[MrSweet1991]

Originally Posted by Gedas8640

When ever I'm trying to clear error memory with ISTA D I'm getting the following error: "Switch off the ignition and remove the ignition key with remote control from the key slot (if present)" and nothing changes when im removing key as well as there is only cancel option on the error window.

That's why I said to go to page 10 where the install instructions are for the

"NodeEdiabasVoltageControl"

The Mega link contains that software and once you install that you will be able to run the software and manually change the voltages of ignition so ISTA thinks you've turned the ignition on and off.

[grinsekatze]

Hi J0K3R5,

Any chance you could re-publish Road Maps MIDDLE EAST EVO 2020-2 on mega.nz?
I would really appreciate it.

Many thanks!

[J0K3R5]

Originally Posted by grinsekatze

Hi J0K3R5,

Any chance you could re-publish Road Maps MIDDLE EAST EVO 2020-2 on mega.nz?
I would really appreciate it.

Many thanks!

Had to delete files for space.
Need to check if I backed it up

[thesugarat]

J0K3R5, big thanks for consolidating all this. I'm thinking of installing the Standalone ISTA-P 3.67.1.006 version you have available, but there aren't any install instructions available. Did I miss something?

Edit: Nevermind... I figured it out.

[Wozza77]

Originally Posted by MrSweet1991

That's why I said to go to page 10 where the install instructions are for the

"NodeEdiabasVoltageControl"

The Mega link contains that software and once you install that you will be able to run the software and manually change the voltages of ignition so ISTA thinks you've turned the ignition on and off.

Following the instructions but the file "AllowFakeISTAOperation.reg" Seems to be missing.

[J0K3R5]

Originally Posted by Wozza77

Following the instructions but the file "AllowFakeISTAOperation.reg" Seems to be missing.

[gjm120]

I have ISTA-D version 4.01.21 (Bimmergeeks version).

Am I missing anything by not having one of the later versions? Car is a 2013 E82.

TIA

[Shay1128]

Originally Posted by J0K3R5

Hi,

I need you help with maps: Road Map North America EVO

Could you help with download links to the same?

[AUDELA]

Originally Posted by J0K3R5

https://mega.nz/folder/wlpHiI4a#f54pFHrRuYfA164xrSTlPA

J0k3R5 — thanks so much for this. Amazing. Just to verify the latest version of ISTA you have up is 4.27.12 right? EDIT: Never mind — I went back to OP and found link with v4.27.22 Sedoy Standalone version. Assume this is latest.

I've got an E93 325i with N53 engine and just installed the Bimmergeeks Standard Tools - need ISTA+ to do a Nox Cat replace function and delete adaptations as my Indy failed to do so after replacing nox sensor.

[allex29]

Hey, wanting to let you guys know you can use Carly with standard k+dcan cable. All the best to Joker and everyone else!

[Colink2]

Originally Posted by J0K3R5

Added a working INPA that works on e90 N47 engines with no errors.

https://1drv.ms/u/s!ApTXN2OB77W_iZcf..._t3vg?e=E3RYRc

Hi
I have been having issues with INPA E90 and N47
Initially no files installed
Then errors when I found them here
https://www.babybmw.net/forum/viewto...68ef2&start=15

Your link is invalid.
Please add a new link.
If these fiels are on in the Mega.nz list please identify which files work with E90 and N47

Thanks ColinK2

[J0K3R5]

v.4.27.31_PSdZData_Lite

ISTA_v4.27.31 - Sedoy Standalone

added

[J0K3R5]

Originally Posted by Colink2

Hi

If these fiels are on in the Mega.nz list please identify which files work with E90 and N47

Thanks ColinK2

https://mega.nz/folder/wlpHiI4a#f54pFHrRuYfA164xrSTlPA

[KawBoy]

I've ISTA-P 3.67.1.006, courtesy of J0K3R5 [thank you much].
When starting it up with Loader 6.1, I've got these errors:

94201 technical service initialization failed
-2 Global; Unknown
55054 Global; Unknown
10007 (CIP) Fault during initialization of EDIABAS

I am using K-DCAN Bimmergeeks cable [brand new].

As for the ISTA-P install, I've 7unzip it to C:\ and running the loader supplied.

Not sure whether or not this has been covered, but any help would be much appreciated.

Thank you.

[Mike335D85]

Hey JOK3R5
thank you for this fantastic stash of software
ive downloaded ista 4.27.31 and installed it it opens up but is asking me for a licence and registration key have i done something wrong? or missed something?
please help
cheers
mike

[J0K3R5]

Originally Posted by KawBoy

I've ISTA-P 3.67.1.006, courtesy of J0K3R5 [thank you much].
When starting it up with Loader 6.1, I've got these errors:

use Loader 6.4

[J0K3R5]

Originally Posted by Mike335D85

Hey JOK3R5
thank you for this fantastic stash of software
ive downloaded ista 4.27.31 and installed it it opens up but is asking me for a licence and registration key have i done something wrong? or missed something?
please help
cheers
mike

How did you install the program ?
did you use the self installer .exe ?

[KawBoy]

Originally Posted by J0K3R5

use Loader 6.4

Using Loader 6.4 gives me no options under the Connection Manager. Maybe ISTA is thinking I am using NEXT?

Is there an EXE file that I need to run or should I just unzip ISTA-P 3.67.1.006.7z to C:\?

Again, thank you much for your help.

[J0K3R5]

v.4.27.31_PSdZData_Full

added.

grab will you can, as it takes up too much storage space.
will share as long as I can

[J0K3R5]

Originally Posted by KawBoy

Using Loader 6.4 gives me no options under the Connection Manager. Maybe ISTA is thinking I am using NEXT?

Is there an EXE file that I need to run or should I just unzip ISTA-P 3.67.1.006.7z to C:\?

Again, thank you much for your help.

unzip ISTA-P 3.67.1.006.7z to C:\

[Mike335D85]

Originally Posted by J0K3R5

How did you install the program ?
did you use the self installer .exe ?

Yes I used the self installer

[KawBoy]

Originally Posted by J0K3R5

unzip ISTA-P 3.67.1.006.7z to C:\

It just doesn't work for me; I've just reformatted a partition and installed a fresh W10 20H2 and I still have the same error messages. But it is OK. I do have everything else working fine, including ISTA+.

There is one thing though that I'd like to do: I am sure J0K3R5 is not on this for the money, or for any reason other than sharing his stuff with us. I do know that MEGA can get costly though.
If al all possible, I'd like to show an appreciation, a little token of appreciation and donate a few US$ to J0K3R5 to help him offset the cost of having all this stuff for us. If you J0K3R5 is OK with that, please send me your PayPal thing or Zelle and I'll be more than happy to send you something. Please apologize me if this has been covered before.
Thank you.