[danskiii]

Can anyone send me a direct download link for 2021-1 premium europe west and east? Not able to download torrent

[J0K3R5]

Originally Posted by danskiii

Can anyone send me a direct download link for 2021-1 premium europe west and east? Not able to download torrent

pm sent

[jwilalex]

Anyone had eyes on the 2021-2 (or 2022-1 maybe) yet. It seems ages ago that 21-1 was released.

[undecided1]

Originally Posted by jwilalex

Anyone had eyes on the 2021-2 (or 2022-1 maybe) yet. It seems ages ago that 21-1 was released.

2021-2 Not happening, can see Next skips to 2022-1, weirdly no entry for premium at all but there must be one coming surely, were still fitting premium to cars as recently as 2016... timings all over the place but sometime Oct-Dec likely.

[Crashdummyy31]

Originally Posted by J0K3R5

pm sent

Can you send me the link please too ?

[J0K3R5]

Originally Posted by jwilalex

Anyone had eyes on the 2021-2 (or 2022-1 maybe) yet. It seems ages ago that 21-1 was released.

post 29

https://www.e90post.com/forums/showt...1847924&page=2

[jwilalex]

Cheers J0K3R5, unfortunately that link refers to the ROUTE version and not the (sounding ever more unlikely) CIC PREMIUM. Not that there’s been a load of change round my way, but I always like to have the most up to date version going,

I think BMW are potentially starting to phase out these older map updates even if some are only 5-7 years old.

[RedTony]

Originally Posted by tomgrey

This was not quite as easy as others have suggested, (but not difficult). The following may help:

1. You will need to download the 1b.hex file to your pc and then EXTRACT to root of a USB stick. The file can be found here. https://www.e90post.com/forums/showthread.php?t=1461515
2. Read and follow the instruction file that is on the USB stick, once you have extracted the .zip file.
3. Whilst there (on e90 thread) you also need to download the bmw_cic_fsc_generator.zip and extract to your PC.
4. Then take the USB stick and stick it into the glove box usb whilst the ignition is on and after about 30 secs the file you need will have been downloaded to the USB stick. There is no indication from the car that anything has happened. And if it does not happen first time, try again and also, as suggested by the notes file in the downloaded zip file, try another usb. You will be successful in the end.

....Meantime on the PC extract the bmw_cic_fsc_generator to a folder on your PC. Then run the 'application' (exe. File) you see in the new folder.

5. The top option in fsc generator is to enter a file location, so enter the location of the USB stick that has the new 1b.hex file that you have on the USB stick you put in your glove box usb drive.
6. Then you will need to select the options from the drop downs in the generator. These are all self explanatory as they have drop downs to select.
7. Get the code from the generator and write it down or save it to your PC in a notepad file.
8. Now you need to have the 2019-2 maps update. To get this I had to install torrent and then download it. This was all reasonably straightforward and as I do not us torrent or other peer to peer file sharing, once I had it I deleted torrent from my PC, just as a precaution.
9. So I had 2019-2 downloaded and copied it to a usb. I made a mistake and created a folder on the usb and then downloaded to that folder. That did not work when I plugged it into the car, so I deleted the folder and as instructed downloaded to the root of the USB. The result is that the USB has one folder and 1 file. You should have a pkgdb folder and a config.nfm file.
10. With the folder and file on the USB drive, then all you need to do is plug the USB stick into the glovebox usb port and wait. The screen will alert you that it has found an update and do you want to install it.
11. Confirm you want to install it and you will be asked for the activation code. Now you enter the code that you got from the generator (Step 7 above).
12. After a slight pause the display will confirm it is updating. This takes 50 minutes.

I did the update whilst driving and all was okay. I stopped twice and once cancelled the update and then started again. The second time I left the ignition on and when I came back to the car, the ignition had turned off. When I Started I was asked if I wanted to update again and when I said yes, the updated started from where it left off.
Note: If you cancel the update and then restart like me, you do not need to enter the long activation code again.
I hope this helps those that are less confident with grapping files and whacking stuff into your car willy nilly.

Thanks to everyone for this and I hope this might help someone.

This is a perfect tutorial and should be made a sticky. Kudos Tom.

[undecided1]

Ps 2022 map is out and about now. Sadly down to one release a year on premium now

[mjn77]

Any links?

[ValSolo]

Found one here
https://mhhauto.com/Thread-Road-Map-...2022-1-torrent

Haven`t uploaded to the car yet.

UPD: checked, all works just fine.

[jwilalex]

I used the above source and installed last Monday, it works a treat no issues.

