Evolve 335d Tune Interest.

Taz@Evolve. P · 02-06-2012, 02:23 PM

Quote:

Originally Posted by coolchu001

I'm happy with the JBD's power, but this tune will probably have a different power band. I also like the convenience of not having to remove anything when going into the dealer.

Let's say if the dealer upgrades the ECU's software will the tune be removed? Also does this remove the rev limiter or the speed limiter?

If the dealer upgrades the ECU's software the tune would get overwritten yes, the tune would have to be written in again.

Speed limiter we can remove, no point in adjusting the rev limit at the moment (though we of course can)

cssnms · 02-06-2012, 02:45 PM

Quote:

Originally Posted by Paul@Evolve

If the dealer upgrades the ECU's software the tune would get overwritten yes, the tune would have to be written in again.
Speed limiter we can remove, no point in adjusting the rev limit at the moment (though we of course can)

And would this entail having to buy a new tune from Evolve?

Taz@Evolve. P · 02-06-2012, 02:47 PM

Quote:

Originally Posted by cssnms

And would this entail having to buy a new tune from Evolve?

No no, all retunes are supplied free of charge.

DieselDiner · 02-06-2012, 03:12 PM

Paul, could you give the collective "us" an idea of the process of removing the ecu and shipping it? Do you have a tutorial somewhere on your website?

Taz@Evolve. P · 02-06-2012, 03:33 PM

Quote:

Originally Posted by DieselDiner

Paul, could you give the collective "us" an idea of the process of removing the ecu and shipping it? Do you have a tutorial somewhere on your website?

Not as of yet though we will do after the next one is done and can talk anyone through it.

GreekboyD · 02-06-2012, 05:19 PM

Quote:

Originally Posted by Concentric190

they used to be just down the road from my work but they moved. still only 30min away

You're so lucky being that close man! Keep us posted for sure!

coolchu001 · 02-06-2012, 10:59 PM

Thanks for the responses Paul. Might have to pay VS motorsports another visit

VSmotorsports · 02-07-2012, 09:56 AM

Quote:

Originally Posted by DieselDiner

Paul, could you give the collective "us" an idea of the process of removing the ecu and shipping it? Do you have a tutorial somewhere on your website?

On Monday we will take some pictures and do a small write up on how to remove the DME for people who are not local and can't have us do it.

Quote:

Originally Posted by coolchu001

Thanks for the responses Paul. Might have to pay VS motorsports another visit

More of a reason now to come check out our new shop.

flipm3 · 02-07-2012, 09:57 AM

Quote:

Originally Posted by VSmotorsports

On Monday we will take some pictures and do a small write up on how to remove the DME for people who are not local and can't have us do it.

By far one of the coolest things you've showed me at the shop! It's pretty cool how precise and accurate everything was designed!

crazyinp · 02-07-2012, 10:48 AM

I still would like to see some dyno plots. I guess I have to wait till Concentric190 post his

Taz@Evolve. P · 02-07-2012, 11:18 AM

Quote:

Originally Posted by crazyinp

I still would like to see some dyno plots. I guess I have to wait till Concentric190 post his

There is a few out there already

From BMW Car: http://issuu.com/evolveautomotive/docs/evolve335d

Another BMW Car, 335i vs 335d: http://issuu.com/evolveautomotive/docs/fuel_for_thought

on the UK site:

Few dyno graphs in here: http://www.e90post.com/forums/showth...ht=evolve+335d

Little review here: http://www.e90post.com/forums/showth...ht=evolve+335d

Another: http://www.e90post.com/forums/showth...ht=evolve+335d

DieselDiner · 02-08-2012, 05:14 PM

Quote:

Originally Posted by Concentric190

Baseline Dyno is scheduled on friday the 10th, and setup to get tune done @ VS the following week

2 days to go (for the baseline)!

crazyinp · 02-08-2012, 08:56 PM

Quote:

Originally Posted by DieselDiner

2 days to go (for the baseline)!

Concentric190 · 02-09-2012, 05:24 PM

yeah, should be interesting, tomorrow around that time we should be having a nice snowfall too lol.

scott135i · 02-09-2012, 06:50 PM

Quote:

Originally Posted by Paul@Evolve

Quote:

Originally Posted by DieselDiner

Paul, could you give the collective "us" an idea of the process of removing the ecu and shipping it? Do you have a tutorial somewhere on your website?

Not as of yet though we will do after the next one is done and can talk anyone through it.

Isn't it 99% the same as removing it from the n54 platform? Or is the location different? Can't imagine it is.

DieselDiner · 02-09-2012, 06:51 PM

Quote:

Originally Posted by Concentric190

yeah, should be interesting, tomorrow around that time we should be having a nice snowfall too lol.

Murphy's Law!

scott135i · 02-09-2012, 07:04 PM

Quote:

Originally Posted by rakimb17

Nice,
But i'm not sure how I feel about dealer visits with a tune.
Maybe I'll go look for a spare ecu

Anyone have a part # / price?

crazyinp · 02-10-2012, 03:44 PM

Any updates...

Concentric190 · 02-11-2012, 09:36 AM

Went to a-spec yesterday but we couldn't find a rpm signal to go off of. I really wanted to see the TQ numbers from this tune (can't get that without rpm signal) so I chose not to do it and find a dyno that could pick it up or figure out a way to get the signal.

flipm3 · 02-11-2012, 09:46 AM

Quote:

Originally Posted by Concentric190

Went to a-spec yesterday but we couldn't find a rpm signal to go off of. I really wanted to see the TQ numbers from this tune (can't get that without rpm signal) so I chose not to do it and find a dyno that could pick it up or figure out a way to get the signal.

