[cloudz7]

After some much appreciated help from this forum I got some new wheels , I love the way they came out and wanted to share some pics to help other members I never thought this setup would fit but it did and all I did was roll rear fender . Specs are 19x8.5 up front +30 offset, and 19x10.5 in the rear with a +22 offset . I am stock suspension the only thing I have is supreme power lowering perches in the front . Car is a e93 2008 328i.

[bkwld]

The car looks superb! Very nice fitment. Stretched but works as understated.

[Emilime75]

Not very useful without also stating tire sizes, brand and model. Camber? Not too mention, you didn't only roll the rear quarters, you pulled them...a lot. It looks like you also damaged the paint some while doing so.

[cloudz7]

Front tire is 235/35/19
Rear is 265/35/19
Tire are accelera .
I am not sure what pulling quarters mean but a buddy of mine used the Eastwood fender rolling machine on the rear, there is no paint damage at all in the rear. I am on my stock camber arms I didn't change any suspension components in the rear.

[IllSic_Design]

Originally Posted by cloudz7

Front tire is 235/35/19
Rear is 265/35/19
Tire are accelera .
I am not sure what pulling quarters mean but a buddy of mine used the Eastwood fender rolling machine on the rear, there is no paint damage at all in the rear. I am on my stock camber arms I didn't change any suspension components in the rear.

No offense but it looks like he didnt do it correctly, because he did more than roll the inner fender lip/edge, which is what that tool is for. As we can see in your pic the OEM rear fender is now flared out/pulled, which is fine if you have no issues with it, but is not just a rolled fender

[cloudz7]

Oh ok got it thanks , I don't really need have a problem with it , I told him I was getting some wider wheels in the rear, so basically just told him to make sure they fit

[IllSic_Design]

Originally Posted by cloudz7

Oh ok got it thanks , I don't really need have a problem with it , I told him I was getting some wider wheels in the rear, so basically just told him to make sure them fit

Got it, that's fine and glad you're happy with it, looks good.

We mainly mentioned it because it'll help save other people trouble if they think they can just slightly roll the fenders with the setup you have, when they actually need to pull the fenders a little bit.

[Emilime75]

Originally Posted by IllSic_Design

Got it, that's fine and glad you're happy with it, looks good.

We mainly mentioned it because it'll help save other people trouble if they think they can just slightly roll the fenders with the setup you have, when they actually need to pull the fenders a little bit.

Exactly, not trying to give the OP a hard time. Just that when people find this in the future, it'll be more helpful if the info was complete and correct for those who don't know.

Are you sure the paint didn't crack? If does look like there is a thin crack right behind the flare, where the metal turns into the car. Maybe it's just an artifact in the photo.

[cloudz7]

Nope thanks guys you ennlightened me also , I thought he just rolled the fenders , but yes I am happy , you guys actually made me go outside to double check but no paint crack lol, I think it just might be a reflection of the street.

[nfriend]

Looks really clean!

[1Bad335turbopsi]

Don't forget the valve stem cap's!!...

[cloudz7]

Yea I just ordered them

[ewicky]

Looks good! Take care not to curb em'!

Originally Posted by Emilime75

Not very useful without also stating tire sizes, brand and model...

LoL not very useful comment since you could literal just look at the pictures and read that info of the side of the tire.

[Emilime75]

Originally Posted by ewicky

LoL not very useful comment since you could literal just look at the pictures and read that info of the side of the tire.

You should try using proper spelling and grammar if you want to be taken seriously. Where do you see tire sizes? I love how you take just part of the comment out of context. Are wheel offsets also somewhere in the photos?

[cloudz7]

So far so good no curbing but I am super careful when I park

[LccJ1990]

Do you know the center cap size for the cs11’s I want to put bmw ones on mines.

[Volasko]

I like it, I just wouldn't have ruined my fenders like that just to make wheels fit. To each their own I guess!

[clegg]

Those are tight!

[Meeegaaa_TRON]

wow, those look incredible on your car!

[Emilime75]

What front bumper is that with the integrated lip?

[daniel35d]

Originally Posted by Emilime75

What front bumper is that with the integrated lip?

Stock M-Sport bumper with AK Style lip molded into it would be my guess.

[cloudz7]

you got it, factory mtech bumper with ak lip molded on.