Supercharger stuff (MILVs+AA+BPC)

Bob@BPC · 11-27-2018, 07:25 AM

Quote:

Originally Posted by hassmaschine

that's awesome. 285whp/236wtq hardly seems worth it for the cost of the kit, but your changes have basically doubled the baseline gains. I wonder how much of that is due to the addition of meth?

3lbs of boost added with the pulley giving a total of 10, IATs dropped 20F degrees with the injection give me the ability to run more ignition timing. We are currently running a MAF on this setup with no issues, as well as the MS45.x

WeekendWarriorz · 12-06-2018, 10:15 PM

Another intercooler idea, someone's car from the facebook group I'm in. N52 with supercharger and turbo, look at the intercooler piping, intercooler with inlet and outlet on the top and mounted through. Food for thought.

On another note, I have some runs of my buddies car with the blower racing a new 2015+ WRX that's FBO on a e60 blend ~370ish whp. Lost by about 1-2 cars

Noir · 12-06-2018, 10:28 PM

Quote:

Originally Posted by WeekendWarriorz

Another intercooler idea, someone's car from the facebook group I'm in. N52 with supercharger and turbo, look at the intercooler piping, intercooler with inlet and outlet on the top and mounted through. Food for thought.

On another note, I have some runs of my buddies car with the blower racing a new 2015+ WRX that's FBO on a e60 blend ~370ish whp. Lost by about 1-2 cars

I'm a part of the same group...
too many n54 purists

Hopefully getting this meth kit by January and my injectors in February. Fingers crossed!

6ixSpd · 12-06-2018, 10:31 PM

Funny. I've personally heard of a terrible, terrible instance of RK tunes on a S54 powered car and the 6 month long fiasco that was only resolved after getting confrontational. I wouldn't go near them...

Quote:

Originally Posted by WeekendWarriorz

Another intercooler idea, someone's car from the facebook group I'm in. N52 with supercharger and turbo, look at the intercooler piping, intercooler with inlet and outlet on the top and mounted through. Food for thought.

On another note, I have some runs of my buddies car with the blower racing a new 2015+ WRX that's FBO on a e60 blend ~370ish whp. Lost by about 1-2 cars

Jesus Christ that must be a goddamn never ending headache to keep that thing roadworthy.

Noir · 12-06-2018, 10:38 PM

Quote:

Originally Posted by Bob@BPC

Quote:

Originally Posted by hassmaschine

that's awesome. 285whp/236wtq hardly seems worth it for the cost of the kit, but your changes have basically doubled the baseline gains. I wonder how much of that is due to the addition of meth?

3lbs of boost added with the pulley giving a total of 10, IATs dropped 20F degrees with the injection give me the ability to run more ignition timing. We are currently running a MAF on this setup with no issues, as well as the MS45.x

benefit of MS45.x?

Taskmaster · 12-06-2018, 10:57 PM

Quote:

Originally Posted by Noir

benefit of MS45.x?

Older ECU from the M54.

Seattlesquash · 12-12-2018, 06:12 PM

Just FYI if you experience this:

- have had a slight noice during warmup and always thought it was the charger but recently noticed that there was very little clearance between plastic inlet tube and strut tower hence it rattled/made contact slightly when cold. Rotated it some to get 1" CLR and now even more silent and smooth at all temps. Might be worth a check if you hear any rattle up front. Mine was very minor, but as a fanatic it always bothered me... but no more!

Taskmaster · 12-17-2018, 09:59 AM

Quote:

Originally Posted by Bob@BPC

3lbs of boost added with the pulley giving a total of 10, IATs dropped 20F degrees with the injection give me the ability to run more ignition timing. We are currently running a MAF on this setup with no issues, as well as the MS45.x

What size pulley? I assume it's custom?

hassmaschine · 12-17-2018, 10:45 AM

Marty makes ESS pullies too..

Taskmaster · 12-17-2018, 12:07 PM

Quote:

Originally Posted by hassmaschine

Marty makes ESS pullies too..

He does, I didn’t get a chance to email him or you back, I’ve been away...

Bob@BPC · 12-17-2018, 01:20 PM

Quote:

Originally Posted by Taskmaster

What size pulley? I assume it's custom?

No, off the shelf vortech pulley. I'll see if Randall still has the part number.

Phyrexia · 12-17-2018, 02:35 PM

Quote:

Originally Posted by WeekendWarriorz

Another intercooler idea, someone's car from the facebook group I'm in. N52 with supercharger and turbo, look at the intercooler piping, intercooler with inlet and outlet on the top and mounted through. Food for thought.

