E90Post
 


 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Technical Forums > DIY Guides > DIY M3/OEM Upper & Lower Control Arms



Reply
 
Thread Tools Search this Thread
      08-14-2016, 12:00 PM   #89
SmellyGreek
Second Lieutenant
SmellyGreek's Avatar
United_States
25
Rep
234
Posts

Drives: Estoril Blue F22 M235i
Join Date: Apr 2011
Location: Medford, MA

iTrader: (2)

Garage List
Quote:
Originally Posted by LMB335IS View Post
A dremel with is small grinding stone will work.
That did the trick, thanks! Got car aligned, feels great now.
Appreciate 0
      08-19-2016, 10:34 AM   #90
nickitp
New Member
4
Rep
15
Posts

Drives: 335i
Join Date: Mar 2016
Location: Arlington

iTrader: (0)

Red face HAALLLPP!!

Ok so after ordering all the recommended parts I get it all together (drivers side first) and the passenger side is a pita to get on. After muscling the parts on my wheels are sitting far back in the arches and are both pointed at a 15-20 degree angle outwards! Where the hell did I go wrong?

Might also mention this is a 335i e93 and I also changed out the strut for koni yellow and springs are eibach pro.

Last edited by nickitp; 08-19-2016 at 10:36 AM.. Reason: added info
Appreciate 0
      09-06-2016, 07:15 PM   #91
DarrenO
New Member
United Kingdom
3
Rep
23
Posts

Drives: E92 335d
Join Date: Aug 2016
Location: Dunstable & Kettering

iTrader: (0)

Quote:
Originally Posted by nickitp View Post
Ok so after ordering all the recommended parts I get it all together (drivers side first) and the passenger side is a pita to get on. After muscling the parts on my wheels are sitting far back in the arches and are both pointed at a 15-20 degree angle outwards! Where the hell did I go wrong?

Might also mention this is a 335i e93 and I also changed out the strut for koni yellow and springs are eibach pro.
Fitted all the front arms myself (recently changed to Bilstein B6's, so removed top pin). Straight away it had pushed the back out resulting in changing the tracking. Both towing in massively so had to do a rough guage until it goes in on Friday to get aligned properly. Hoping all negative camber gets sorted to somewhat near to M3 all round.

Fingers crossed its sharpe and very responsive unlike before! I can then get on with ordering my new steering wheel👌🏻
Appreciate 0
      09-07-2016, 10:54 AM   #92
nanoo
Enlisted Member
8
Rep
38
Posts

Drives: e90 335xi
Join Date: Apr 2016
Location: FL

iTrader: (0)

Is there a M3 control arm kit for e90 xi?
Appreciate 0
      10-04-2016, 04:31 AM   #93
335ithrust
New Member
2
Rep
11
Posts

Drives: E93 335i
Join Date: Jun 2015
Location: Australia

iTrader: (0)

TRW Control Arms - E93

Hi Guys, my upper and lower control arms arrived and intend installing them this weekend. I have been reading several posts that mention filing/Dremel burrs so the control arm will slide into the sub-frame. Wondering if I would expect the same or happens on occasion?
Appreciate 0
      10-16-2016, 09:58 AM   #94
madmantwo
Second Lieutenant
madmantwo's Avatar
94
Rep
233
Posts

Drives: 2010 e92 335i
Join Date: Nov 2015
Location: Seattle

iTrader: (1)

Quote:
Originally Posted by chriscpurr View Post
Hi Guys, my upper and lower control arms arrived and intend installing them this weekend. I have been reading several posts that mention filing/Dremel burrs so the control arm will slide into the sub-frame. Wondering if I would expect the same or happens on occasion?
Try knocking them in with a mallet first. I was able to get the driver's side ones on without any grinding, but the passenger's side one started digging into the subframe so I had to grind it down and slide it in after that. You should be able to get away with no grinding if you're careful
__________________
2010 BSM 335i 6MT M-Sport w/ MMP Stage 3 Turbos
Appreciate 0
      10-19-2016, 03:08 PM   #95
JoeyH335i
Lieutenant
JoeyH335i's Avatar
United_States
87
Rep
422
Posts

