[Will_460cs]

Hi,

I have retrofitted The headlight washer system to my 2009 LCI 330i E91.

I am trying to construct a plan using NCS to code in S502A Headlight cleaning system.

I have a very limited understanding of NCS at present, I would appreciate allot any help on adding this option!

Thanks Will

[sdbmwcoding]

Go into JBBF module and enable Headlight Washers via NCS Dummy

[Will_460cs]

Originally Posted by sd*********

Go into JBBF module and enable Headlight Washers via NCS Dummy

Originally Posted by sd*********

Go into JBBF module and enable Headlight Washers via NCS Dummy

Thanks! I will have to get a copy of NCS dummy, I don't suppose there is a known reliable download?

[sdbmwcoding]

Originally Posted by Will_460cs

Thanks! I will have to get a copy of NCS dummy, I don't suppose there is a known reliable download?

Did you download Bimmergeeks download? If so go to Windows C > NCS Expert > NCS_Dummy

If not, look for SCHEINWERFERREININUNG in JBBF and set to nicht_aktiv

[Will_460cs]

Originally Posted by sd*********

Did you download Bimmergeeks download? If so go to Windows C > NCS Expert > NCS_Dummy

If not, look for SCHEINWERFERREININUNG in JBBF and set to nicht_aktiv

Originally Posted by sd*********

Did you download Bimmergeeks download? If so go to Windows C > NCS Expert > NCS_Dummy

If not, look for SCHEINWERFERREININUNG in JBBF and set to nicht_aktiv

Thanks, i want to turn them on - is this the only module/option I need to turn to aktiv?