[Bmwuk]

Hi All

Anyone on here able to virginise a m3 cluster and code it so it plug n play? Or do i need to do some coding still when installed? Going into a 330d.

Dont mind sending in post but if someone in midlands can do then that my preference.

Cheers

[Sensible_]

Originally Posted by Bmwuk

Hi All

Anyone on here able to virginise a m3 cluster and code it so it plug n play? Or do i need to do some coding still when installed? Going into a 330d.

Dont mind sending in post but if someone in midlands can do then that my preference.

Cheers

I can virginize it for you. But it has to be coded to your cars VO. Otherwise it won't function correctly.

I can do this remotely via teamviewer if you get yourself a cable.

I can also code the dynamic redline for the 330d see my thread: http://www.e90post.com/forums/showthread.php?t=1335532

[AndyS]

Originally Posted by Sensible_

I can virginize it for you. But it has to be coded to your cars VO. Otherwise it won't function correctly.

I can do this remotely via teamviewer if you get yourself a cable.

I can also code the dynamic redline for the 330d see my thread: http://www.e90post.com/forums/showthread.php?t=1335532

I can vouch for sensibles work. He did an amazing job with my m3 cluster not only virginising it but also spent an inordinate amount of time coding it to my car and adjusting the dynamic redline to only go up as far as 7k to suit my 335i. Absolutely top bloke. Thanks once again mate!

[Bmwuk]

Sounds good, will drop you a PM...

[Bmwuk]

Sensible_ posted cluster today. Can u delete some PMs as your box is full. Thanks

[Sensible_]

Originally Posted by Bmwuk

Sensible_ posted cluster today. Can u delete some PMs as your box is full. Thanks

No worries. Will do buddy.

[Bmwuk]

Fitted and coded today by sensible.... top bloke for sorting...

[Andy198712]

can you get a picture up? sounds great! does the rev gauge match a 330D in terms of range then?

[Bmwuk]

Cluster image as requested...

[Andy198712]

I see the mpg is still on m3 levels

[Bmwuk]

Lol... Must be that heavy right foot of mine...

[Sensible_]

Originally Posted by Bmwuk

Cluster image as requested...

Looking good mate

Out of interest, have you taken the car for a drive to see if the temp gauge reacts?

[Bmwuk]

Going for a blast today so will let you know....

[sirleeofroy]

Originally Posted by Bmwuk

Going for a blast today so will let you know....

Hi, did the oil temp gauge work?

The M3 cluster swap is definitely on my list of things to do, once the remap is done next week, new clutch soon after and brakes..

I will also be fitting into my 330D M-Sport LCI....

[Sensible_]

Originally Posted by sirleeofroy

Hi, did the oil temp gauge work?

The M3 cluster swap is definitely on my list of things to do, once the remap is done next week, new clutch soon after and brakes..

I will also be fitting into my 330D M-Sport LCI....

The oil gauge temp works on M57 engines generally pre-LCI 325d and 330d.

If you have the N57 engine you are or of luck.

However. You can set the temp gauge to KVA (instant MPG) instead if you so wish.

[sirleeofroy]

Originally Posted by Sensible_

The oil gauge temp works on M57 engines generally pre-LCI 325d and 330d.

If you have the N57 engine you are or of luck.

However. You can set the temp gauge to KVA (instant MPG) instead if you so wish.

So there's no way to have it working on the N57?

Hmmm, well that's a dealbreaker for me. The cluster looks nice and all but if the one thing I wanted doesn't work then I don't think there's much point, I may just have my current cluster modded instead.

Thanks

[xxslikmurdererxx]

Originally Posted by Sensible_

I can virginize it for you. But it has to be coded to your cars VO. Otherwise it won't function correctly.

I can do this remotely via teamviewer if you get yourself a cable.

I can also code the dynamic redline for the 330d see my thread: http://www.e90post.com/forums/showthread.php?t=1335532

PM sent

[Rk3series]

Originally Posted by Sensible_

I can virginize it for you. But it has to be coded to your cars VO. Otherwise it won't function correctly.

I can do this remotely via teamviewer if you get yourself a cable.

I can also code the dynamic redline for the 330d see my thread: http://www.e90post.com/forums/showthread.php?t=1335532

I recently installed a used retrofit M3 cluster(not virginized) into my 2007 335i and the everything in the cluster works as in the correct mileage(plus tamper dot), dynamic redline on cold start along with the correct 7k redline except the RPM gauge doesn't work. I'm curious to figure out if the RPM isn't working due to the lack of coding. Is this a coding issue or a mechanical issue? Please let me know and if it's fixable, how much do you charge for this kind of service?

[scuddy100]

Originally Posted by Sensible_

I can virginize it for you. But it has to be coded to your cars VO. Otherwise it won't function correctly.

I can do this remotely via teamviewer if you get yourself a cable.

I can also code the dynamic redline for the 330d see my thread: http://www.e90post.com/forums/showthread.php?t=1335532

Hi I have a BMW E90 320 diesel I have obtained a replacement cluster off of eBay with matching part numbers is is there any way you could virginize this for me and much to my vehicle many thanks Lee

[Sensible_]

Originally Posted by scuddy100

Hi I have a BMW E90 320 diesel I have obtained a replacement cluster off of eBay with matching part numbers is is there any way you could virginize this for me and much to my vehicle many thanks Lee

Sure. No problem. Send me a PM

[Middi25]

Hi ! can anyone code my M3 cluster to work with my bmw e92 320D ? just got it today but not work on my car because it need coding

[Sensible_]

Originally Posted by Middi25

Hi ! can anyone code my M3 cluster to work with my bmw e92 320D ? just got it today but not work on my car because it need coding

As above, if you send me a PM I'll sort it for you.