On another note, I have some runs of my buddies car with the blower racing a new 2015+ WRX that's FBO on a e60 blend ~370ish whp. Lost by about 1-2 cars

Can anybody link me to a build thread for this car or mention the FB group name?

WeekendWarriorz · 12-17-2018, 02:41 PM

Quote:

Originally Posted by Phyrexia

Quote:

Originally Posted by WeekendWarriorz

Another intercooler idea, someone's car from the facebook group I'm in. N52 with supercharger and turbo, look at the intercooler piping, intercooler with inlet and outlet on the top and mounted through. Food for thought.

On another note, I have some runs of my buddies car with the blower racing a new 2015+ WRX that's FBO on a e60 blend ~370ish whp. Lost by about 1-2 cars

Can anybody link me to a build thread for this car or mention the FB group name?

Wasn't a build thread, just a post. here's the group: https://m.facebook.com/groups/112468002137607 be careful what you say you'll get attacked by many people saying "n52 is shit" "buy a 335i" "your car is slow". Also not much n52 activity in there.

Torgus · 12-18-2018, 10:47 AM

Facebook and social media brings out the best in people. Which is weird because it links to your personal profile vs. a forum you are just a name. You would think on forums it would be worse

hassmaschine · 12-18-2018, 11:19 AM

Facebook car groups are a fucking cesspool.. I feel dumber every time I look at one.

Noir · 12-18-2018, 11:30 AM

Quote:

Originally Posted by hassmaschine

Facebook car groups are a fucking cesspool.. I feel dumber every time I look at one.

Virginia's car scene page is the worst

:
Every superiority complex gathered in one page

I just share dank memes that I find relatable

Noir · 03-21-2019, 12:11 AM

3.91 LSD is here! Sitting in the garage.. Waiting for the rest of the pieces to fall into place before install.

N54 IM on its way...

Gettin' Schwiftyyyy.

Thanks Synchrotech for the assist on the diff. David is the man. Cant wait to see what it'll do for my application.

Kubricks · 03-21-2019, 02:21 AM

Quote:

Originally Posted by Noir

3.91 LSD is here! Sitting in the garage.. Waiting for the rest of the pieces to fall into place before install.

That's quite a big jump, interested to see how it all turns out.

Biginboca · 03-21-2019, 07:27 AM

Quote:

Originally Posted by Kubricks

That's quite a big jump, interested to see how it all turns out.

He’s got a 7500rpms redline... and it’s going to be a BEAST!

Noir · 03-21-2019, 07:46 AM

I am ready for the sauce, friends.
I am in the process of sourcing that finned cover you have, Biginboca.
I also want to figure out what suspension setups/kits I should be looking at since the car will be on stands anyways-

Torgus · 03-21-2019, 08:58 AM

Quote:

Originally Posted by Noir

I am ready for the sauce, friends.
I am in the process of sourcing that finned cover you have, Biginboca.
I also want to figure out what suspension setups/kits I should be looking at since the car will be on stands anyways-

What are your goals? I got a guy I can put you in contact with for a suspension.

Noir · 03-21-2019, 09:04 AM

Quote:

Originally Posted by Torgus

Quote:

Originally Posted by Noir

I am ready for the sauce, friends.
I am in the process of sourcing that finned cover you have, Biginboca.
I also want to figure out what suspension setups/kits I should be looking at since the car will be on stands anyways-

What are your goals? I got a guy I can put you in contact with for a suspension.

My goal...
Thats a tough one.
I like the m sport alot.
Would like something a bit sportier for sure..
I just want to be handle better and successfully put my power to the ground (not that its alot of power to begin with..) but I hope that helps point into some sort of a direction.

I am a total scrub in this side of stuff.
I just figured I'd look into it since I'm at 115k miles on the cars OG suspension...

