[EvanTheBruce]

I have searched around and found two links for ISTA-D downloads. One wants $100 and its a 18 day wait for the transaction to clear, the other was corrupted from the host site and would not unzip.

Where did you guys get your ISTA-D software? I have no issue paying for it from Rheingold but if I can get it for free that's never a bad option either. Planning on doing my fuel injectors this weekend and need the software tools ASAP to register the injectors.

Thanks for your help as always guys!

[Owen81]

Take a look in the coding section. Lots of options.

[9mmkungfu]

I believe you can also register them with INPA as well.

[335D Alpha Pappa]

For those with the Schwaben scan tool:

http://www.e90post.com/forums/showpo...7&postcount=97

You have to read the other responses before and after this post. they explain how the injectors are registered. It is another reason why I got this tool.

[EvanTheBruce]

Originally Posted by 9mmkungfu

I believe you can also register them with INPA as well.

Can you register them in INPA? I have INPA loaded but have issues running the program on my car despite following all of the install instructions to a T.

[9mmkungfu]

Originally Posted by EvanTheBruce

Can you register them in INPA? I have INPA loaded but have issues running the program on my car despite following all of the install instructions to a T.

Yes I believe so. You may need certain files in order for it to work with the M57 though. I think I had to do something special for it to work properly. It's been a while and I can't recall exactly.

[ninja_zx11]

You can read this whole thread to make INPA to work on M57...