330i running but a few error codes

udfxrookie · 06-10-2021, 03:48 PM

2006 330i
Pulling:
KOMBI [KOMB87] | A3B2: Message error (terminal status, 0x130), receiver instrument panel, transmitter CAS

MOSTGW [RAD2_GW] | E194: No message, receiver CCC/MASK/RAD2, transmitter CAS

EGS [GS19B] | CF1F: No message from CAS, receiver DCT/EGS, transmitter DME-DDE/CAS

LDM/ICM [LDM_90] | 62CD: Control module: coding data; coding successful

FZD [FZD_87] | A670: No description found

I got a new key yesterday so no idea if it has anything to do with that, but WHAT are these codes and does anyone have some solutions?
I have all the software from ISTA to BimmerGeeks so if any further information is needed or diagnosis via ISTA I have no problem whatsoever.

Car start good, runs good (I have a DISA to replace, cruise control to look into and adaptive headlight issues to work on, but aside from that, EVERYTHING else is working great).

Any and all input would be helpful and greatfully appriciated.

udfxrookie · 06-10-2021, 07:10 PM

Cleared the codes and was driving for a good 20+ miles so I'm assuming those codes were created when the locksmith was making the new key =)

BashShah · 06-11-2021, 10:09 PM

You should always Scan, then write down all codes.
Then Clear.....Drive if need be and then scan again to see if the codes come back.

06-10-2021, 03:48 PM	#1
udfxrookie New Member 4 Rep 28 Posts Drives: 2006 BMW 330i Join Date: May 2021 Location: Florida iTrader: (0)	330i running but a few error codes 2006 330i Pulling: KOMBI [KOMB87] \| A3B2: Message error (terminal status, 0x130), receiver instrument panel, transmitter CAS MOSTGW [RAD2_GW] \| E194: No message, receiver CCC/MASK/RAD2, transmitter CAS EGS [GS19B] \| CF1F: No message from CAS, receiver DCT/EGS, transmitter DME-DDE/CAS LDM/ICM [LDM_90] \| 62CD: Control module: coding data; coding successful FZD [FZD_87] \| A670: No description found I got a new key yesterday so no idea if it has anything to do with that, but WHAT are these codes and does anyone have some solutions? I have all the software from ISTA to BimmerGeeks so if any further information is needed or diagnosis via ISTA I have no problem whatsoever. Car start good, runs good (I have a DISA to replace, cruise control to look into and adaptive headlight issues to work on, but aside from that, EVERYTHING else is working great). Any and all input would be helpful and greatfully appriciated.
	Appreciate 0 Tweet Quote

06-10-2021, 07:10 PM	#2
udfxrookie New Member 4 Rep 28 Posts Drives: 2006 BMW 330i Join Date: May 2021 Location: Florida iTrader: (0)	Cleared the codes and was driving for a good 20+ miles so I'm assuming those codes were created when the locksmith was making the new key =)
	Appreciate 0 Quote

06-11-2021, 10:09 PM	#3
BashShah Colonel 296 Rep 2,015 Posts Drives: 2012 335i Sedan Join Date: Oct 2012 Location: Vancouver, Canada iTrader: (0)	You should always Scan, then write down all codes. Then Clear.....Drive if need be and then scan again to see if the codes come back.
	Appreciate 0 Quote