[biturbo]

Originally Posted by tomgrey

This was not quite as easy as others have suggested, (but not difficult). The following may help:

1. You will need to download the 1b.hex file to your pc and then EXTRACT to root of a USB stick. The file can be found here. https://www.e90post.com/forums/showthread.php?t=1461515
2. Read and follow the instruction file that is on the USB stick, once you have extracted the .zip file.
3. Whilst there (on e90 thread) you also need to download the bmw_cic_fsc_generator.zip and extract to your PC.
4. Then take the USB stick and stick it into the glove box usb whilst the ignition is on and after about 30 secs the file you need will have been downloaded to the USB stick. There is no indication from the car that anything has happened. And if it does not happen first time, try again and also, as suggested by the notes file in the downloaded zip file, try another usb. You will be successful in the end.

....Meantime on the PC extract the bmw_cic_fsc_generator to a folder on your PC. Then run the 'application' (exe. File) you see in the new folder.

5. The top option in fsc generator is to enter a file location, so enter the location of the USB stick that has the new 1b.hex file that you have on the USB stick you put in your glove box usb drive.
6. Then you will need to select the options from the drop downs in the generator. These are all self explanatory as they have drop downs to select.
7. Get the code from the generator and write it down or save it to your PC in a notepad file.
8. Now you need to have the 2019-2 maps update. To get this I had to install torrent and then download it. This was all reasonably straightforward and as I do not us torrent or other peer to peer file sharing, once I had it I deleted torrent from my PC, just as a precaution.
9. So I had 2019-2 downloaded and copied it to a usb. I made a mistake and created a folder on the usb and then downloaded to that folder. That did not work when I plugged it into the car, so I deleted the folder and as instructed downloaded to the root of the USB. The result is that the USB has one folder and 1 file. You should have a pkgdb folder and a config.nfm file.
10. With the folder and file on the USB drive, then all you need to do is plug the USB stick into the glovebox usb port and wait. The screen will alert you that it has found an update and do you want to install it.
11. Confirm you want to install it and you will be asked for the activation code. Now you enter the code that you got from the generator (Step 7 above).
12. After a slight pause the display will confirm it is updating. This takes 50 minutes.

I did the update whilst driving and all was okay. I stopped twice and once cancelled the update and then started again. The second time I left the ignition on and when I came back to the car, the ignition had turned off. When I Started I was asked if I wanted to update again and when I said yes, the updated started from where it left off.
Note: If you cancel the update and then restart like me, you do not need to enter the long activation code again.
I hope this helps those that are less confident with grapping files and whacking stuff into your car willy nilly.

Thanks to everyone for this and I hope this might help someone.

This a very useful guide for someone who understands modern stuff, it might as well be in up country Swahli for me

I need to update the Satnav for both my E93 and F31 both running original maps. But I do not have a clue. I bought a connected drive package for my F33 then sold it before I updated the Map, BMW tell me that I can not use it on my F31
Is there anyone out there in Sussex who can take pity on an old duffer and help me update my Maps. Beer tokens supplied

I am also in need of some one who can retro fit Power fold mirrors to my E93 and Fit reverse cameras to both cars.
Any help would be appreciated.

[mjn77]

West and East Premium 2022-1 here;

https://mega.nz/folder/gkYQ2LzZ#83hZ8jpCbtrPx4Z8L_OVRg

[Karlos20945]

Is there anyway to download the new maps that doesn't involve signing up to an app or another forum? I'm after a simple torrent link ideally.

[jwilalex]

Europe West PREMIUM USB 2022-1.7z torrent file.

Its a 7z file zipped as a .zip so it could be attached.

[Karlos20945]

Originally Posted by jwilalex

Europe West PREMIUM USB 2022-1.7z torrent file.

Its a 7z file zipped as a .zip so it could be attached.

Yes but I couldn't access it as I'm not a member of that forum. I tried to join but that was a faff too. I'm not the best at computing stuff to be fair.

[jwilalex]

Originally Posted by Karlos20945

Yes but I couldn't access it as I'm not a member of that forum. I tried to join but that was a faff too. I'm not the best at computing stuff to be fair.

That zipped file has nothing to do with any forum it's purely a torrent file zipped up. Just extract the zipped file to a folder, open it up and use what ever torrent app/program you use (i.e. Bitlord) to download the mapping.

[Karlos20945]

Originally Posted by jwilalex

That zipped file has nothing to do with any forum it's purely a torrent file zipped up. Just extract the zipped file to a folder, open it up and use what ever torrent app/program you use (i.e. Bitlord) to download the mapping.

Ok. I'll give it another go and see how I get on.

[Karlos20945]

I've given it another go and it's downloading nicely. I've no idea what I was doing wrong before but it's working now. Thank you so much for your help with this.

[jwilalex]

Your welcome

[m1nh]

Originally Posted by mjn77

West and East Premium 2022-1 here;

https://mega.nz/folder/gkYQ2LzZ#83hZ8jpCbtrPx4Z8L_OVRg

do you have a rapidshare link ?