[marv85]

Originally Posted by cstmx_ryder

Marv,

You had your car dyno'd at COBB as well? LOL....So did I. I was suppose to switch to COBB and try it out, but then I ran into some suspension problems that set me back 1.5 month, ya, that's right, 1.5 months.....LOL.

As for the Cars & Coffee, I don't really care for it, not because I don't like exotics, but I feel like on the technical/tuning side of things, there's not much in common between our cars and the exotics.......I'm more about learning more about our platform and meeting enthusiasts. Possibly even set up some DYI meets as well........

But......I've been wanting to ride in a COBB stg.2+ car, since I've never been, and see how that compares to my Procede........hint, hint, LOL.

I agree and that's exactly what I'm looking for as well. As for this saturday, I'm interested in the 1M. Plus the COBB guys are cool

I dynoed just after I got my DPs and stage 1 installed. Got 355 whp and 367 wtq...

Anyways I'm running stage 2 sport now. I ordered the ETS 5" FMIC. Once that's in, I'm good for stage2+.
Yeah would be cool to compare our setups, so we'll do definitely go for a drive. Plus I've never been in a Procede tuned 335i either

[cstmx_ryder]

Originally Posted by marv85

I agree and that's exactly what I'm looking for as well. As for this saturday, I'm interested in the 1M. Plus the COBB guys are cool

I dynoed just after I got my DPs and stage 1 installed. Got 355 whp and 367 wtq...

Anyways I'm running stage 2 sport now. I ordered the ETS 5" FMIC. Once that's in, I'm good for stage2+.
Yeah would be cool to compare our setups, so we'll do definitely go for a drive. Plus I've never been in a Procede tuned 335i either

355/367? That's pretty good considering it's a mustang dyno.....I think I did 367/393 FBO with Procede Rev.2

I guess that's on par, considering the difference being 12 hp, which is what a CL exhaust gives you.......

So how different is the Stg2 sport vs Stg1?

[marv85]

Originally Posted by cstmx_ryder

355/367? That's pretty good considering it's a mustang dyno.....I think I did 367/393 FBO with Procede Rev.2

I guess that's on par, considering the difference being 12 hp, which is what a CL exhaust gives you.......

So how different is the Stg2 sport vs Stg1?

With all the maps that got released, I'm honestly confused right now. I mean the stage 1 I dynoed with at the time used to hit 14-15PSI. while my stage 2 Sport doesn't hit more than 13-14 PSI. I tried stage 2 aggressive, and that goes above 15 PSI and definitely feels much faster then the old stage 1. Whether they are playing with more parameters and making more power with slightly less boost is beyond my comprehension. We should have a talk with Tim

so Stage 2 Sport > Stage 1 Sport, but I'm not sure how much it differs from the old stage 1.

I'm planning on hitting the dyno once I get stage 2+. I'll let you know when I do, in case you'd like to join.

and if I get the free Dyno this Saturday , i'll try stage 1 vs stage2 aggressive

[Baileyatcobb]

I'll be at the cars and coffee meet by 9:00 AM this saturday.... i'll head over to the shop about 10 AM. There appear to be a couple of tunes scheduled at the shop for Saturday. We'll run the baseline runs between tunes. If that doesnt fit with our schedules we can reschedule for a different day.

How would you guys feel about a BMW only dyno day at the COBB SurgeLine shop? Free dyno pulls for BMW folks would be a great way to draw some attention to the fact that COBB Tuning runs a facility right here in Portland. Custom dyno tunes are already a reality for us using AccessTUNER pro for BMW. If the off the shelf maps don't work you or you want MORE we can do it. Need a map for 100 octane... I can do that. :-)

Dyno day TBD.

Regards
Tim Bailey

[cwarren]

marv and tim ............ if i show up there at say 8:30-9:00 sat you guys have to come over and introduce yourselves . really intrested in your shop hate to say it but didnt know you where local . + if im going to show up at the next meet in a few weeks it would be nice to know someone lol

oh and pick me! love to have my car dynoed

thanks guys,
carl

[Baileyatcobb]

Originally Posted by cwarren

marv and tim ............ if i show up there at say 8:30-9:00 sat you guys have to come over and introduce yourselves . really intrested in your shop hate to say it but didnt know you where local . + if im going to show up at the next meet in a few weeks it would be nice to know someone lol

oh and pick me! love to have my car dynoed

thanks guys,
carl

Looking forward to meeting some folks tomorrow. I'll be at the starbucks cars and coffee - white 1M - until around 10 AM and then i'll head to the shop.