12-06-2018, 10:15 PM	#728
WeekendWarriorz Captain 670 Rep 754 Posts Drives: 2006 Z4M Join Date: Jan 2017 Location: Anaheim Hills, CA iTrader: (4)	Another intercooler idea, someone's car from the facebook group I'm in. N52 with supercharger and turbo, look at the intercooler piping, intercooler with inlet and outlet on the top and mounted through. Food for thought. On another note, I have some runs of my buddies car with the blower racing a new 2015+ WRX that's FBO on a e60 blend ~370ish whp. Lost by about 1-2 cars Attached Images __________________ 2006 Z4 M Roadster Black/Imola Red, FBO VF-Engineering, e85 Flex Fuel-Sold 2012 BMW 135i N55 DCT Alpine White/Coral Red, FBO, TBI, Full e85, JB4 BEF-Sold 2006 Z4 M Roadster Black/Black-Sold 2021 M2 Competition DCT Hockenheim Silver
	Appreciate 1 dwashy64.50 Quote

12-12-2018, 06:12 PM	#733
Seattlesquash Car Enthusiast 895 Rep 1,305 Posts Drives: E92 328i 2007 SC Join Date: Nov 2011 Location: WA iTrader: (0) Garage List 2007 E92 328i ESS V ... [0.00] 2007 B7 RS4 AMD SC ... [0.00]	Just FYI if you experience this: - have had a slight noice during warmup and always thought it was the charger but recently noticed that there was very little clearance between plastic inlet tube and strut tower hence it rattled/made contact slightly when cold. Rotated it some to get 1" CLR and now even more silent and smooth at all temps. Might be worth a check if you hear any rattle up front. Mine was very minor, but as a fanatic it always bothered me... but no more! __________________ E92 328i\|6MT\|ESS SC VT-1 (G.2)\|3 stage\|22 RPD SC/Meth tune\|AA Headers\|Snow Performance Meth Injection\|Rotiform KPS\|R139\|PS4S 275.245.19\|M3 front\|M3 side skirts\|MTEC rear\|Akrapovic C tips\|Koni Sport (Yellow)\|Eibach PS\|Hotchkis SB\|C high-kick spoiler\|C mirror Covers\|C trim\|LCI tails\|M3 Control arms\|M3 MS\|Black E trim\|Black kidney's\|Full LED Conv\|BMW F30 370/345 BBK\|ECS SS\|ECS Strut Tower Brace\|034 Engine-Trans-Rear Mounts
	Appreciate 1 Noir883.00 Quote

12-17-2018, 10:45 AM	#735
hassmaschine Major General 3965 Rep 7,215 Posts Drives: "NBO" 330i Join Date: Jun 2014 Location: earth iTrader: (0)	Marty makes ESS pullies too..
	Appreciate 1 Noir883.00 Quote

12-18-2018, 10:47 AM	#740
Torgus Slow. 3782 Rep 7,151 Posts Drives: Single Turbo N54 on Meth! Join Date: Jun 2012 Location: Boston, MA iTrader: (2) Garage List 2007 BMW E92 [10.00] 2007 BMW E90 [0.00] 2006 BMW E91 [0.00]	Facebook and social media brings out the best in people. Which is weird because it links to your personal profile vs. a forum you are just a name. You would think on forums it would be worse __________________ E92 ACF ST 6466 + Meth Motiv / E70 #1 fully deleted 2.8 race flash / E70 #2 JBD / E90 & E91 both retired Psalm 144
	Appreciate 1 Noir883.00 Quote

12-18-2018, 11:19 AM	#741
hassmaschine Major General 3965 Rep 7,215 Posts Drives: "NBO" 330i Join Date: Jun 2014 Location: earth iTrader: (0)	Facebook car groups are a fucking cesspool.. I feel dumber every time I look at one.
	Appreciate 5 Noir883.00 Torgus3781.50 Phyrexia502.50 desertman1232213.50 Seattlesquash894.50 Quote

03-21-2019, 12:11 AM	#743
Noir Major 883 Rep 1,413 Posts Drives: 2006 E90 330i 6MT Join Date: Aug 2016 Location: San Antonio iTrader: (1)	3.91 LSD is here! Sitting in the garage.. Waiting for the rest of the pieces to fall into place before install. N54 IM on its way... Gettin' Schwiftyyyy. Thanks Synchrotech for the assist on the diff. David is the man. Cant wait to see what it'll do for my application. __________________ See you, space cowboy. *Supercharged*
	Appreciate 2 Torgus3781.50 Biginboca3761.50 Quote

03-21-2019, 07:46 AM	#746
Noir Major 883 Rep 1,413 Posts Drives: 2006 E90 330i 6MT Join Date: Aug 2016 Location: San Antonio iTrader: (1)	I am ready for the sauce, friends. I am in the process of sourcing that finned cover you have, Biginboca. I also want to figure out what suspension setups/kits I should be looking at since the car will be on stands anyways- __________________ See you, space cowboy. *Supercharged*
	Appreciate 0 Quote