[NickEs]

Originally Posted by shawnsheridan

If it's EVO ID4, it has an F0 File, and if EVO ID5/6 it has no Nav Enabler File at all, and FSC cannot be generated.

Thank you, Shawn. I apologize for the late thanks; I needed to go to Tampa on a family emergency.

It's disheartening to find that after a year's worth of research, everything I thought I knew about upgrading the maps was wrong.

So, it turns out that my system is ID6 (three tiles per page, not five). Which leaves me with the question: since I evidently can't generate an FSC on my own, can I update the maps on this system at all using E-SYS? If not, what options do I have?

Thank you again!

[shawnsheridan]

Originally Posted by NickEs

Thank you, Shawn. I apologize for the late thanks; I needed to go to Tampa on a family emergency.

It's disheartening to find that after a year's worth of research, everything I thought I knew about upgrading the maps was wrong.

So, it turns out that my system is ID6 (three tiles per page, not five). Which leaves me with the question: since I evidently can't generate an FSC on my own, can I update the maps on this system at all using E-SYS? If not, what options do I have?

Thank you again!

Not E-Sys. Options are OEM FSC Code or Aftermarket EVO Patch and FSC Code set.

[Mario_KGB]

Not sure why but for some reason I cannot pull out the 1b.hex from the car.
I follow the procedure perfectly. I even try with 5 different USB. ALL OF THEM FAT32 formated. i copy that copie_scr.sh file in the root of the all USB but i cannot get it to work.
i even try with some older 4 GB USB sticks but no luck.
Also i just checked that for some reason when i go to check the version of the navigation that i have... it doesn't show me anything.
Its just BLANK

Mine is 523i 2010 F10
Bunch of issues...

How can I even check if it reads my USB after all...

[eec4tuner]

same here..

[Chester Cheng]

I did a video guide so it's easier to understand visually

[Bobf31]

Originally Posted by opjose

Post your VIN.

The glovebox USB port is required to use the script.

You may not have a compatible CIC installed or another model, e.g. business instead.

Ok, I tried as well with some sticks, but do you mean it doesn't work for a Business nav?

I have an 2011 E87 business navi, with Motion maps, last time updated by dealer to 2018 map.
There is a USB port in the glovebox, trief to get the 1b file with smaller USB stick, no result. Checked if it sees the map update on a sandisk 32GB but this one doesn't start the update screen eather.
I downloaded: Road Map Europe WEST MOTION 2021

[shawnsheridan]

Originally Posted by Bobf31

Ok, I tried as well with some sticks, but do you mean it doesn't work for a Business nav?

I have an 2011 E87 business navi, with Motion maps, last time updated by dealer to 2018 map.
There is a USB port in the glovebox, trief to get the 1b file with smaller USB stick, no result. Checked if it sees the map update on a sandisk 32GB but this one doesn't start the update screen eather.
I downloaded: Road Map Europe WEST MOTION 2021

Script works only for CIC Head Unit, so Business Nav not possible.

[Bobf31]

Originally Posted by shawnsheridan

Script works only for CIC Head Unit, so Business Nav not possible.

Ok clear, that saves some trying and failure.

How would we be able to do this for a Business "MOTION" system then?
I tried with SW ID reader as well but that failed as well, probably also looking for the CIC Prof head unit then.

[shawnsheridan]

Originally Posted by Bobf31

Ok clear, that saves some trying and failure.

How would we be able to do this for a Business "MOTION" system then?
I tried with SW ID reader as well but that failed as well, probably also looking for the CIC Prof head unit then.

No, SWID Reader should work. What Head Unit do you have?

[Peter@A]

Originally Posted by Peter@A

Tried 6 USB sticks with no success not getting anything no 1b.hex (and fsc.bat)

[shawnsheridan]

Originally Posted by Peter@A

What is your short VIN (last 7)?

[Peter@A]

Originally Posted by shawnsheridan

What is your short VIN (last 7)?

Thank you, VW02067

Peter

[shawnsheridan]

Originally Posted by Peter@A

Thank you, VW02067

Peter

You have CIC-MID Head Unit (MOTION Map), not CIC (PREMIUM Map). USB 1B File Script File will not work on CIC-MID.

[Peter@A]

Originally Posted by shawnsheridan

You have CIC-MID Head Unit (MOTION Map), not CIC (PREMIUM Map). USB 1B File Script File will not work on CIC-MID.

oh, thanks so i'll have to stick to google maps

[shawnsheridan]

Originally Posted by Peter@A

oh, thanks so i'll have to stick to google maps

Pulling 1B file isn't the only option. You can always buy Map Update cheap.

[Peter@A]

Originally Posted by shawnsheridan

Pulling 1B file isn't the only option. You can always buy Map Update cheap.

Thank you,

Really?? Where?

[shawnsheridan]

Originally Posted by Peter@A

Thank you,

Really?? Where?

PM sent.

[Peter@A]

appreciated

[bujokpl]

Hello, I have a problem with Navi in my father's E84. I plugged the USB drive to get 1b.hex and CIC shutted down. Afterwards I was unable to enter NAVI. I plugged other USB drive to get 1B.hex and it was successfully created. I used it with Jaeger's FSC generator or BMWaicoder 4.6 and Euro East Premium 2021-2 USB. Both programs generated the same code. I printed specific and liftetime code, copied the map files to usb drive and inserted in car. Update started and asked for code. Unfortunately both codes give me faulty code message. What can be wrong?

[shawnsheridan]

Originally Posted by bujokpl

Hello, I have a problem with Navi in my father's E84. I plugged the USB drive to get 1b.hex and CIC shutted down. Afterwards I was unable to enter NAVI. I plugged other USB drive to get 1B.hex and it was successfully created. I used it with Jaeger's FSC generator or BMWaicoder 4.6 and Euro East Premium 2021-2 USB. Both programs generated the same code. I printed specific and liftetime code, copied the map files to usb drive and inserted in car. Update started and asked for code. Unfortunately both codes give me faulty code message. What can be wrong?

PM sent.

[Jmahell]

I feel like I've exhausted this thread and still cannot get system to start update, I had zero issues pulling 1b.hex. See images for details but I believe I have CIC Navi Pro based on my VIN lookup, I have checkmark with i in bottom left corner of Nav screen, I believe I downloaded the correct map type "Road Map NA Premium 2021-1", USB properties state its "File System: FAT32", files are in the root. I plug into my glove box, turn on car and nothing, can someone please help the only other thing I can think of is to get a 32gb usb to have Windows format as FAT32 instead of third party software (I used a 4GB usb formatted to FAT32 by Windows to pull 1b.hex but after downloading maps realized that was to small)

[shawnsheridan]

Originally Posted by Jmahell

I feel like I've exhausted this thread and still cannot get system to start update, I had zero issues pulling 1b.hex. See images for details but I believe I have CIC Navi Pro based on my VIN lookup, I have checkmark with i in bottom left corner of Nav screen, I believe I downloaded the correct map type "Road Map NA Premium 2021-1", USB properties state its "File System: FAT32", files are in the root. I plug into my glove box, turn on car and nothing, can someone please help the only other thing I can think of is to get a 32gb usb to have Windows format as FAT32 instead of third party software (I used a 4GB usb formatted to FAT32 by Windows to pull 1b.hex but after downloading maps realized that was to small)

I hope all of that is not on USB Drive. Only the Config.nfm file and pkgdb folder should be on USB Drive, and both located in USB root folder.