Which INPA version for US/CAN 2009 335D?

808AWD325xi · 01-01-2017, 09:53 AM

Quote:

Originally Posted by ninja_zx11

Thanks 808AWD325xi for the explanation!!

I saw in your attached pic that one function says "Trace recording".Do you know if that function generates different parameters curve?

You're welcome, ninja_zx11!

I don't know, I rarely use that script.

I believe that some versions of INPA for F-Series include it, it's also distributed on its own.

ninja_zx11 · 01-04-2017, 09:05 AM

Quote:

Originally Posted by 808AWD325xi

You're welcome, ninja_zx11!

I don't know, I rarely use that script.

I believe that some versions of INPA for F-Series include it, it's also distributed on its own.

Yes you are right.I found TD-53X script was already there in my Inpa for fxx.I just needed to create a shortcut for the inpaload.exe with td530 start parameter.

I then tried the trace function and found that trace function works as per trace config file which is TRACE.TST in a SGDAT folder.I opened it up with a notepad just to configure so that i can trace boost values on my M57 diesel.

Old values were configured for E60 and were like:

Quote:

1|KOMB65_2|status_ppc_adc_lesen|||stat_tank_hebelg eber1_wert
1|KOMB65_2|status_ppc_adc_lesen|||stat_tank_hebelg eber2_wert
1|KOMB65_2|status_tankinhalt_lesen|||stat_hebelgeb er1_wert
1|KOMB65_2|status_tankinhalt_lesen|||stat_hebelgeb er2_wert

So i tried to configure trace.tst like:

Quote:

1|D73N57C0|STAT_LADEDRUCK_SOLL_WERT|||STAT_LADEDRU CK_WERT

But still it didn't work.

It outputs file but no data like:

Quote:

Result: Read Vehicle Data
-------------------------

PC-Name : DESKTOP-XXXXXX
User-Name : XXXX
Series : E70
Battery : 90 Ah
Volume : All control units
JobStatus : OKAY
----------------------------------------------------------------------------------------------
Adr Groupname Job State State
XX E70 OKAY VIN : LJXXXX
XX E70 OKAY Clamp : 15
XX E70 OKAY I-Level Plant : E070-09-03-525
XX E70 OKAY I-Level HO : E070-14-11-501
XX E70 OKAY FA-order : 0409 FF03
XX E70 OKAY FA detail :
XX E70 OKAY Production Date : 19082009
XX E70 OKAY KM-State Display : 111150
XX E70 OKAY KM-State Absolut : 111153
XX E70 OKAY KM-State CAS : 111150
XX E70 OKAY iGR State : nicht codiert (intelligent generator regulation )
XX E70 OKAY Fuel : H2(L) 21.7 + H1(R) 25.6 = 47.2 Liter
XX E70 OKAY Operating hours : 4.961649E+006 s
XX E70 OKAY Options : 212 220 245 248 2RX 302 316 319 322 328
XX E70 OKAY Options : 386 3AG 402 430 431 441 456 464 488 493
XX E70 OKAY Options : 494 4AB 4NA 4NC 4UB 502 508 521 522 524
XX E70 OKAY Options : 534 544 548 563 609 620 639 645 693 697
XX E70 OKAY Options : 6AA 6AB 6FL 761 823 838 853 876 8S4 8SL
XX E70 OKAY Options : 8SM
XX E70 OKAY E_Words : B090 EWS4

Result: Trace Recording
-----------------------

Date : 03.01.2017 21:45:53
Series : E70
Volume : All control units
JobStatus : OKAY
----------------------------------------------------------------------------------------------
Date Time
03.01.2017 21:45:53
03.01.2017 21:45:53
03.01.2017 21:45:53
03.01.2017 21:45:53
03.01.2017 21:45:53
03.01.2017 21:45:53
03.01.2017 21:45:53
03.01.2017 21:45:53
03.01.2017 21:45:53
03.01.2017 21:45:53
03.01.2017 21:45:53
03.01.2017 21:45:53
03.01.2017 21:45:53
03.01.2017 21:45:53
03.01.2017 21:45:53
03.01.2017 21:45:53
03.01.2017 21:45:53
03.01.2017 21:45:53
03.01.2017 21:45:53
03.01.2017 21:45:53
03.01.2017 21:45:53
03.01.2017 21:45:53
03.01.2017 21:45:53
03.01.2017 21:45:53
03.01.2017 21:45:53
03.01.2017 21:45:53
03.01.2017 21:45:53
03.01.2017 21:45:53
03.01.2017 21:45:53
03.01.2017 21:45:53
03.01.2017 21:45:53
03.01.2017 21:45:53
03.01.2017 21:45:53
03.01.2017 21:45:53
03.01.2017 21:45:53
03.01.2017 21:45:53
03.01.2017 21:45:54
03.01.2017 21:45:54
03.01.2017 21:45:54
03.01.2017 21:45:54
03.01.2017 21:45:54
03.01.2017 21:45:54
03.01.2017 21:45:54
03.01.2017 21:45:54
03.01.2017 21:45:54
03.01.2017 21:45:54
03.01.2017 21:45:54
03.01.2017 21:45:54
03.01.2017 21:45:54
03.01.2017 21:45:54
03.01.2017 21:45:54
03.01.2017 21:45:54
03.01.2017 21:45:54
03.01.2017 21:45:54
03.01.2017 21:45:54
03.01.2017 21:45:54
03.01.2017 21:45:54
03.01.2017 21:45:54
03.01.2017 21:45:54
03.01.2017 21:45:54
03.01.2017 21:45:54
03.01.2017 21:45:54
03.01.2017 21:45:54
03.01.2017 21:45:54
03.01.2017 21:45:54

