E90Post
 


Coby Wheel
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Powertrain and Drivetrain Discussions > N57 / M57 Turbo Diesel Discussions - 335d > ATM BMW 335D Intake Kit



Reply
 
Thread Tools Search this Thread
      04-19-2018, 10:15 AM   #23
335stoner
BRR tuned
220
Rep
646
Posts

Drives: 335D black
Join Date: Nov 2016
Location: cypress tx

iTrader: (0)

Quote:
Originally Posted by PitaMan View Post
Anyone have issues popping codes after install? I installed in stock 335d and got a P0101 and P0402 and went into limp mode. It was fine until i got on it then it went into limp mode. I removed the MAF sensor and cleaned it then tried it again and the same thing happen again. I reinstalled the stock air box and had no codes or issue.
i have not studied one yet, so i do not know if this is possible..

when i had my Tacoma there was an awesome intake.. yada yada yada..

some people had issues with MAF codes and the cause what the air filter was too far back on the intake tube. the placement somehow caused the air to swirl in the intake. the fit was to slide the filter down a tad..

now like i said i do not know if the filter has room to move around, but worth a look.
Appreciate 0
      04-21-2018, 10:31 PM   #24
PitaMan
PitaMan
2
Rep
2
Posts

Drives: BMW 335D
Join Date: Sep 2017
Location: Florida

iTrader: (0)

Quote:
Originally Posted by 335stoner View Post
i have not studied one yet, so i do not know if this is possible..

when i had my Tacoma there was an awesome intake.. yada yada yada..

some people had issues with MAF codes and the cause what the air filter was too far back on the intake tube. the placement somehow caused the air to swirl in the intake. the fit was to slide the filter down a tad..

now like i said i do not know if the filter has room to move around, but worth a look.
There not much room for the air filter to move in this setup, its rather tight. I sent an email to ATM and they said this can happen with stock tune. Now more motivation to delete and tune.
Appreciate 0
      09-14-2018, 06:34 AM   #25
Chief Orman
Major
Chief Orman's Avatar
United_States
669
Rep
1,442
Posts

Drives: 335D 2010
Join Date: Jun 2013
Location: East Bay, Nor Cal

iTrader: (0)

installed last night...pulls better, much, much less smoke and I am running the Jarek 2.8 tune. if you have the tune get this intake.
Appreciate 0
      09-17-2018, 09:42 AM   #26
Phil@BPC
Lieutenant
Phil@BPC's Avatar
463
Rep
489
Posts

Drives: E39 M5/ E30 325is
Join Date: Nov 2017
Location: Raleigh, NC

iTrader: (0)

Garage List
2003 BMW M5  [0.00]
1990 BMW 325is  [0.00]
These intakes are awesome, we have seen gains in power and in turbo noise as well.

If you guys/gals are looking for other suppliers for this intake we are a supplier for ATM as well: https://bimmerperformancecenter.com/...35d-intake-kit
Appreciate 0
      09-17-2018, 11:09 AM   #27
BlueHen335d
Enlisted Member
BlueHen335d's Avatar
United_States
8
Rep
35
Posts

Drives: 2011 335d
Join Date: Jul 2018
Location: Milford, DE

iTrader: (0)

What are the pros/cons of the oiled vs dry filter options that ATM offers? Phil, what is BPC steering people toward?
Appreciate 0
      09-28-2018, 03:28 AM   #28
Chief Orman
Major
Chief Orman's Avatar
United_States
669
Rep
1,442
Posts

Drives: 335D 2010
Join Date: Jun 2013
Location: East Bay, Nor Cal

iTrader: (0)

Quote:
Originally Posted by BlueHen335d View Post
What are the pros/cons of the oiled vs dry filter options that ATM offers? Phil, what is BPC steering people toward?
great question...anyone?
Appreciate 0
      09-28-2018, 07:04 AM   #29
335stoner
BRR tuned
220
Rep
646
Posts

Drives: 335D black
Join Date: Nov 2016
Location: cypress tx

iTrader: (0)

dry is better
Appreciate 0
      09-28-2018, 07:49 AM   #30
BlueHen335d
Enlisted Member
BlueHen335d's Avatar
United_States
8
Rep
35
Posts

Drives: 2011 335d
Join Date: Jul 2018
Location: Milford, DE

iTrader: (0)

Quote:
Originally Posted by 335stoner View Post
dry is better
The reason I asked is because on the MkIV TDIs (possibly other generations), I remember people 15 years ago on TDIClub reporting K&N filters fouling their MAF's, and I have steered clear of oiled filters ever since.