Drives: 2009 BMW 335i
Join Date: Apr 2014
Location: Houston, TX

iTrader: (0)

Quote:
Originally Posted by nickitp
Ok so after ordering all the recommended parts I get it all together (drivers side first) and the passenger side is a pita to get on. After muscling the parts on my wheels are sitting far back in the arches and are both pointed at a 15-20 degree angle outwards! Where the hell did I go wrong?

Might also mention this is a 335i e93 and I also changed out the strut for koni yellow and springs are eibach pro.
j
15 to 20 degree angle! How does that happen?
I can see a 2 to 5 degree outward angle if something was done wrong but not that much.

Mine were done and I had the strut tower redrilled to clock the strut to get the angles right.

Below are 15 degree and 20 degree angles just to show how much that would push out the tires.
Attached Images
  
__________________


I am just here to help!
Appreciate 0
      12-01-2016, 06:28 PM   #96
tdavis42
Captain
tdavis42's Avatar
181
Rep
657
Posts

Drives: 08 E90 328i ZSP AT
Join Date: Feb 2016
Location: Phoenix, AZ

iTrader: (0)

Garage List
2008 328i  [0.00]
Is that 18.7" the same for non-sport, sport, and Msport suspension?
Appreciate 0
      12-10-2016, 10:03 PM   #97
F31cruisin
Lieutenant
47
Rep
465
Posts

Drives: 330i
Join Date: Jan 2011
Location: Florida

iTrader: (11)

Just did this upgrade, and so far so good. I also did the BMW performance shocks at the same time.

Also, in case anyone is about to do this, I have the headlight leveling arm thats needed for this upgrade, You really only need the piece to bolt into the arm. If anyone needs this, and do not want to spend the $30 for a whole arm, message me.
Appreciate 0
      03-16-2017, 11:55 AM   #98
tadaska
Major
tadaska's Avatar
United Kingdom
114
Rep
1,001
Posts

Drives: 2006 E90 320D ES
Join Date: May 2016
Location: Eastbourne

iTrader: (0)

Thinking of doing this on my car but there is something I can't understand... if the M3 control arm is shorter how does it give more negative camber? I thought it would have to be longer and push the hub out a bit to give more negative camber
Appreciate 0
      03-16-2017, 01:35 PM   #99
mweisdorfer
Major General
mweisdorfer's Avatar
United_States
1900
Rep
6,968
Posts

Drives: 2007 Black/Black 335i e90
Join Date: Apr 2011
Location: Holly, MI

iTrader: (0)

Garage List
2007 BMW E90 335i  [0.00]
2008 bmw x5  [0.00]
Quote:
Originally Posted by tadaska View Post
Thinking of doing this on my car but there is something I can't understand... if the M3 control arm is shorter how does it give more negative camber? I thought it would have to be longer and push the hub out a bit to give more negative camber
The m3 control arms are longer
Appreciate 0
      03-16-2017, 01:53 PM   #100
tadaska
Major
tadaska's Avatar
United Kingdom
114
Rep
1,001
Posts

Drives: 2006 E90 320D ES
Join Date: May 2016
Location: Eastbourne

iTrader: (0)

Quote:
Originally Posted by mweisdorfer View Post
The m3 control arms are longer
There is a picture of the OEM arm and M3 arm side by side in the op and the M3 looks shorter. Have they been marked wrong or are my eyes deceiving me?
Appreciate 0
      03-16-2017, 02:00 PM   #101
mweisdorfer
Major General
mweisdorfer's Avatar
United_States
1900
Rep
6,968
Posts

Drives: 2007 Black/Black 335i e90
Join Date: Apr 2011
Location: Holly, MI

iTrader: (0)

Garage List
2007 BMW E90 335i  [0.00]
2008 bmw x5  [0.00]
Quote:
Originally Posted by tadaska View Post
Quote:
Originally Posted by mweisdorfer View Post
The m3 control arms are longer
There is a picture of the OEM arm and M3 arm side by side in the op and the M3 looks shorter. Have they been marked wrong or are my eyes deceiving me?
The upper control arms for the M3 do not have as much bend in them, if you look really close.

