[Drsauce10]

Hey is there anybody out there who codes , my service engine soon light is on and want go away I just need it gone

[hassmaschine]

This isn't something you can do with coding. it has to be done with flash tuning. Or, actually fix the problem and clear the errors..

[Drsauce10]

Originally Posted by hassmaschine

This isn't something you can do with coding. it has to be done with flash tuning. Or, actually fix the problem and clear the errors..

I seen somewhere we're you can get it removed through coding?

[hassmaschine]

You can't. You have to flash different data to the DME that erases the codes. Coding and flash tuning are completely different things. Coding just lets you select pre-determined options in a module, but on the DME you can't code it after 10 hours of run time and the coding options are limited to a few things anyway.

[IllSic_Design]

S.E.S. mean you have a fault with the engine/emissions systems and you should probably get it fixed and not just get rid of the light(not possible anyways), unless you are talking about having a code for catless downpipes which can be flashed out.

[Drsauce10]

Originally Posted by IllSic_Design

S.E.S. mean you have a fault with the engine/emissions systems and you should probably get it fixed and not just get rid of the light(not possible anyways), unless you are talking about having a code for catless downpipes which can be flashed out.

I'm about to get some careless dp installed can anybody code my car for the light not to come on and get an emissions error ?

[IllSic_Design]

Originally Posted by Drsauce10

I'm about to get some careless dp installed can anybody code my car for the light not to come on and get an emissions error ?

This is not something to do with coding. As stated above coding and flashing accomplish two different things. After catless downpipes you would need a flash tune to get rid of 02 sensor codes.

[Drsauce10]

Originally Posted by IllSic_Design

This is not something to do with coding. As stated above coding and flashing accomplish two different things. After catless downpipes you would need a flash tune to get rid of 02 sensor codes.

How much does it cost to get a flash tune for that

[IllSic_Design]

MHD, which is a flash tuning app for your phone, costs about $200 or so all said and done, maybe a little cheaper. There's also JB4($450+) which is a piggback, but I think their newest revision of software doesn't get rid of o2 sensor codes because of fed regulations.

[dpaul]

Respectfully DrSauce, you're missing the point.

You want to know why the CEL is on in the first place. Then you can decide whether you have a problem that can be safely ignored. If so, at that point you can worry about software fixes to suppress the light

[lucasmiller2015]

Originally Posted by dpaul

Respectfully DrSauce, you're missing the point.

You want to know why the CEL is on in the first place. Then you can decide whether you have a problem that can be safely ignored. If so, at that point you can worry about software fixes to suppress the light

^this. With the exception of catless downpipes, the service engine soon light does actually mean something and it's important that you find out why it's on, since there could be a legitimate issue with your engine that needs to be fixed. It's not just there for no reason.

Also, there's no way to disable the light entirely (short of a piece of tape over it), you have to find out what code is present that is causing it and either fix the issue or disable the fault (i.e. 3106 for catless downpipes).

If you have/can get a K+DCAN cable, an OTG adapter, and an Android phone/tablet, you can use the MHD app to read codes without buying any licenses.