[pak1s0ul]

hello i was wondering if its possible to code NFRM i have 2011 M3 LIC thanks

[dsjr2006]

Originally Posted by pak1s0ul

hello i was wondering if its possible to code NFRM i have 2011 M3 LIC thanks

Yea. Try using the "search this thread" link.

[tony13849]

Does the High Positioned Rear Brake Lights flash with this code?

[sono0312]

Originally Posted by tony13849

Does the High Positioned Rear Brake Lights flash with this code?

it is possible to enable third light (top) to brink when BFD for FRM1. that was what i confirmed by coding my colleague's car which had FRM1. my car has been changed to FRM2. then i am not able to make this happen as it has different behaver.

[tony13849]

Originally Posted by sono0312

it is possible to enable third light (top) to brink when BFD for FRM1. that was what i confirmed by coding my colleague's car which had FRM1. my car has been changed to FRM2. then i am not able to make this happen as it has different behaver.

All right, do you still keep the code for FRM1?~~ I want to enable the break and third light blink as Break Force Display~~ Thanks~~

[Frigenchigen]

Wondering if I could get all three brake lights to flash or anything for that matter. Here is a copy of my MAN file from NFRM module (FRM3 LED XE). Furthermore, would it be necessary to add a line to my VO (vehicle order)? Here are the immediate lines in question. As you can see BFD_1_algorithmus is activated however BFD2_Aktiv is not activated.
/BFD_1:

BFD_1_ALGORITHMUS
aktiv
BFD_1_BLINK_FREQ_AUS
wert_01
BFD_1_BLINK_FREQ_EIN
wert_01
BFD_1_ENTPRELL_ABS
wert_01
BFD_1_ENTPRELL_AX
wert_01
BFD_1_MIN_GESCHW
wert_01
BFD_1_STUFE_DELAY
wert_01
BFD_1_THERM_TIMEOUT
wert_02
BFD_1_WEGFALL
nicht_aktiv
BFD_1_WERT_AX_EIN
wert_02
BFD_1_WERT_AX_RUCK
wert_01

/BFD2:

BFD2_A_LOE
wert_02
BFD2_A_MIN
wert_01
BFD2_AKTIV
nicht_aktiv
BFD2_BFD
nicht_aktiv
BFD2_BL
nicht_aktiv
BFD2_BL_M
blinkend
BFD2_BLINKEN
3_hz
BFD2_ESS_ANZEIGE
nicht_aktiv
BFD2_ESS_ENABLE
nicht_aktiv
BFD2_NSL
nicht_aktiv
BFD2_T_ABS
wert_01
BFD2_V_MIN
wert_01

[edgaryo]

Originally Posted by DESI4life10

I was able to get this to work on FRM 1 modules (coded it on mines and a few others).

However, for FRM2 and FRM 3 modules, I am trying to figure it out. I upgraded my FRM 1 with the NFRM (FRM2) module. Fore those with frm 1 here are the values.

BFD_1_RL_BL_ERSCH_BILD = brake light
wert_03 = flashing
BFD_1_BL_M_ERSCH_BILD = 3rd Brake light
wert_03 = flashing
BFD_1_RL_BL_1_ERSCH_BILD = brake light 1
wert_03 = flashing
BFD_1_RL_BL_2_ERSCH_BILD = brake light 2
wert_03 = flashing
BFD_1_NSL_ERSCH_BILD = rear fog lamp
wert_03 = flashing

I just did the flashing on my rear fog lamps as I don't like the look of all the rear lights flashing (too slow with halogen bulbs).

Hey , i want to code my car , i want to BLINK only the 3RD brake light , not all ,like your post . I wonder what parameter i need to change to get that . I think only :

"BFD_1_BL_M_ERSCH_BILD = 3rd Brake light
wert_03 = flashing"


or i need :

"BFD_1_RL_BL_ERSCH_BILD = brake light
wert_03 = flashing
BFD_1_BL_M_ERSCH_BILD = 3rd Brake light
wert_03 = flashing"


Thank you !!!

[edgaryo]

Hey.. Nobody know? Please.. I have a E90 318i from 2005, so frm1...

[evominati]

edgaryo if you can post your FSW_PSW file I can edit it for you
Regards

[Mr-Green]

Originally Posted by sono0312

i just made a comparison table as attached using trc file between one from cuco and the another from myself (sono). i do not know if those are the ones i need to change. but anyway i will try according to this.

these are not all delta but i picked up ones that should be something related to bfd...
would you please give me a feedback if there is something missing?

[updated]
i added some missing values that could be needed to the attached table.

Hi. Have you tested this? & see if it works? Also will this work on a E90 318i 2008