[harms]

Originally Posted by CashedUpBogan

...I can't wait to run the E60 map and chuck her on the dyno!

...could you please have a look and check them out?

Logs look really clean, you could go way more timing with that fuel. Check again when you've got just 98 in the tank.


You're missing LPFP and AFR2 in the parameters, but i'm sure they are fine.

And man those RB's hold boost up top, much much want!

You're gonna love Ken's E60 flash. With those RB's it'll rip your face off

[ATTN]

E60 with no LPFP? whoooah!!

[CashedUpBogan]

Originally Posted by ATTN

E60 with no LPFP? whoooah!!

Yeah man. I have a quadruple triple silicone barrel HPFP by RBVTTMMP Tooning so don't need a LPFP. Ain't nobody got time fo dat.

[Aus335iguy]

Hey all,
I just got a 2009 335 msport and I'm stoked with the car. It's an awesome ride and I love it but I feel like its not even trying . I lurked here for a while and decided to bite the bullet. I bought an acer tablet, a cable and the MHD app. Problem is the cable that I bought doesn't work with Android
I bought this one. http://www.ebay.com.au/itm/INPA-Edia...-/221418264572
Anyone know where I can get one that's known to work with Android ?

The car is stock and I'm looking for a cooler but don't want to pay 1200 bucks when I know that a decent one costs 450 in the states... Any advice? Or am I being too much of a tight arse?
The VRSF ones look good for the money

[naynay]

did you get the OTG adapter?

[Socket]

Originally Posted by Aus335iguy

Hey all,
I just got a 2009 335 msport and I'm stoked with the car. It's an awesome ride and I love it but I feel like its not even trying . I lurked here for a while and decided to bite the bullet. I bought an acer tablet, a cable and the MHD app. Problem is the cable that I bought doesn't work with Android
I bought this one. http://www.ebay.com.au/itm/INPA-Edia...-/221418264572
Anyone know where I can get one that's known to work with Android ?

The car is stock and I'm looking for a cooler but don't want to pay 1200 bucks when I know that a decent one costs 450 in the states... Any advice? Or am I being too much of a tight arse?
The VRSF ones look good for the money

Cables are a bit hit and miss return it and try another one😃
Vrsf are a quality fmic and great value for money

[zaz96]

Just had VRSF catless downpipes and DCIs fitted to my car 2 days ago and today I flashed the car with the stage 2 maps from MHD flasher.

The tune seems to be running great for me, big power gains and very responsive. Running it on the dyno tomorrow morning.

Having another issue with the car however, ever since installing the downpipes I've been getting a lot of oil smoke from the exhaust when coming to a stop at the lights. I've made a separate detailed thread for this here: http://www.e90post.com/forums/showthread.php?t=1156020

Would be great if anyone can shed some light on the issue and I'll post dyno results tomorrow.

[Aus335iguy]

Got another cable and it's working. Getting a charger and I'll be flashing on the weekend.
Anything else I should consider ?

[zaz96]

Originally Posted by Aus335iguy

Got another cable and it's working. Getting a charger and I'll be flashing on the weekend.
Anything else I should consider ?

Make sure the battery charger is at least 5A, anything less probably won't be enough.

I went to a local garage and they were happy to let me use theirs out the front of their shop, no charge

[Socket]

Originally Posted by zaz96

Just had VRSF catless downpipes and DCIs fitted to my car 2 days ago and today I flashed the car with the stage 2 maps from MHD flasher.

The tune seems to be running great for me, big power gains and very responsive. Running it on the dyno tomorrow morning.

Having another issue with the car however, ever since installing the downpipes I've been getting a lot of oil smoke from the exhaust when coming to a stop at the lights. I've made a separate detailed thread for this here: http://www.e90post.com/forums/showthread.php?t=1156020

Would be great if anyone can shed some light on the issue and I'll post dyno results tomorrow.