I was just curious what the wisdom is on this platform. Sounds like it may be the same.
Appreciate 0
      09-28-2018, 08:17 AM   #31
335stoner
BRR tuned
220
Rep
646
Posts

Drives: 335D black
Join Date: Nov 2016
Location: cypress tx

iTrader: (0)

Quote:
Originally Posted by BlueHen335d View Post
The reason I asked is because on the MkIV TDIs (possibly other generations), I remember people 15 years ago on TDIClub reporting K&N filters fouling their MAF's, and I have steered clear of oiled filters ever since.

I was just curious what the wisdom is on this platform. Sounds like it may be the same.
your statement about the oil is exactly why. K&N's still come over oiled from the factory.

maybe if someone bought a KN washed it and re-oiled it you could avoid the issue, but who wants to do that.

-dry filters catch the dirt and also release some dirt if it stays on the surface.

-oiled filters also catch dirt, but they also have more of a tendency to hold surface dirt because it gets stuck to the oil. instead of filtering contaminates they can more likely clog from stuff getting stuck in the oil.

think about how many little rocks and dirt is in the air box when you check the filter. I'm not saying oiled filters are bad, but they do require more service. All filter media style has its time and place.
Appreciate 1
      09-28-2018, 09:53 PM   #32
dmanb2b
Banned
2122
Rep
3,368
Posts

Drives: G07, F97, F30, E90, E46, E30
Join Date: Jul 2016
Location: NY

iTrader: (5)

Quote:
Originally Posted by 335stoner View Post
your statement about the oil is exactly why. K&N's still come over oiled from the factory.

maybe if someone bought a KN washed it and re-oiled it you could avoid the issue, but who wants to do that.

-dry filters catch the dirt and also release some dirt if it stays on the surface.

-oiled filters also catch dirt, but they also have more of a tendency to hold surface dirt because it gets stuck to the oil. instead of filtering contaminates they can more likely clog from stuff getting stuck in the oil.

think about how many little rocks and dirt is in the air box when you check the filter. I'm not saying oiled filters are bad, but they do require more service. All filter media style has its time and place.
Each has their pro's vs cons. ATM uses an S&B oiled filter, not K&N. I have been running mine for 70K miles with 121K on original MAF. I wash and re-oil the the same filter every 15K and run a filter booty...no issues, nor have I heard of any fouled MAFs from running the oiled ATM set-up. Paper filter has to be replaced. That said our MAF is hit or miss on longevity and requires changing every 70-120k miles. I bought a spare MAF when it went on sale...still sitting in garage
Appreciate 0
      06-22-2019, 04:37 PM   #33
Blown284
Tim
United_States
54
Rep
206
Posts

Drives: 2021 M440 XDrive
Join Date: Aug 2016
Location: Pasadena, Md

iTrader: (0)

Quote:
Originally Posted by ASBSECU E93 View Post
Tuned cars reflected a noticeable gain with this intake. My car was the test case.
How much did you car make before this intake and then after? Post up some dyno's. Thanks!

