[WhatDoIPutHere]

BIMMERPOST / Classifieds

Asking Price:

None

Item Interest

Hello all, I'm looking to purchase an aftermarket oil cooler. Also, I'm open to any ideas to keeping oil temps down by more air flow to the stock cooler (If that's possible or actually works).

[LoneWolfPistol]

Try here ---> https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

Don't use the black adaptor or the blue screw fittings. Also order two mishmoto AN Fittings to install on the top part of the oil cooler housing (two hex screws)

SN: Might have to shave down the inside of the hood half a inch over the AN fittings due to rubbing. That worked for me and now im sitting at 205 degress daily

[WhatDoIPutHere]

Originally Posted by Simplev33

Try here ---> https://www.amazon.com/gp/product/B0...UTF8&psc=1

How long have you been using it for? I’m always a bit leery of amazon/eBay parts. Any oil leaks? Also, does it replace the stock one, or do you use both?

How long have you been using it for? I'm always a bit leery when it comes to amazon/eBay parts. Did you run this as an addition to your stock cooler, or replace it?

[LoneWolfPistol]

Originally Posted by WhatDoIPutHere

How long have you been using it for? I'm always a bit leery when it comes to amazon/eBay parts. Did you run this as an addition to your stock cooler, or replace it?

ive been using it for 5months. Yeah people are always worried about using non-bmw parts but the fact is that bmw isn't the cheapest and there are a lot of company's out there that can produce good quality for less cost.

And I ran them together, So yes Im running dual oil coolers

[WhatDoIPutHere]

Originally Posted by Simplev33

ive been using it for 5months. Yeah people are always worried about using non-bmw parts but the fact is that bmw isn't the cheapest and there are a lot of company's out there that can produce good quality for less cost.

And I ran them together, So yes Im running dual oil coolers

I see, is this the fitting?


Also, are you familiar with derale oil coolers or summit racing? Someone is selling one and I'm unsure of the brands. I've done some research, but can't find out much whether they're built to last.

[Willortiz]

Go on fb and go to the 335i or n54 group and hit up jake ulch he sells single and dual oil cooler setups

[hunterl41]

This Dinan one is on eBay. Pretty good deal.

https://www.ebay.com/itm/Engine-Oil-...53.m1438.l2649

[WhatDoIPutHere]

Originally Posted by hunterl41

This Dinan one is on eBay. Pretty good deal.

https://www.ebay.com/itm/Engine-Oil-...53.m1438.l2649

Oooh that is tempting. I see all these cheap amazon/eBay coolers, but I feel like they're prone to leak.

[WhatDoIPutHere]

Originally Posted by Willortiz

Go on fb and go to the 335i or n54 group and hit up jake ulch he sells single and dual oil cooler setups

I'll send him a message, thank you!

[LoneWolfPistol]

No the AN fittings im talking about look like this---> https://www.mishimoto.com/banjo-fitt...SABEgKqS_D_BwE

Good luck bro, I hope my dual setup works for you aswell sorry for the delay