Extra soot from tail pipes after DPs is normal
The cats use to "filter" it out and so was not as obvious
No idea why you might be getting lots of oil smoke

[Brule]

Originally Posted by Aus335iguy

Hey all,
I just got a 2009 335 msport and I'm stoked with the car. It's an awesome ride and I love it but I feel like its not even trying . I lurked here for a while and decided to bite the bullet. I bought an acer tablet, a cable and the MHD app. Problem is the cable that I bought doesn't work with Android
I bought this one. http://www.ebay.com.au/itm/INPA-Edia...-/221418264572
Anyone know where I can get one that's known to work with Android ?

The car is stock and I'm looking for a cooler but don't want to pay 1200 bucks when I know that a decent one costs 450 in the states... Any advice? Or am I being too much of a tight arse?
The VRSF ones look good for the money

VRSF 7 inch intercooler soaks up a fair bit of heat.
I have looked at numerous vrsf 7 inch logs and it works well.

It is cheap and good I wouldn't hesitate in buying it over $1000+ intercooler.

[Brule]

Originally Posted by Aus335iguy

Got another cable and it's working. Getting a charger and I'll be flashing on the weekend.
Anything else I should consider ?

Pull the Low pressure fuel pump fuse in/behind the glove box.

Pull it out when you flash, it takes about 40 minutes depending on type of car ecu.

Keep a charger on it too.

[Aus335iguy]

Thanks guys I've got a 3A charger will that be ok if I pull the lpfp fuse ?
I might keep the thing on float charge overnight as well.

I've read that sometimes the plugs need changing after a flash?

[Scotty89]

The plugs might need changing, not because of the flash, but simply because they need to be in tip top condition when the boost+fueling is more aggressive you need a good strong reliable spark.

Also, don't flash at 7.00am in the morning before you're about to go to work. Only Socket does that.

[Socket]

Originally Posted by Scotty89

The plugs might need changing, not because of the flash, but simply because they need to be in tip top condition when the boost+fueling is more aggressive you need a good strong reliable spark.

Also, don't flash at 7.00am in the morning before you're about to go to work. Only Socket does that.

hahhaa only when recovering my car from a bricked ECU because of a newly installed boost sensor

[bmwheath]

Originally Posted by CashedUpBogan

Yeah man. I have a quadruple triple silicone barrel HPFP by RBVTTMMP Tooning so don't need a LPFP. Ain't nobody got time fo dat.

Bahahahaha

[KiwiRD]

Hey guys. Probably a silly question, but when it comes to buying a cheap tablet that supports OTG for loading the MHD flash, are there any memory requirements as the tablet is storing your car's stock ECU settings? Or am I way off here?

[DR-JEKL]

Originally Posted by KiwiRD

Hey guys. Probably a silly question, but when it comes to buying a cheap tablet that supports OTG for loading the MHD flash, are there any memory requirements as the tablet is storing your car's stock ECU settings? Or am I way off here?

Havent done it myself, but all portable devices have expandable SD cards???

so no that shouldnt be an issue, or are you talking about RAM?

[KiwiRD]

Originally Posted by DR-JEKL

Havent done it myself, but all portable devices have expandable SD cards???

so no that shouldnt be an issue, or are you talking about RAM?

I'm more thinking about the file size of the factory ECU map and whether the tablet/phone or whatever is used to flash the ECU has enough memory to store it. I have practically zero technology experience so that whole sentence may make no sense at all.

[JB4-335]

Factory bin is 2mb IIRC

[Socket]

Scotty and I brought $75 Anroid tablets. They are super crap but have enough memory to store the ECU backup. If these have enough memory anything will

[DR-JEKL]

Originally Posted by KiwiRD

I'm more thinking about the file size of the factory ECU map and whether the tablet/phone or whatever is used to flash the ECU has enough memory to store it. I have practically zero technology experience so that whole sentence may make no sense at all.

haha the short answer is yes it will