Also, you have stock FMIC or aftermarket?
Appreciate 0
      06-22-2019, 04:39 PM   #34
Blown284
Tim
United_States
54
Rep
206
Posts

Drives: 2021 M440 XDrive
Join Date: Aug 2016
Location: Pasadena, Md

iTrader: (0)

Also for those who have this intake... any issues driving in the rain? It might sound like a stupid question but with an open element.......
Appreciate 0
      06-22-2019, 06:02 PM   #35
RL18
Major
United_States
274
Rep
1,054
Posts

Drives: 2011 335d sport
Join Date: Nov 2017
Location: Maine

iTrader: (0)

Quote:
Originally Posted by Blown284 View Post
Also for those who have this intake... any issues driving in the rain? It might sound like a stupid question but with an open element.......
I just have an afe intake in my car. No box or anything just tossed in the biggest filter I could fit and I have never had a problem in the snow, rain, sleet. Just more air!
__________________
2011 335d tuned by B.R.R.
2011 X5 35d tuned by B.R.R.
Appreciate 0
      06-23-2019, 07:42 AM   #36
Blown284
Tim
United_States
54
Rep
206
Posts

Drives: 2021 M440 XDrive
Join Date: Aug 2016
Location: Pasadena, Md

iTrader: (0)

Quote:
Originally Posted by RL18 View Post
I just have an afe intake in my car. No box or anything just tossed in the biggest filter I could fit and I have never had a problem in the snow, rain, sleet. Just more air!
Thanks! Where can I get the AFE intake you are talking about?
Appreciate 0
      06-23-2019, 09:25 AM   #37
RL18
Major
United_States
274
Rep
1,054
Posts

Drives: 2011 335d sport
Join Date: Nov 2017
Location: Maine

iTrader: (0)

Quote:
Originally Posted by Blown284 View Post
Quote:
Originally Posted by RL18 View Post
I just have an afe intake in my car. No box or anything just tossed in the biggest filter I could fit and I have never had a problem in the snow, rain, sleet. Just more air!
Thanks! Where can I get the AFE intake you are talking about?
Heres the thread for it: https://www.bimmerpost.com/forums/sh...php?p=22132849

Atm is a really nice fitted intake too with a really nice intake box that pulls in a lot more air than stock. I just took the poor mans route with the afe intake which is twice the size of the atm and at some point I'll build a box for it to help with heat soak. Either way you can't go wrong. Both are better than stock
__________________
2011 335d tuned by B.R.R.
2011 X5 35d tuned by B.R.R.
Appreciate 0
      07-13-2019, 03:01 PM   #38
Blown284
Tim
United_States
54
Rep
206
Posts

Drives: 2021 M440 XDrive
Join Date: Aug 2016
Location: Pasadena, Md

iTrader: (0)

I have the ATM Intake installed today. Got on the car pretty hard and ended up with the "Engine Malfunction - reduced power" message LOL. First time I've seen that.

Is that due to the MAF? Any ideas?
Appreciate 0
      07-13-2019, 04:20 PM   #39
Chief Orman
Major
Chief Orman's Avatar
United_States
669
Rep
1,442
Posts

Drives: 335D 2010
Join Date: Jun 2013
Location: East Bay, Nor Cal

iTrader: (0)

probably MAF... check all your connections as well
Appreciate 0
      07-14-2019, 12:42 AM   #40
Yozh
Colonel
Yozh's Avatar
No_Country
868
Rep
2,615
Posts

Drives: 2011 335d M-Sport
Join Date: Mar 2014
Location: Wet Coast

iTrader: (4)

Quote:
Originally Posted by Blown284 View Post
I have the ATM Intake installed today. Got on the car pretty hard and ended up with the "Engine Malfunction - reduced power" message LOL. First time I've seen that.

Is that due to the MAF? Any ideas?
Pull the codes first.
Appreciate 0
      05-18-2020, 03:15 AM   #41
nick///M3
Private
28
Rep
72
Posts

Drives: G80 M3C
Join Date: Feb 2008
Location: Greece/Athens

iTrader: (0)

Does anyone know what would the "power rating" be for the atm's air filter ?

I am in the process of making a new air tube from the turbo to the air filter and was wondering if the air filter element that atm is using could be a restriction for power over 450whp. I tried looking for something else and the filters are really really big for these power level or above.

If it isn't a restriction great !!!!

If it is a restriction, then one more headache try fitting another big filter in there...
Appreciate 0
Reply

Bookmarks

Tags
335d, atm, cold air intake, noise, sound

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 04:22 PM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST