 2006. Thank you
__________________
E90/320d/163cp/2007/black/retofit LCI front/rear/Mtech/style 162/M3 mirrors/auto dimming mirrors int-ext/EIBACH PRO KIT/M3spoiler/Performance Kidney Grills/MT/shadow line/M shift knop/M3 steering wheel cover/M footrest/M door sills/M handbrake/Performance aluminium pedal pads/sunroof
___________(Oo) (|||) o (|||) (oO)____________ |
|
Appreciate
0
|
05-08-2020, 08:53 PM | #9 | |
Private
32
Rep 79
Posts
Drives: BMW 325i
Join Date: Sep 2019
Location: Melbourne
|
Quote:
|
|
Appreciate
0
|
07-10-2021, 11:40 AM | #10 |
New Member
29
Rep 23
Posts |
Hi guys here’s my two cents for flashing (programming to be precise) the Logic 7 amplifier with WinKFP (2008 E90 with CCC);
1. Proper wiring of the Logic 7 system (electrically and on MOST loop) 2. Code VO $677 to CAS and FRM. 3. Default code the headunit CAPPL, CAUDI, CTUNE, CHOST and CGATE. You should be able to see the AMP module in the user identification field in INPA. Note the 7-digit ZB number AMP. Before flashing please do prepare your WinKFP with proper Daten files. 4. Enter you VIN in WinKFP. Enter ZB number to find the corresponding AMP module. Select the default configuration. Then click done then click program to flash. It takes about 10 min with K/D-CAN cable. Then you should see in INPA/UIF, the AMP module with your VIN number and the programmed date.
__________________
A DIY lover who has done to his 2008 E90 M3:
-Heated steering wheel retrofit -Top HiFi to Individual Audio retrofit -HiFi to Logic 7 (Top HiFi) retrofit -OEM backup camera retrofit -E9x M3 M-Drive retrofit |
Appreciate
1
allex2913.00 |
07-20-2021, 08:37 PM | #11 | |
Private
32
Rep 79
Posts
Drives: BMW 325i
Join Date: Sep 2019
Location: Melbourne
|
Quote:
Thanks Lado! That information is all that i needed, and seemed cant find anywhere else. Done coding and retrofitted L7, works like a charm! |
|
Appreciate
0
|
09-29-2021, 09:58 AM | #12 |
Registered
0
Rep 1
Posts |
Hello My Logic 7 amp died on me. I have a replacement but need it coded. I have absolutely no experience coding what so ever. What is needed for remote coding? I have the K/D-CAN cable and internet connection.
|
Appreciate
0
|
09-30-2021, 08:30 AM | #13 |
Private First Class
31
Rep 124
Posts |
|
Appreciate
0
|
10-01-2021, 01:47 PM | #14 |
Lieutenant Colonel
729
Rep 1,815
Posts |
Did you pull the original hifi harness out of the car or leave it in place?
__________________
2009 118i Monaco Blue "Maximillion"
2009 335i Saphire Black M Sport "Leopold" Cobb stage 2 aggressive tune, Mishimoto FMIC, Cobb charge pipe, Cobb catted down pipes, Forge diverter valves, BMS inlets and DCI, Cyba scoops and M Individual Audio retrofit and M3 gauge cluster retrofit. 2011 328i Titan Silver M Sport "Franzel" <--Wife's car |
Appreciate
0
|
10-04-2021, 07:43 PM | #15 |
Private
32
Rep 79
Posts
Drives: BMW 325i
Join Date: Sep 2019
Location: Melbourne
|
|
Appreciate
0
|
10-04-2021, 08:14 PM | #16 |
Brigadier General
596
Rep 3,386
Posts |
Dumb question but if I have the base radio can I code Logic 7 EQ? Would love to be able to adjust the equalizer like I used to be able to on my old e92 with Logic 7. Now I'm just stuck with bass and treble only.
__________________
|
Appreciate
0
|
10-07-2021, 01:47 AM | #17 |
Private
32
Rep 79
Posts
Drives: BMW 325i
Join Date: Sep 2019
Location: Melbourne
|
No its not possible. When you enable L7 in CIC, it will disable analog output from the headunit. In short, your speakers will not receive signal from the existing base setup
|
Appreciate
0
|
10-07-2021, 10:19 AM | #18 | |
Brigadier General
596
Rep 3,386
Posts |
Quote:
__________________
|
|
Appreciate
0
|
10-07-2021, 02:21 PM | #19 | |
Lieutenant Colonel
729
Rep 1,815
Posts |
Quote:
You had hifi in your car then installed Logic 7. Did you remove the hifi harness from your car when you installed the logic 7? Or did you not have hifi and just installed the logic 7 harness?
__________________
2009 118i Monaco Blue "Maximillion"
2009 335i Saphire Black M Sport "Leopold" Cobb stage 2 aggressive tune, Mishimoto FMIC, Cobb charge pipe, Cobb catted down pipes, Forge diverter valves, BMS inlets and DCI, Cyba scoops and M Individual Audio retrofit and M3 gauge cluster retrofit. 2011 328i Titan Silver M Sport "Franzel" <--Wife's car |
|
Appreciate
0
|
10-07-2021, 04:41 PM | #20 | |
Private
32
Rep 79
Posts
Drives: BMW 325i
Join Date: Sep 2019
Location: Melbourne
|
Quote:
I made a guide here https://www.e90post.com/forums/showthread.php?t=1847099 |
|
Appreciate
0
|
10-08-2021, 01:28 PM | #21 | |
Lieutenant Colonel
729
Rep 1,815
Posts |
Quote:
__________________
2009 118i Monaco Blue "Maximillion"
2009 335i Saphire Black M Sport "Leopold" Cobb stage 2 aggressive tune, Mishimoto FMIC, Cobb charge pipe, Cobb catted down pipes, Forge diverter valves, BMS inlets and DCI, Cyba scoops and M Individual Audio retrofit and M3 gauge cluster retrofit. 2011 328i Titan Silver M Sport "Franzel" <--Wife's car |
|
Appreciate
0
|
10-08-2021, 05:00 PM | #22 |
Private
32
Rep 79
Posts
Drives: BMW 325i
Join Date: Sep 2019
Location: Melbourne
|
You dont need to, and if you cant find a full L7 harness, you can splice/cut all of your current harness (speaker outputs) and wire it to the 20pin L7 amp socket. The new wires needed are for the center channel and rear door speakers.
|
Appreciate
0
|
Bookmarks |
|
|