Wheel fitment problem (advice needed)

cuban335i · 10-24-2010, 04:20 PM

Hey guys,
I might buy some Advan RS-D's from a fellow member and the wheels are 19x9 et22 front and 19x10 et20 rear with 255/35/19 front tires and 275/35/19 rear tires. Would these fit my e92 335i with only my rear fenders rolled? I don't want excessive rubbing when I drive.
Thanks,
Matt

also, what do you think of the switch from DPE S-15's (brushed face and chrome lip) to Advan RS-D's (silver color, not the black one)? will they look better or worse?

JoeyBananaz18 · 10-24-2010, 08:17 PM

Are those M-fitments? If so im pretty sure both front and rear need to be rolled. good luck with everything. im sure we can expect more pics of you sick car.

Express · 10-24-2010, 08:18 PM

you need WAYYY smaller tires in the front and rear

cuban335i · 10-24-2010, 10:45 PM

yea i was thinking that the tires were way too wide, esp up front.. I also think a 19x10 ET20 is a little too agressive as well

cuban335i · 10-24-2010, 10:46 PM

what do you guys think about a switch from my DPE s-15's to Advan RS-D's?

JhnR · 10-25-2010, 02:05 AM

you gotta loose those tires.

and with those offsets you need to roll your fenders.

so short answer. not really. def not bolt on.

kamek · 10-25-2010, 09:53 AM

What do you mean "only my rear fenders rolled?" You can only roll the rears...

With a +20 offset and 10 in. width, you'd have to run 235s in the rear with your fenders PULLED and some decent camber.

And IMO, Advans will look better than DPE's any day.

PandaBear · 10-25-2010, 10:30 AM

idk bro, i was looking at the RS-D on white as well cause I have the same car as you and I didn't really like it.

cuban335i · 10-25-2010, 10:37 AM

i guess it's going to be a no go then... I'm not trying to run 235's in the rear lol

Quote:

Originally Posted by PandaBear

idk bro, i was looking at the RS-D on white as well cause I have the same car as you and I didn't really like it.

Yea, I saw dustin@AEperformance's m3 with them and it looked kind of iffy... i think i like just the regular RS's better... I dunno, I kind of want to switch things up with my wheels, but I might just end up buying new lips for all four, maybe in a carbon fiber finish.. which would look really nice..

PandaBear · 10-25-2010, 12:19 PM

BBS?

Express · 10-25-2010, 12:20 PM

you could just buy my setup..... =D with proper tires

cuban335i · 10-25-2010, 02:02 PM

Quote:

Originally Posted by PandaBear

BBS?

Yea ideally a set of real LM's.. That would be nice, but I dont have the money to just buy another set of wheels that'd be 5k without trading mine plus cash or selling mine first.
I'd actually like to get a set of Volk TE 37 SL's (something a little more functional than LM's). But I would need to pick up a set of winter wheels and tires before I can sell mine and buy something new.. Lol unless I want to put my car on jackstands for a week or 2 (which I don't)

Quote:

Originally Posted by express705

you could just buy my setup..... =D with proper tires

Lol no thanks bro... If I switch it'll either be Volks, Advans, BBS, or HRE..

10-24-2010, 04:20 PM	#1
cuban335i Brigadier General 229 Rep 3,550 Posts Drives: 535i xdrive Join Date: Feb 2009 Location: central NJ iTrader: (18)	Wheel fitment problem (advice needed) Hey guys, I might buy some Advan RS-D's from a fellow member and the wheels are 19x9 et22 front and 19x10 et20 rear with 255/35/19 front tires and 275/35/19 rear tires. Would these fit my e92 335i with only my rear fenders rolled? I don't want excessive rubbing when I drive. Thanks, Matt also, what do you think of the switch from DPE S-15's (brushed face and chrome lip) to Advan RS-D's (silver color, not the black one)? will they look better or worse? __________________ Current: '13 F10 535i xDrive - lightly modded for now Previous: '12 e92 M3 Melbourne Red/Bamboo - ADV.1 ADV10, Volk TE37SL, OSS, Innotech F1, Arkym, iND '09 e92 335i Alpine White/Saddle Brown - fully modded
	Appreciate 0 Tweet Quote