The m3 lower control arms are straight all the way through, where as the OEM 335i control arms have a bend at the end.

The lack of bend at all or reduced curve makes them longer and gives you a -.75 camber. It has to be longer or you would not get a negative camber.
Appreciate 2
tadaska113.50
      03-16-2017, 02:20 PM   #102
tadaska
Major
tadaska's Avatar
United Kingdom
114
Rep
1,001
Posts

Drives: 2006 E90 320D ES
Join Date: May 2016
Location: Eastbourne

iTrader: (0)

Quote:
Originally Posted by mweisdorfer View Post
The upper control arms for the M3 do not have as much bend in them, if you look really close.

The m3 lower control arms are straight all the way through, where as the OEM 335i control arms have a bend at the end.

The lack of bend at all or reduced curve makes them longer and gives you a -.75 camber. It has to be longer or you would not get a negative camber.
Oh I see, it's the lower ones. I was looking at the upper... I thought it was them that gave negative camber. My bad. It's all new to me.

I'm looking to refresh my suspension (arms/bushes/balljoints) to tighten things up a bit. It's the full height suspension, I don't want to lower it. I am after a nice sophisticated feeling ride. Some people say the M3 arms make it feel a bit harsh. What do you guys think? OEM or M3? I don't really do fast driving anymore.
Appreciate 0
      03-16-2017, 06:37 PM   #103
mweisdorfer
Major General
mweisdorfer's Avatar
United_States
1900
Rep
6,968
Posts

Drives: 2007 Black/Black 335i e90
Join Date: Apr 2011
Location: Holly, MI

iTrader: (0)

Garage List
2007 BMW E90 335i  [0.00]
2008 bmw x5  [0.00]
Quote:
Originally Posted by tadaska View Post
Quote:
Originally Posted by mweisdorfer View Post
The upper control arms for the M3 do not have as much bend in them, if you look really close.

The m3 lower control arms are straight all the way through, where as the OEM 335i control arms have a bend at the end.

The lack of bend at all or reduced curve makes them longer and gives you a -.75 camber. It has to be longer or you would not get a negative camber.
Oh I see, it's the lower ones. I was looking at the upper... I thought it was them that gave negative camber. My bad. It's all new to me.

I'm looking to refresh my suspension (arms/bushes/balljoints) to tighten things up a bit. It's the full height suspension, I don't want to lower it. I am after a nice sophisticated feeling ride. Some people say the M3 arms make it feel a bit harsh. What do you guys think? OEM or M3? I don't really do fast driving anymore.
M3. They don't cost a whole lot more. The steering wheel will tighten up a lot.

Get them from FCP Euro. I'd also do the tie rods too. That's a "while you are in there" item.
Appreciate 1
tadaska113.50
      03-17-2017, 12:21 AM   #104
sd306
Captain
sd306's Avatar
United_States
379
Rep
641
Posts

Drives: X5 40i
Join Date: Sep 2015
Location: USA

iTrader: (0)

Thank you for this! Along with spacers the handling is and fixed my steering wheel shaking issue!

Alignment is needed after +1000000 on this, I could barely drive the damn thing after and had alignment setup for 7am next day. After you first drive it you will think you installed the arms backwards...lol
__________________
X5 40i
Appreciate 1
      03-17-2017, 09:56 AM   #105
tadaska
Major
tadaska's Avatar
United Kingdom
114
Rep
1,001
Posts

Drives: 2006 E90 320D ES
Join Date: May 2016
Location: Eastbourne

iTrader: (0)

Quote:
Originally Posted by mweisdorfer View Post
M3. They don't cost a whole lot more. The steering wheel will tighten up a lot.