808AWD325xi could you please give me any ideas?Thanks

808AWD325xi · 01-06-2017, 12:13 PM

Quote:

Originally Posted by ninja_zx11

Yes you are right.I found TD-53X script was already there in my Inpa for fxx.I just needed to create a shortcut for the inpaload.exe with td530 start parameter.

I then tried the trace function and found that trace function works as per trace config file which is TRACE.TST in a SGDAT folder.I opened it up with a notepad just to configure so that i can trace boost values on my M57 diesel.

Old values were configured for E60 and were like:

So i tried to configure trace.tst like:

But still it didn't work.

It outputs file but no data like:

808AWD325xi could you please give me any ideas?Thanks

Hi, ninja_zx11. I should be able to help you.

Based on the E65 example, the key fields are as follows:

Code:

1|SGBD|SGBD Job Name|||SGBD Job Result Name

It looks like you have an E70 X5 3.0sd with a M57D30T2 engine:

Code:

1|D73N57C0|STAT_LADEDRUCK_SOLL_WERT|||STAT_LADEDRU CK_WERT

The SGBD is correct, but STAT_LADEDRUCK_SOLL_WERT is a job result, not a job.

Try this instead:

Code:

1|D73N57C0|status_ladedruck_soll|||stat_ladedruck_soll_wert

If you found this information useful, please click on the Appreciate button at the bottom of this post.

ninja_zx11 · 01-06-2017, 12:37 PM

Quote:

Originally Posted by 808AWD325xi

Hi, ninja_zx11. I should be able to help you.

Based on the E65 example, the key fields are as follows:

Code:

1|SGBD|SGBD Job Name|||SGBD Job Result Name

It looks like you have an E70 X5 3.0sd with a M57D30T2 engine:

Code:

1|D73N57C0|STAT_LADEDRUCK_SOLL_WERT|||STAT_LADEDRU CK_WERT

The SGBD is correct, but STAT_LADEDRUCK_SOLL_WERT is a job result, not a job.

Try this instead:

Code:

1|D73N57C0|status_ladedruck_soll|||stat_ladedruck_soll_wert

If you found this information useful, please click on the Appreciate button at the bottom of this post.

You are absolutely right 808AWD!! Same thing was suggested to me by pheno(author of TestO software) and it worked!!

Please check my this thread here

CaptainBluu · 04-14-2018, 11:14 PM

Stirring up an old thread.

Can you please also PM me the files to make it work?

I have a 2011 335. I've been messing around with files for a few days already and I just can't figure it out.

Thank you,

yazzer · 01-18-2019, 07:14 AM

hi

please send on inpa files for n57 engine

brendan

npoole · 08-17-2020, 08:14 PM

Hi,
Could someone please send me the inpa files for m57 engine.
I have 2009 X5 35d

Thanks

bluewater328 · 08-18-2020, 02:06 AM

https://www.e90post.com/forums/showthread.php?t=1681573

Everything you need is here

04-14-2018, 11:14 PM	#49
CaptainBluu New Member 2 Rep 18 Posts Drives: 2011 BMW 335D Join Date: Apr 2018 Location: Brooklyn, NY iTrader: (0)	Stirring up an old thread. Can you please also PM me the files to make it work? I have a 2011 335. I've been messing around with files for a few days already and I just can't figure it out. Thank you,
	Appreciate 0 Quote

01-18-2019, 07:14 AM	#50
yazzer New Member 2 Rep 9 Posts Drives: 320d Join Date: Mar 2012 Location: ireland iTrader: (0)	inpa n57 engine hi please send on inpa files for n57 engine brendan
	Appreciate 0 Quote

08-17-2020, 08:14 PM	#51
npoole Registered 0 Rep 4 Posts Drives: BMW X5 Join Date: Aug 2019 Location: Ontario iTrader: (0)	Hi, Could someone please send me the inpa files for m57 engine. I have 2009 X5 35d Thanks
	Appreciate 0 Quote

08-18-2020, 02:06 AM	#52
bluewater328 Colonel 626 Rep 2,100 Posts Drives: 2011 bluewater 328i LCI sedan Join Date: Aug 2010 Location: Hawaii iTrader: (0)	https://www.e90post.com/forums/showthread.php?t=1681573 Everything you need is here
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search