In regards to the dyno.... i'll give some free dyno pulls to EVERYONE that shows up at the cars and coffee and then comes by the shop. Here is the only bad news - the dyno "might" be busy all day tomorrow. But, i will honor the pulls later. My plan is to put together an all BMW dyno day sometime in the near future to kick off the release of BMW COBB Tuning software.

Really wanted to tune the 1M before tomorrow but the week has just been too busy.

[pentaxis]

went down to Cobb today. Decent turnout. How did the meet at Cascade go? Should have all condensed at one place

[marv85]

Originally Posted by pentaxis

went down to Cobb today. Decent turnout. How did the meet at Cascade go? Should have all condensed at one place

What time were you at COBB?

The meet was cool. It's always nice to meet locals and to put a face behind forum nicknames!

[philthy84]

Yup was nice to meet everyone. I'm looking forward to the future meets.

[marv85]

Originally Posted by philthy84

Yup was nice to meet everyone. I'm looking forward to the future meets.

Were you in the tanasbourne area after the meet? I thought I saw your car

[philthy84]

Originally Posted by marv85

Were you in the tanasbourne area after the meet? I thought I saw your car

Yes I was, haha good eye. I was grabbing some to go for lunch from PF Changs. Where were you at, since I didn't see you? You'll always see me around this area since I live close by.

[cwarren]

Hey guys , had fun at the meet sould be more of us the next time around do me a favor since im terrable at the name thing list names and log in names so i can put the face to the names agian !lol
cant wait for the dyno day

carl

[Baileyatcobb]

I've got everyone's email so i will contact you directly about a future BMW dyno day. Once we set a date i'll announce it here to bring in as many folks as possible.

It was really great to meet everyone today..... i'm in love with that 458. Anyone else have some car lust happening this AM. And the 335is. That was beautiful too.

Thanks again folks
Tim Bailey

[philthy84]

Originally Posted by Baileyatcobb

I've got everyone's email so i will contact you directly about a future BMW dyno day. Once we set a date i'll announce it here to bring in as many folks as possible.

It was really great to meet everyone today..... i'm in love with that 458. Anyone else have some car lust happening this AM. And the 335is. That was beautiful too.

Thanks again folks
Tim Bailey

The 458 and the R8 had me drooling haha. My first time getting a chance to really look at them upclose and check them out.

Thanks for the compliment on my 335is, can't wait to find out what she's putting out on the dyno stock. And your 1M is beautiful as well!

[marv85]

Originally Posted by philthy84

Yes I was, haha good eye. I was grabbing some to go for lunch from PF Changs. Where were you at, since I didn't see you? You'll always see me around this area since I live close by.

I was on the cornell and stucki intersection and you took a right there (Chipotle)

[marv85]

Originally Posted by Baileyatcobb

I've got everyone's email so i will contact you directly about a future BMW dyno day. Once we set a date i'll announce it here to bring in as many folks as possible.

It was really great to meet everyone today..... i'm in love with that 458. Anyone else have some car lust happening this AM. And the 335is. That was beautiful too.

Thanks again folks
Tim Bailey

Tim Thanks for the tour and we're looking forward for the BMW dyno day
the 458 is to die for, but the R8 isn't bad either

[marv85]

Originally Posted by philthy84

The 458 and the R8 had me drooling haha. My first time getting a chance to really look at them upclose and check them out.

Thanks for the compliment on my 335is, can't wait to find out what she's putting out on the dyno stock. And your 1M is beautiful as well!

Might as well get a COBB tune then dyno baseline vs stage 1

[cstmx_ryder]

It was nice meeting everyone Saturday. Look forward to seeing you guys at the upcoming meet!

Monday bump....lol

[marv85]

Originally Posted by cstmx_ryder

It was nice meeting everyone Saturday. Look forward to seeing you guys at the upcoming meet!

Monday bump....lol

I think I saw your car passing by Ruby Tuesday's, was it you??

[cstmx_ryder]

Originally Posted by marv85

I think I saw your car passing by Ruby Tuesday's, was it you??

No....LOL

[marv85]

Originally Posted by cstmx_ryder

No....LOL

Hahaha, same car... white, black rims... LOL

[cstmx_ryder]

Originally Posted by marv85

Hahaha, same car... white, black rims... LOL

my rims aren't black either......lol.