[shawnsheridan]

Originally Posted by Takfarinas

Hi guys !
Can I use the solution for an F20 (with Route Map) ?
KR

ENTRYNAV (ROUTE) Head Unit does not even have a 1B File, and there is no working ROUTE FSC Generator in public domain.

[Takfarinas]

Originally Posted by shawnsheridan

ENTRYNAV (ROUTE) Head Unit does not even have a 1B File, and there is no working ROUTE FSC Generator in public domain.

Many thanks for your answer ! Any solutions to update my maps ?
I've seen in anothier thread that a FSC Generator with Route can be send by PM ?

[shawnsheridan]

Originally Posted by Takfarinas

Many thanks for your answer ! Any solutions to update my maps ?
I've seen in anothier thread that a FSC Generator with Route can be send by PM ?

No. There is no Public ROUTE Generator. PM sent.

[nplasko]

Will this procedure work on S606 Business edition? Because the USB process didnt work for me. I never got the file generated by that process.

[opjose]

No, this only works for CIC Premium.

[aohus]

https://www.e90post.com/forums/showthread.php?t=1154524

I got 2021 premium maps working through the guide posted above. at first i was receiving an invalid fsc code but once i was able to retrieve the right one and used the fsc code generator things went smoothly. thank you community for the guide! i went from 2009 to 2021!!

[nn42day]

I have a quick message for Opjose, hope you dont me asking, but i was following the thread posted by portalseo on using a usb drive to generate the hex file, however I am not having much luck, in one of your replies you have asked asked a member "Does your CIC show the check mark?"
Where would I find this?

for reference car is a 2009 E90 LCI build date: 2009-06-02 and I have S609 Navigation System Professional (wide screen).
current maps version is ECE 401143.2.10 - Europe WEST Premium 2015-2.

Do i need to get CIC updated? if so any information on this would be much appreciated.
I have used ISTA and have an OBD to USB cable but from reading the threads sounds like i need the one OBD adaptor to Ethernet.

[opjose]

Originally Posted by nn42day

I have a quick message for Opjose, hope you dont me asking, but i was following the thread posted by portalseo on using a usb drive to generate the hex file, however I am not having much luck, in one of your replies you have asked asked a member "Does your CIC show the check mark?"
Where would I find this?

See: https://www.bimmerfest.com/attachmen...pg-jpg.486701/

Lower left red check mark...

[nuwaus]

Originally Posted by vespa

UPDATE: A simple automated method has been developed by portalseo. Just put his program on a USB stick, plug it into the glovebox, and your 1b file will appear on the stick:
http://www.e90post.com/forums/showthread.php?t=1461515

Many thanks to Rotary Rasp and many others for developing these tools and techniques, I just combined several approaches to find a 12 step program. Here goes:

1. Get a ENET cable (yes, even though e9x doesn't normally use ENET). These typically end up costing about $5 by the time you pay for shipping and everything, but you can certainly save some money by making your own. Search eBay for "bmw enet", see this example for pre-made cables, or make your own with these instructions.
2. Set your PC/Android/Mac ethernet port to IP: 169.254.199.98, subnet: 255.255.255.0, Gateway: 169.254.199.99, any DNS
3. Connect the cable and turn on the car (acc mode is fine)
4. In your web browser go to: ftp://169.254.199.99
5. It should prompt for a login, user name is "root", password is either "Hm83stN)" or "cic0803"
6. Click the link to go up a directory a couple of times then browse to /HBpersistence/normal and download the file "generalPersistencyData_DiagnosticSWTControlle r"
7. Disconnect from the car and get that file into Windows
8. Open the file in a hex editor like Hxd http://mh-nexus.de/downloads/HxDSetupEN.zip
9. Press CTRL-F to search, change the search mode to "Hex" and then search for "01 01 00 1B”. Note that the data just before this should read "3F 01 00 00", otherwise see 9a below.
10. Highlight and delete everything prior to "01 01 00 1B”
11. Go to line (offset) 130 and delete the last block and everything after. The data to be deleted should begin with "3F 01", otherwise see 11a below.
12. Save the file as "a.hex", which should be exactly 319 bytes


Alternative options:
1a. Use a very particular USB-Ethernet adapter per a thread on the other board titled "showthread.php?11728-Get-1B-file-from-Exx-CIC-WITHOUT-ICOM" In this case the address settings may be:
Static IP:160.48.199.98 Mask:255.255.255.128 Gateway/CIC IP:160.48.199.99
or: Static IP:10.250.89.1 Mask:255.255.0.0 Gateway/CIC IP:10.250.89.2
2a. Use tftp32 to turn your computer into the host and force the CIC to the IP address of your choosing. Set your PC to a static IP address (e.g. 192.168.10.10/255.255.255.0) Launch TFTD32 and bind it to your wired adapter. Under the options tab, set the start address to 192.168.10.11 with at least 2 for the pool size. Reboot your CIC by pressing the VOLUME button for about 30 seconds. The CIC will now be accessible at the address you specified, 192.168.10.11 in this case. See post #200 for more details.
4a. Use tftp32, WinSCP, or similar to make the FTP connection. You can check the "anonymous" box to login without a password. In this case the file will be called "data03" and located at “/mnt/hbdebug/”
9a. Sometimes the 1b file is not 319 bytes. The data that you cut in step 10 should end with "...01 3F 01 00 00" where "01 3F" is big endian hex for 319. If you have something different you need to translate it and cut the file accordingly. Note that most online hex-decimal converters expect little endian so to translate 01 3F, enter 3F01.
11a. Sometimes the download process inserts extra carriage returns (hex "0D") into the file and fsc.exe will give an error "Version after create () = 0xD1". It seems normal files have only one instance of "0D" near the end so try deleting any earlier instances until you get to 319 bytes. See more advanced detail in the bmw coding thread "get 1b file from Exx CIC without ICOM" starting at post #296.

Hi guys,

Unfortunately, non of these methods worked for me.

I'm not sure if it's something wrong with my car or PC configuration.

My car is E90 with CIC business navigation.

Since my windows tablet does not have a physical ethernet port, I'm using this adapter to connect the ENET cable to the tablet.

https://www.aliexpress.com/item/1005004088370544.html

However, it seems not connecting.

Is there anyone who got succeed by using one of these adapters? if please, please guide me on how to.

Resources I have for the task.

ENET Cable
DCAN Cable
Ethernet to Type C adapter
Windows 11 laptop/tablet
MacBook Air


Thanks and best regards,
Nuwan