|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
FS: DSX spacers
|
|
01-30-2019, 06:11 AM | #6 |
Lieutenant Colonel
654
Rep 1,893
Posts |
In theory, you need bolts that are 12mm longer than stock. Since stock is 26-28mm, you need bolts that are 38-40mm long.
Here's a set of 20 bolts on Amazon for $23 delivered https://www.amazon.com/dp/B00PJIYLX0...d_i=B00PJIYLX0 |
Appreciate
0
|
01-30-2019, 09:27 AM | #7 | |
Private
2
Rep 53
Posts |
Quote:
So they are 12 mm and the stock is 26-28 mm, so i need 38-40 mm as you said. Have you had them installed before? Can you share with me some pictures because i need to see how will they look. I have been reading about this for the first time, are they hubcentric spacers? |
|
Appreciate
0
|
01-30-2019, 09:58 AM | #8 |
Lieutenant Colonel
654
Rep 1,893
Posts |
I've used them but am not currently using them. They are hubcentric - as you can see by the lip that protrudes from the face.
I have no pictures of my vehicle with them installed but you can probably get a reasonable idea of how it will look by searching the forum for pictures. Remember that you cannot compare to a different wheel unless the offset of that wheel is the same as the ones you've got on your car. But 12mm is not going to make a radical change in the way things look - it will be subtle. There is very little likelihood of a problem with rubbing or other clearance issue when used with stock wheel/tire sizes |
Appreciate
0
|
Bookmarks |
|
|