Get them from FCP Euro. I'd also do the tie rods too. That's a "while you are in there" item.
You tilted the scale in favour of the M3. This morning on the way to work I drove round the roundabouts faster than normal and the front handling felt disconnected from the steering and dull. I just ordered M3 arms from eBay (I am in the UK so no FCP Euro for me, though I like their website, over here online car part websites are so bad). But I forgot about the tie rods... Should I replace the inners as well? My car has almost 130k miles. Also shoyuld I get the M3 tie rods or just normal ones?
Appreciate 0
      03-17-2017, 10:00 AM   #106
mweisdorfer
Major General
mweisdorfer's Avatar
United_States
1900
Rep
6,968
Posts

Drives: 2007 Black/Black 335i e90
Join Date: Apr 2011
Location: Holly, MI

iTrader: (0)

Garage List
2007 BMW E90 335i  [0.00]
2008 bmw x5  [0.00]
Quote:
Originally Posted by tadaska View Post
Quote:
Originally Posted by mweisdorfer View Post
M3. They don't cost a whole lot more. The steering wheel will tighten up a lot.

Get them from FCP Euro. I'd also do the tie rods too. That's a "while you are in there" item.
You tilted the scale in favour of the M3. This morning on the way to work I drove round the roundabouts faster than normal and the front handling felt disconnected from the steering and dull. I just ordered M3 arms from eBay (I am in the UK so no FCP Euro for me, though I like their website, over here online car part websites are so bad). But I forgot about the tie rods... Should I replace the inners as well? My car has almost 130k miles. Also shoyuld I get the M3 tie rods or just normal ones?
You can't buy m3 tie rods. Lemforder is the OEM provider; they will be much cheaper than OEM BMW. Last, you should also replace the sway bar end links too. Another "while you are in there deal". Again, Lemforder is the OEM provider, and they will be much cheaper than the ones made by Lemforder but have a little BMW sticker on them

Yes, if you have 130k on your car, I would replace them. They are probably not dead yet, but by 160k or 100,000 miles they will be.
Appreciate 1
tadaska113.50
      03-17-2017, 10:09 AM   #107
tadaska
Major
tadaska's Avatar
United Kingdom
114
Rep
1,001
Posts

Drives: 2006 E90 320D ES
Join Date: May 2016
Location: Eastbourne

iTrader: (0)

Quote:
Originally Posted by mweisdorfer View Post
You can't buy m3 tie rods. Lemforder is the OEM provider; they will be much cheaper than OEM BMW. Last, you should also replace the sway bar end links too. Another "while you are in there deal". Again, Lemforder is the OEM provider, and they will be much cheaper than the ones made by Lemforder but have a little BMW sticker on them

Yes, if you have 130k on your car, I would replace them. They are probably not dead yet, but by 160k or 100,000 miles they will be.
Just had a quick look on eBay and for what they cost it would be silly not to replace the inner ones. I will leave the swaybar links as they are for now. Eventually I will be getting new shocks/springs and might decide to lower or maybe fit an M3 ARB... I'll do it later. Arms and tie rods will do for now. Any idea if I can remove the inner tie rod without a special tool? Will I be able to get in there just with a spanner?
Appreciate 0
      03-17-2017, 03:49 PM   #108
mweisdorfer
Major General
mweisdorfer's Avatar
United_States
1900
Rep
6,968
Posts

Drives: 2007 Black/Black 335i e90
Join Date: Apr 2011
Location: Holly, MI

iTrader: (0)

Garage List
2007 BMW E90 335i  [0.00]
2008 bmw x5  [0.00]
Quote:
Originally Posted by tadaska View Post
Quote:
Originally Posted by mweisdorfer View Post
You can't buy m3 tie rods. Lemforder is the OEM provider; they will be much cheaper than OEM BMW. Last, you should also replace the sway bar end links too. Another "while you are in there deal". Again, Lemforder is the OEM provider, and they will be much cheaper than the ones made by Lemforder but have a little BMW sticker on them