10-24-2010, 08:17 PM	#2
JoeyBananaz18 Brigadier General 398 Rep 4,084 Posts Drives: metrocard Join Date: May 2009 Location: Whitestone, NY iTrader: (3)	Are those M-fitments? If so im pretty sure both front and rear need to be rolled. good luck with everything. im sure we can expect more pics of you sick car. __________________ 7/18/09- I pick up my baby- 2009 E92 335i Xdrive, Space Gray over Coral Red. Premium Pkg, Cold Weather Pkg, M-Sport Pkg, 193Ms, Gloss Black grills, Custom Gloss Black Mirrors, Performance shift and E-brake boot, M3 spoiler, Euro fog switch, gloss black interior tim, Coco-Mats (red/black), H&R coilovers, 19'' Alufelgen SF-71s......
	Appreciate 0 Quote

10-24-2010, 08:18 PM	#3
Express Major General 369 Rep 8,693 Posts Drives: 06 330i Join Date: Dec 2008 Location: The Promise Land iTrader: (17) Garage List 2006 BMW 330i [8.30]	you need WAYYY smaller tires in the front and rear
	Appreciate 0 Quote

10-24-2010, 10:45 PM	#4
cuban335i Brigadier General 229 Rep 3,550 Posts Drives: 535i xdrive Join Date: Feb 2009 Location: central NJ iTrader: (18)	yea i was thinking that the tires were way too wide, esp up front.. I also think a 19x10 ET20 is a little too agressive as well __________________ Current: '13 F10 535i xDrive - lightly modded for now Previous: '12 e92 M3 Melbourne Red/Bamboo - ADV.1 ADV10, Volk TE37SL, OSS, Innotech F1, Arkym, iND '09 e92 335i Alpine White/Saddle Brown - fully modded
	Appreciate 0 Quote

10-24-2010, 10:46 PM	#5
cuban335i Brigadier General 229 Rep 3,550 Posts Drives: 535i xdrive Join Date: Feb 2009 Location: central NJ iTrader: (18)	what do you guys think about a switch from my DPE s-15's to Advan RS-D's? __________________ Current: '13 F10 535i xDrive - lightly modded for now Previous: '12 e92 M3 Melbourne Red/Bamboo - ADV.1 ADV10, Volk TE37SL, OSS, Innotech F1, Arkym, iND '09 e92 335i Alpine White/Saddle Brown - fully modded
	Appreciate 0 Quote

10-25-2010, 02:05 AM	#6
JhnR Laker Land 16 Rep 802 Posts Drives: E90 335 Join Date: Dec 2007 Location: SoCaL//Van Nuys iTrader: (5)	you gotta loose those tires. and with those offsets you need to roll your fenders. so short answer. not really. def not bolt on. __________________
	Appreciate 0 Quote

10-25-2010, 09:53 AM	#7
kamek Brigadier General 358 Rep 3,447 Posts Drives: 2018 X3 M40i Join Date: Mar 2008 Location: Queens, NY iTrader: (4) Garage List 2008 BMW 328xi [8.20]	What do you mean "only my rear fenders rolled?" You can only roll the rears... With a +20 offset and 10 in. width, you'd have to run 235s in the rear with your fenders PULLED and some decent camber. And IMO, Advans will look better than DPE's any day.
	Appreciate 0 Quote

10-25-2010, 10:30 AM	#8
PandaBear Banned 184 Rep 7,269 Posts Drives: 2009 335i X-Drive Join Date: Sep 2009 Location: Long Island, New York iTrader: (1) Garage List 2009 335i X-Drive [0.00] 2007 328xi [0.00]	idk bro, i was looking at the RS-D on white as well cause I have the same car as you and I didn't really like it.
	Appreciate 0 Quote

10-25-2010, 12:19 PM	#10
PandaBear Banned 184 Rep 7,269 Posts Drives: 2009 335i X-Drive Join Date: Sep 2009 Location: Long Island, New York iTrader: (1) Garage List 2009 335i X-Drive [0.00] 2007 328xi [0.00]	BBS?
	Appreciate 0 Quote

10-25-2010, 12:20 PM	#11
Express Major General 369 Rep 8,693 Posts Drives: 06 330i Join Date: Dec 2008 Location: The Promise Land iTrader: (17) Garage List 2006 BMW 330i [8.30]	you could just buy my setup..... =D with proper tires
	Appreciate 0 Quote