Stoptech SS Lines

Skylinemotorsports · 10-14-2018, 10:04 PM

I have an e92 and am in the process of doing pads/rotors/lines/brake and abs sensors.

The mid and rear SS lines I had zero issues installing. Bleeding went fine, good to go. The front lines, not so much. I tried until my fingers where rawr trying to get the front passenger side line to thread into the cars brake line with zero luck. I had to put the old lines back so I can try again in afew days once my fingers have recovered.... The old lines threaded back with no issues, so I know I have no cross threaded anything...

Has anyone else had issues with the Stoptech brake lines? Are maybe the e90 and e92 different in size?

e92_bryan · 10-15-2018, 03:10 AM

Nope and I used the same kit
If anything the mids were the hatdest to get it

Skylinemotorsports · 10-18-2018, 11:49 AM

So the front driver side when on no issues. I think I have issues with that bolt on the passenger side. The old one will thread with no issues, but on the passenger side I cannot get the brake line threaded....

Anyone have any suggestions?

10-14-2018, 10:04 PM	#1
Skylinemotorsports Private 6 Rep 76 Posts Drives: 09 e92 335 Join Date: Apr 2017 Location: Atlanta iTrader: (0)	Stoptech SS Lines I have an e92 and am in the process of doing pads/rotors/lines/brake and abs sensors. The mid and rear SS lines I had zero issues installing. Bleeding went fine, good to go. The front lines, not so much. I tried until my fingers where rawr trying to get the front passenger side line to thread into the cars brake line with zero luck. I had to put the old lines back so I can try again in afew days once my fingers have recovered.... The old lines threaded back with no issues, so I know I have no cross threaded anything... Has anyone else had issues with the Stoptech brake lines? Are maybe the e90 and e92 different in size?
	Appreciate 0 Tweet Quote

10-15-2018, 03:10 AM	#2
e92_bryan First Lieutenant 127 Rep 345 Posts Drives: ‘11 e92 328 Join Date: Aug 2013 Location: So cal iTrader: (0)	Nope and I used the same kit If anything the mids were the hatdest to get it
	Appreciate 0 Quote

10-18-2018, 11:49 AM	#3
Skylinemotorsports Private 6 Rep 76 Posts Drives: 09 e92 335 Join Date: Apr 2017 Location: Atlanta iTrader: (0)	So the front driver side when on no issues. I think I have issues with that bolt on the passenger side. The old one will thread with no issues, but on the passenger side I cannot get the brake line threaded.... Anyone have any suggestions?
	Appreciate 0 Quote