Yes, if you have 130k on your car, I would replace them. They are probably not dead yet, but by 160k or 100,000 miles they will be.
Just had a quick look on eBay and for what they cost it would be silly not to replace the inner ones. I will leave the swaybar links as they are for now. Eventually I will be getting new shocks/springs and might decide to lower or maybe fit an M3 ARB... I'll do it later. Arms and tie rods will do for now. Any idea if I can remove the inner tie rod without a special tool? Will I be able to get in there just with a spanner?
If you decide to lower it, get the Bilstein B12 kit. You will need to get adjustable sway bar links if you lower the car. Hotckiss makes a great kit for front and rear.

http://www.hotchkis.net/product/e92-...r-endlink-kit/
Appreciate 2
tadaska113.50
mantis276.00
      07-23-2017, 03:58 AM   #109
N54CoupeHP
Captain
N54CoupeHP's Avatar
United_States
71
Rep
648
Posts

Drives: 2012 335is
Join Date: Aug 2011
Location: United States

iTrader: (0)

Garage List
2012 335is  [9.66]
Quote:
Originally Posted by robc1976 View Post
Note:

Very easy tutorial, hope this is of help to somone!

Rob
Thanks for the DIY! Question; how wide of a tire would you guess could fit on a 10 inch wide rear wheel? I want to go 295 in the back on a 19 inch wheel. Thanks
__________________
2012 E92 335is | BSM/Coral Red | Moonroof Delete | 6MT
BQ Tuning | ar design DPs | M Performance Spoiler | Michelin PSS | Cyba Ram Air | VRSF CP | Fuel-It! Stg 2 LPFP
Split Armrest | LUX Reverse Lights | Rear Fog Lights Enabled
TOOK DELIVERY 24 OCT 2011 [FIRST PICS] [INTERIOR PICS]
Appreciate 0
      08-13-2017, 06:04 PM   #110
The Nightman
Cometh
The Nightman's Avatar
1067
Rep
1,284
Posts

Drives: Boy's Soul
Join Date: Jul 2016
Location: Boy's Hole

iTrader: (4)

Garage List
Thanks for the DIY. Just replaced my tension struts and wishbones on my 2009 E90 328i with 70k miles and it only took 2 hours at a slow pace. My tension strut bushings were both leaking and I started noticing that the steering feel wasn't as tight as it used to be. My wishbones were still fine though. For whatever it's worth, the factory control arms on my E90 were TRW.

I didn't want to deal with M3 wishbones (new headlight level, issues fitting the bushing end into the subframe and an alignment) so I just used the TRW M3 tension struts with new Lemforder stock wishbones. The M3 and stock tension struts are the exact same dimension so no alignment is needed. This is a sensible compromise as my original wishbones were still in good condition. The fluid filled bushing on the tension strut are the main problem, which is addressed with the M3 tension strut.

The M3 tension struts alone are a great upgrade. Handling is much tighter and more responsive to steering input. Fore and aft movement is reduced and the car feels rock solid under heavy braking when it would previously wander. Road feel is increased and so is NVH, with slightly harsher bumps and a bit more vibrations transmitted to the cabin. I have Michelin AS3s for reference.

I soaked all the hardware with penetrating fluid overnight and my Mastercraft 7.5A impact wrench (240 ft-lb max) took the 21mm balljoint locknuts off without any issues. A short extension was required to access the wishbone balljoint nuts.

All parts were from FCP who pricematched RMEuropean.

Leaky tension strut bushings at 70k miles:


Stock tension strut vs. M3 tension strut:




Last edited by The Nightman; 08-18-2017 at 01:48 AM..
Appreciate 3
mantis276.00
spencers199.00
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 01:10 PM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST