Where to get FMIC installed?

Reckless335 · 07-29-2014, 02:07 PM

I know Clem is the man to see about downpipes, but downpipes are further down on my mod list. Next up is the FMIC, and I'll more than likely be going with VRSF's 7" (which requires a little bit of modification to the bumper) since I'm running a Cobb AP, and the FMIC will allow me to run that next map. So who does FMIC installs? Does Clem do those as well? What about Luther from Flemmings Auto?

cap1 · 07-29-2014, 03:33 PM

Quote:

Originally Posted by latino1ny

I know Clem is the man to see about downpipes, but downpipes are further down on my mod list. Next up is the FMIC, and I'll more than likely be going with VRSF's 7" (which requires a little bit of modification to the bumper) since I'm running a Cobb AP, and the FMIC will allow me to run that next map. So who does FMIC installs? Does Clem do those as well? What about Luther from Flemmings Auto?

Yep Clem does FMIC install as well.

ctglass · 07-29-2014, 03:45 PM

Paul Yang - PY Motorsports - Rockville

Ubersmooth · 07-29-2014, 07:01 PM

I believe Mach V does them. Give RRT a call too.

bimmer32five · 07-29-2014, 07:38 PM

Clem! He did my fmic.

.mark · 07-29-2014, 09:04 PM

In your driveway! Honestly, it's a straight forward install. I was a bit nervous at first, but it took me little time.

I'm also a DIYer when able..

Would be more than willing to meet up with other local E9x guys to help out. I'm FBO and have done everything myself.

Reckless335 · 07-30-2014, 12:14 AM

Mark, where are you located? I'd be interested to meet up. I'm just nervous about doing it myself because of the cutting factor.

Clem · 07-30-2014, 06:21 AM

I've done over 100 IC installs and I'd be happy to help but I'm 30 minutes north of the Beltway in Howard Co.

bigdaddycane · 07-30-2014, 07:15 AM

Take it to Luther or Clem before going to any other shop. They're just as good (if not better) and much cheaper for labor rates.

cotmfk · 07-30-2014, 08:05 AM

Clem did mine well. Another recommendation for him here!

.mark · 07-30-2014, 07:40 PM

I'm in Arlington these days. Was on mobile version last night and didn't realize you were down in Newport News.

Honestly, the cutting isn't bad. I used a dremel and it took me about 15 minutes total. After that, everything is real straight forward.

Eat.Sleep.Race · 07-31-2014, 12:24 PM

I can do it, PM me if you will drive to Dumfries, VA.

Reckless335 · 07-31-2014, 01:06 PM

Quote:

Originally Posted by Clem

I've done over 100 IC installs and I'd be happy to help but I'm 30 minutes north of the Beltway in Howard Co.

Clem, distance really isn't a factor for me. I'd be coming from Southern Virginia (Newport News) anyways, but I have a place I can stay in Ashburn if I need to. I wouldn't mind the drive.

Quote:

Originally Posted by .mark

I'm in Arlington these days. Was on mobile version last night and didn't realize you were down in Newport News.

Honestly, the cutting isn't bad. I used a dremel and it took me about 15 minutes total. After that, everything is real straight forward.

Yeah, I live in Newport News, but I come to northern Virginia pretty frequently.

Quote:

Originally Posted by Eat.Sleep.Race

I can do it, PM me if you will drive to Dumfries, VA.

Haha, Dumfries is where I exit 95 when going to Ashburn. I take the Dumfries exit, then take Prince William Parkway to Manassas

But if Clem could do it that would be awesome.

Stucks · 08-01-2014, 05:18 AM

Quote:

Originally Posted by bigdaddycane

Take it to Luther or Clem before going to any other shop. They're just as good (if not better) and much cheaper for labor rates.

+1. Clems man cave garage is awesome!

bmwphill92 · 08-03-2014, 02:00 AM

Quote:

Originally Posted by .mark

In your driveway! Honestly, it's a straight forward install. I was a bit nervous at first, but it took me little time.

I'm also a DIYer when able..

Would be more than willing to meet up with other local E9x guys to help out. I'm FBO and have done everything myself.

I'll keep that in mind when I get around to doing mine!

Greatestjediever · 08-19-2014, 07:02 AM

Sorry for the bump, but is there anyone who can do an FMIC install on weekends? Finding a shop thats opened late enough on weekdays is pretty difficult and I don't really have a spare car to use if I have to leave it off somewhere for a day or two.

Eat.Sleep.Race · 08-19-2014, 11:08 AM

Quote:

Originally Posted by Greatestjediever

Sorry for the bump, but is there anyone who can do an FMIC install on weekends? Finding a shop thats opened late enough on weekdays is pretty difficult and I don't really have a spare car to use if I have to leave it off somewhere for a day or two.

Sent you a PM!

07-29-2014, 02:07 PM	#1
Reckless335 Captain 77 Rep 980 Posts Drives: '08 BSM 335i e92 Join Date: Oct 2013 Location: Norfolk iTrader: (4) Garage List 2008 BMW 335i [0.00]	Where to get FMIC installed? I know Clem is the man to see about downpipes, but downpipes are further down on my mod list. Next up is the FMIC, and I'll more than likely be going with VRSF's 7" (which requires a little bit of modification to the bumper) since I'm running a Cobb AP, and the FMIC will allow me to run that next map. So who does FMIC installs? Does Clem do those as well? What about Luther from Flemmings Auto? __________________ '08 BSM E92 335i 6MT/MHD stg 2+/VRSF 7" FMIC/VRSF CP/HKS BOV/VRSF catless DPs/BMS DCI/muffler delete/BC Extreme lows/OEM style 167s/BMS high side OCC/Mishimoto low side OCC/etc
	Appreciate 0 Tweet Quote

07-29-2014, 03:45 PM	#3
ctglass Second Lieutenant 12 Rep 216 Posts Drives: '08 335xi e90 Join Date: May 2012 Location: Northern Virginia iTrader: (5)	Paul Yang - PY Motorsports - Rockville
	Appreciate 0 Quote

07-29-2014, 07:01 PM	#4
Ubersmooth Captain 316 Rep 977 Posts Drives: E92 335i Join Date: Jul 2013 Location: NoVa iTrader: (1)	I believe Mach V does them. Give RRT a call too.
	Appreciate 0 Quote

07-29-2014, 07:38 PM	#5
bimmer32five Second Lieutenant 14 Rep 208 Posts Drives: 2011 E90 M3, 2015 X5 35i Join Date: Aug 2012 Location: Maryland iTrader: (0)	Clem! He did my fmic.
	Appreciate 1 Quote

07-29-2014, 09:04 PM	#6
.mark Private 5 Rep 76 Posts Drives: '11 335i M Sport Join Date: Sep 2013 Location: VA/NC iTrader: (3)	In your driveway! Honestly, it's a straight forward install. I was a bit nervous at first, but it took me little time. I'm also a DIYer when able.. Would be more than willing to meet up with other local E9x guys to help out. I'm FBO and have done everything myself.
	Appreciate 0 Quote

07-30-2014, 12:14 AM	#7
Reckless335 Captain 77 Rep 980 Posts Drives: '08 BSM 335i e92 Join Date: Oct 2013 Location: Norfolk iTrader: (4) Garage List 2008 BMW 335i [0.00]	Mark, where are you located? I'd be interested to meet up. I'm just nervous about doing it myself because of the cutting factor. __________________ '08 BSM E92 335i 6MT/MHD stg 2+/VRSF 7" FMIC/VRSF CP/HKS BOV/VRSF catless DPs/BMS DCI/muffler delete/BC Extreme lows/OEM style 167s/BMS high side OCC/Mishimoto low side OCC/etc
	Appreciate 0 Quote

07-30-2014, 06:21 AM	#8
Clem Major 149 Rep 1,254 Posts Drives: 2010 E90 M3 AW/FR ESS VT2 Join Date: Nov 2006 Location: MD iTrader: (4)	I've done over 100 IC installs and I'd be happy to help but I'm 30 minutes north of the Beltway in Howard Co.
	Appreciate 1 Quote

07-30-2014, 07:15 AM	#9
bigdaddycane I even mod my cereal 246 Rep 3,441 Posts Drives: 11 ZCP DCT M3 14 328d 21 GT4 Join Date: Aug 2009 Location: Northern Va iTrader: (53) Garage List 2021 Porsche GT4 [0.00] 2014 BMW 328d Xdriv ... [0.00] 2011 BMW M3 [0.00]	Take it to Luther or Clem before going to any other shop. They're just as good (if not better) and much cheaper for labor rates. __________________ 2011 Mineral White M3 ZCP - Opticoat, Ventureshield, some CF, B&B exhaust, AFE Intake Vorsteiner VFF 101s Ohlins 2014 Mineral White 328d Xdrive Wagon - Opticoat, Ventureshield, B8s, H&R, Apex SM-10s Hawk Pads 2021 718 Cayman GT4 - Fire extinguiser
	Appreciate 0 Quote

07-30-2014, 08:05 AM	#10
cotmfk Major General 2052 Rep 6,112 Posts Drives: M3 Join Date: Mar 2009 Location: Somewhere between DC and FL iTrader: (12)	Clem did mine well. Another recommendation for him here! __________________ When you say impact instead of affect/effect, you are communicating that you don't understand the difference between the two words, and are too lazy to learn.
	Appreciate 0 Quote

07-30-2014, 07:40 PM	#11
.mark Private 5 Rep 76 Posts Drives: '11 335i M Sport Join Date: Sep 2013 Location: VA/NC iTrader: (3)	I'm in Arlington these days. Was on mobile version last night and didn't realize you were down in Newport News. Honestly, the cutting isn't bad. I used a dremel and it took me about 15 minutes total. After that, everything is real straight forward.
	Appreciate 0 Quote

07-31-2014, 12:24 PM	#12
Eat.Sleep.Race Out Boosting... 242 Rep 3,987 Posts Drives: F30 335i M-Sport Join Date: Feb 2014 Location: Northern VA iTrader: (7)	I can do it, PM me if you will drive to Dumfries, VA. __________________ Alpine White M-Sport F30
	Appreciate 0 Quote

08-19-2014, 07:02 AM	#16
Greatestjediever New Member 0 Rep 7 Posts Drives: E92 335xi Join Date: Jul 2014 Location: Northern Virginia iTrader: (1)	Sorry for the bump, but is there anyone who can do an FMIC install on weekends? Finding a shop thats opened late enough on weekdays is pretty difficult and I don't really have a spare car to use if I have to leave it off somewhere for a day or two.
	Appreciate 0 Quote