[TiAgAu]

I have a MOST error aswell where ista resets it everytime you run it. Is that what your taking about? I'll have to check if i got the same error.

[TiAgAu]

Originally Posted by Aria335iN54

Yeh left it over night still on. And hearing it priming fuel pump once in a while.

Car is on charger so battery should be safe but Im not happy until this is sorted...

Ok. I just checked yes i get E1CD and E1CF codes. It's completely normal. and not an issue the only reason is because the cars I-level is old verse the new build date you added for CIC /Combox only way you can really fix it is by upgrading your FRM2 to FRM3 or there is one another way, but like i said it's can't be why the car's not sleeping.

any other codes?

[TiAgAu]

I also get c560. Same thing though not really an issue that would cause your problem

[Aria335iN54]

Originally Posted by GovernUrMental

Ok. I just checked yes i get E1CD and E1CF codes. It's completely normal. and not an issue the only reason is because the cars I-level is old verse the new build date you added for CIC /Combox only way you can really fix it is by upgrading your FRM2 to FRM3 or there is one another way, but like i said it's can't be why the car's not sleeping.

any other codes?

Hmmm, only E1CF.
Even C560 will not return if I dont click on TV.

It seems Im up for another drama then. Not sure where to start without any relevant codes.

[TiAgAu]

Originally Posted by Aria335iN54

Hmmm, only E1CF.
Even C560 will not return if I dont click on TV.

It seems Im up for another drama then. Not sure where to start without any relevant codes.

I guess you have already tried disconnecting battery for abit? disconnect charger first though.

Only checking with protool? Not sure if inpa or Ista will show any more info if you have it setup?

[TiAgAu]

Did you use this pinout for combox? https://www.e90post.com/forums/showp...72&postcount=4

I noticed another version where 1 wire mixed up. It seemed a mistake

[Aria335iN54]

Originally Posted by GovernUrMental

I guess you have already tried disconnecting battery for abit? disconnect charger first though.

Only checking with protool? Not sure if inpa or Ista will show any more info if you have it setup?

Actually I did accidentally disconnect battery when charge was connected and the blinkers went on and other weird things so I noticed and disconnected the charger.
Not sure if it could cause any issues, at least no codes.

[Aria335iN54]

Originally Posted by GovernUrMental

Did you use this pinout for combox? https://www.e90post.com/forums/showp...72&postcount=4

I noticed another version where 1 wire mixed up. It seemed a mistake

Yeh this one has pin 17 and 18 also swapped over by mistake but they are telemarics pins so wouldn't matter.

The PDF from Bimmer Retrofit is spot on which I found today.

[TiAgAu]

Originally Posted by Aria335iN54

Yeh this one has pin 17 and 18 also swapped over by mistake but they are telemarics pins so wouldn't matter.

The PDF from Bimmer Retrofit is spot on which I found today.

Arh thats it! I didn't realize it was just for the telematics.

mmmm strange one.

[Mc 007]

Can someone help,have trouble with microphone from when i install combox,no one hear me,but other things are ready
Thx

[TiAgAu]

Originally Posted by Mc 007

Can someone help,have trouble with microphone from when i install combox,no one hear me,but other things are ready
Thx

So i assume you already have had Bluetooth phone calling via TCU before combox install?

[Mc 007]

Originally Posted by GovernUrMental

So i assume you already have had Bluetooth phone calling via TCU before combox install?

Yes,from factory,had mulf(no high)

[TiAgAu]

Originally Posted by Mc 007

Yes,from factory,had mulf(no high)

Did you repin from mulf to combox? Or did you use a Retrofit Plug and Play connector? Could be worth rechecking the mic pins.

specific coding performed?

[Mc 007]

Originally Posted by GovernUrMental

Did you repin from mulf to combox? Or did you use a Retrofit Plug and Play connector? Could be worth rechecking the mic pins.

specific coding performed?

Yes,repin 11, 12 & 25 are for mic,combox work,but no one can hear me

Coding by one friend

Can you tell me what parameters need and he will check

[TiAgAu]

Originally Posted by Mc 007

Yes,repin 11, 12 & 25 are for mic,combox work,but no one can hear me

Coding by one friend

Can you tell me what parameters need and he will check

Build date #0311 (Removed $633 added $644) added $6NR $6VC $6FL . Save the new FA/VO to CAS and FRM (NFRM) using FA_WRITE. Then run SG_CODIEREN on KOMBI, MEDIA and on CIC.

$639 is in the North American market; in other markets you might be removing $633 instead.

[Mc 007]

Originally Posted by GovernUrMental

Build date #0311 (Removed $633 added $644) added $6NR $6VC $6FL . Save the new FA/VO to CAS and FRM (NFRM) using FA_WRITE. Then run SG_CODIEREN on KOMBI, MEDIA and on CIC.

$639 is in the North American market; in other markets you might be removing $633 instead.

Thx

Will show to my friend and we can try

My mulf was basis,i had 5 wires on it,AUX wires comes direct from the unit