Sorry it didn't workout. If you don't mind driving out to St. Charles, I highly recommend taking it to Dean's Performance.

He's dyno'd a ton of E46 M3s from ChiTownM and an E90 M3 for VS Motorsports.

You should be able to tap into the RPM reading from the DME. If I have time, I can try to take a pic of which wire it is. I'm pretty sure it's black or purple though

Concentric190 · 02-11-2012, 11:16 AM

I think I'm going to try going to performance autowerks since I've dynod my M3 there. I want to go today but not sure if they're open :-/

Concentric190 · 02-13-2012, 10:52 AM

Alright, scheduled dyno for this Thursday at Performance Autowerks, They have a mustang dyno.

02-06-2012, 03:12 PM	#92
DieselDiner Lieutenant Colonel 486 Rep 1,614 Posts Drives: 335d Join Date: Aug 2010 Location: Home iTrader: (2)	Paul, could you give the collective "us" an idea of the process of removing the ecu and shipping it? Do you have a tutorial somewhere on your website? __________________
	Appreciate 0 Quote

02-06-2012, 10:59 PM	#95
coolchu001 Lieutenant 47 Rep 583 Posts Drives: 09 BMW 335d Join Date: Aug 2009 Location: OH iTrader: (30)	Thanks for the responses Paul. Might have to pay VS motorsports another visit __________________
	Appreciate 0 Quote

02-07-2012, 10:48 AM	#98
crazyinp Major 296 Rep 1,245 Posts Drives: BMW Join Date: Jul 2011 Location: Bay Area iTrader: (5) Garage List 2022 BMW X5e [0.00] 2023 BMW X5M [0.00]	I still would like to see some dyno plots. I guess I have to wait till Concentric190 post his
	Appreciate 0 Quote

02-09-2012, 05:24 PM	#102
Concentric190 Second Lieutenant 7 Rep 264 Posts Drives: 335d Join Date: Mar 2011 Location: Willowbrook, IL iTrader: (0) Garage List 1997 BMW M3 [0.00] 2009 BMW 335d [0.00] 1995 BMW M3 [0.00]	yeah, should be interesting, tomorrow around that time we should be having a nice snowfall too lol. __________________ ///Andres 09 335d evolve tuned - 327whp / 490wtq -- 13.0@105 95 M3 Turbo - Built 3.0l s52, PTE74GTQ, AEM EMS & CDI 97 M3 NASA TTB build for 2014!
	Appreciate 0 Quote

02-10-2012, 03:44 PM	#106
crazyinp Major 296 Rep 1,245 Posts Drives: BMW Join Date: Jul 2011 Location: Bay Area iTrader: (5) Garage List 2022 BMW X5e [0.00] 2023 BMW X5M [0.00]	Any updates...
	Appreciate 0 Quote

02-11-2012, 09:36 AM	#107
Concentric190 Second Lieutenant 7 Rep 264 Posts Drives: 335d Join Date: Mar 2011 Location: Willowbrook, IL iTrader: (0) Garage List 1997 BMW M3 [0.00] 2009 BMW 335d [0.00] 1995 BMW M3 [0.00]	Went to a-spec yesterday but we couldn't find a rpm signal to go off of. I really wanted to see the TQ numbers from this tune (can't get that without rpm signal) so I chose not to do it and find a dyno that could pick it up or figure out a way to get the signal. __________________ ///Andres 09 335d evolve tuned - 327whp / 490wtq -- 13.0@105 95 M3 Turbo - Built 3.0l s52, PTE74GTQ, AEM EMS & CDI 97 M3 NASA TTB build for 2014!
	Appreciate 0 Quote

02-11-2012, 11:16 AM	#109
Concentric190 Second Lieutenant 7 Rep 264 Posts Drives: 335d Join Date: Mar 2011 Location: Willowbrook, IL iTrader: (0) Garage List 1997 BMW M3 [0.00] 2009 BMW 335d [0.00] 1995 BMW M3 [0.00]	I think I'm going to try going to performance autowerks since I've dynod my M3 there. I want to go today but not sure if they're open :-/ __________________ ///Andres 09 335d evolve tuned - 327whp / 490wtq -- 13.0@105 95 M3 Turbo - Built 3.0l s52, PTE74GTQ, AEM EMS & CDI 97 M3 NASA TTB build for 2014!
	Appreciate 0 Quote

02-13-2012, 10:52 AM	#110
Concentric190 Second Lieutenant 7 Rep 264 Posts Drives: 335d Join Date: Mar 2011 Location: Willowbrook, IL iTrader: (0) Garage List 1997 BMW M3 [0.00] 2009 BMW 335d [0.00] 1995 BMW M3 [0.00]	Alright, scheduled dyno for this Thursday at Performance Autowerks, They have a mustang dyno. __________________ ///Andres 09 335d evolve tuned - 327whp / 490wtq -- 13.0@105 95 M3 Turbo - Built 3.0l s52, PTE74GTQ, AEM EMS & CDI 97 M3 NASA TTB build for 2014! Last edited by Concentric190; 02-14-2012 at 08:04 AM..
	Appreciate 0 Quote