[dutch79]

Originally Posted by dutch79

The download is already 35Gb, so I wondered what the total size of the install (main partition A) will be in the end. For B and C it's adds another 2+2Gb.

Anybody?

[m_fife]

Originally Posted by Sensible_

Ah ok sorry. I'll send you the emulator one later tonight.

Much thanks!!!

[m_fife]

Ok so I've got the emulator downloaded... however I'm running into a problem as I am running VMWare Fusion 7 on a Mac vice Workstation.... any how-to on configuring Fusion?

[Sensible_]

Originally Posted by igotag

Ok so I've got the emulator downloaded... however I'm running into a problem as I am running VMWare Fusion 7 on a Mac vice Workstation.... any how-to on configuring Fusion?

Google the emulator manual. It's pdf format then download Uber Network Fuser. As fusion has no Virtual Network Editor, Fuser is a third party app that does the same thing. Just follow the pdf as best you can.

[m_fife]

Originally Posted by Sensible_

Google the emulator manual. It's pdf format then download Uber Network Fuser. As fusion has no Virtual Network Editor, Fuser is a third party app that does the same thing. Just follow the pdf as best you can.

Thanks!

[S1RC]

I was told with ISTA/P I can update my CIC software, would that be possible to do with the ICOM emulator?

My CIC software version is outdated and I need to update it before I can add 6NR BMW Apps.

[Sensible_]

Originally Posted by S1RC

I was told with ISTA/P I can update my CIC software, would that be possible to do with the ICOM emulator?

My CIC software version is outdated and I need to update it before I can add 6NR BMW Apps.

Re your PM I'll try and PM you a link tomorrow.

Never attempt CIC update or any MOST module for that matter with ICOM Emulator. I hear stories of the emulator bricking those modules due to lack of MOST connection.

I'm afraid only way for you is to buy an ICOM clone / original or ops unit.

[Teq]

Yep you need an icom a + b to update the cic. (can + most)

[CarAbuser]

Just looking at getting this installed on a VM. How large should I make my C drive?

I'm guessing it will need around 100GB.

[khurmit]

Hey buddy - that magnet link for the ICOM emulator doesn't work - could you send an alternative link?

[CarAbuser]

Originally Posted by Sensible_

How to run ISTAP native with K+DCAN interface using ICOM emulator

1. Disable firewall.
2. Remove voltage constant.
3. Extract and copy the ICOM emulator xml files to:

*:\apps\wsm\apps\agent\data\

Hi Sensible,

Could you tell me where I can find these xml files? I have a copy of the ICOM Emulator VM setup.

[khurmit]

Originally Posted by CarAbuser

Hi Sensible,

Could you tell me where I can find these xml files? I have a copy of the ICOM Emulator VM setup.

The link is in Sensible's original post.

https://drive.google.com/file/d/0B0h...ew?usp=sharing

[CarAbuser]

Yeh, see it now. I was looking for it in the torrent file!

EDIT:

For anyone wanting to set this up on a VM you will need to leave about 100GB. You could get away with 85GB~ but that would be cutting it very fine.

[khurmit]

Originally Posted by CarAbuser

Yeh, see it now. I was looking for it in the torrent file!

EDIT:

For anyone wanting to set this up on a VM you will need to leave about 100GB. You could get away with 85GB~ but that would be cutting it very fine.

Nice one - any chance you could share a link to the actual emulator?

[S1RC]

So I set this up on a BootCamp partition on my MBP and the ICOM emulator doesn't seem to get recognized in ISTA/P.

I couldn't get the link to the emulator you posted to work. I found another but maybe it's not the right one.

How do I go about diagnosing the emulator and ISTA/P?

[Dracon]

You guys should check out Beemerboy's ISTA/P loader V3.2.

It includes an ICOM Emulator built it for K+DCAN and ENET cables and doesn't require another VM to work. It's all integrated.

Also the ISPI Next versions of ISTA/P (3.xx) are a lot easier to install (no longer need to partition the drives all over the place).

[khurmit]

Originally Posted by Dracon

You guys should check out Beemerboy's ISTA/P loader V3.2.

It includes an ICOM Emulator built it for K+DCAN and ENET cables and doesn't require another VM to work. It's all integrated.

Also the ISPI Next versions of ISTA/P (3.xx) are a lot easier to install (no longer need to partition the drives all over the place).

OK so I tried the loader you mentioned - followed all install instructions but the loader won't start, which makes me think that it can't see I have ISTA/P installed (I've got the ISTA/P version posted at the top of this thread).

Do you have any links to threads containing the "ISPI Next versions of ISTA/P (3.xx)" & install instructions?

[Dracon]

Originally Posted by khurmit

OK so I tried the loader you mentioned - followed all install instructions but the loader won't start, which makes me think that it can't see I have ISTA/P installed (I've got the ISTA/P version posted at the top of this thread).

Do you have any links to threads containing the "ISPI Next versions of ISTA/P (3.xx)" & install instructions?

A Google search for ISTA/P 3.55 gives a number of links. Although I've attached a BitTorrent version to this post.

[khurmit]

Originally Posted by Dracon

A Google search for ISTA/P 3.55 gives a number of links. Although I've attached a BitTorrent version to this post.

Cheers buddy - no seeders for that torrent attached, but am actively hunting via google now!

[Dracon]

Originally Posted by khurmit

Cheers buddy - no seeders for that torrent attached, but am actively hunting via google now!

There's tons of seeders for that torrent, torrent is reporting 43 seeders.

[khurmit]

Originally Posted by Dracon

There's tons of seeders for that torrent, torrent is reporting 43 seeders.

Ur right - work firewall was blocking it. My bad!

[thaking]

Can I use this SW on WIN 7 x64 without any cable, just to check ž2workshop repair manuals" for my e90 LCI (same as it was inside of BMW TIS )?

Thanks