F30 Performance brakes in E92 335i

BSM n54iS · 05-14-2019, 10:53 AM

Quote:

Originally Posted by Michaellcoates

So the stoptech measured 63mm from the outside of the hat to the level surface. For reference I remeasured the Zimmerman at 69mm.

Great info thanks!

salpone · 05-15-2019, 06:31 AM

zimmermann E60 345 61mm

BSM n54iS · 05-15-2019, 10:48 AM

Quote:

Originally Posted by salpone

zimmermann E60 345 61mm

Sweet! I have the StopTech Aero slotted rotors up front so trying to find a good match on the rears, I'll check out if zimmerman has any slotted only options

BlueM3Wagon · 05-16-2019, 07:56 PM

Quote:

Originally Posted by BdSM n54iS

Quote:

Originally Posted by salpone

zimmermann E60 345 61mm

[img]https://i.postimg.cc/4dCmD55C/Whats-...t-12-05-14.jpg[/img]
[img]https://i.postimg.cc/9XYrkywS/Whats-...t-12-07-26.jpg[/img]

Sweet! I have the StopTech Aero slotted rotors up front so trying to find a good match on the rears, I'll check out if zimmerman has any slotted only options

So just figured something out. If you measure like you did with the hat faced down, then the 63mm measurement becomes 61mm because there's an additional lip on the backside of the rotor that adds 2mm. See pics for reference.

BlueM3Wagon · 05-18-2019, 03:39 PM

No mod needed on the back for stoptech e60 rotors

BSM n54iS · 05-18-2019, 10:37 PM

Quote:

Originally Posted by Michaellcoates

No mod needed on the back for stoptech e60 rotors

Did you get the eccentric bushing?

BlueM3Wagon · 05-19-2019, 12:46 AM

Quote:

Originally Posted by BdSM n54iS

Quote:

Originally Posted by Michaellcoates

No mod needed on the back for stoptech e60 rotors

Did you get the eccentric bushing?

Yes sorry did have bushings

Rain · 06-12-2019, 03:46 AM

Just to share what happen with my car

Since I was one of the lucky ones with 313's which probably would have clearance issues with the Performance brakes and since I got really good offer for D2 BBK - sub 2k€ (6 pots, 356mm floating discs) and had a friend with front only BBK (AP Racing) I decide to go that route. Hopefully the brake bias won't get that much affected (in his 1M with front only AP Racing its absolutely fine with stock rear brakes).

So hopefully I would be able to share the following months how they perform and I'm primary interested on their track performance. Pads are 50% longer that the stock ones also the caliper is at least 2-3kg lighter than the stock one. The disc is 32mm width and still is about the same weight as the EBC grooved one so overall I also got some nice weight reduction as well and I hope I get rid of bending discs after every track day...

Also just a fast FYI - 18" 2Forge 9J ET30 wheels (my track square setup for slick tyres) have way more clearance than the 19" Performance 313s...

P.S.: The only thing that I don't like so far is that there is no hole on the hat for mounting the disc on the hub which is stupid to me and we will make such soon. Also the brake sensors probably will became obsolete but its the same with AP Racing as well

addictedtoboost · 06-17-2019, 06:03 PM

Quote:

Originally Posted by salpone

zimmermann E60 345 61mm

Part number by chance ??

salpone · 06-18-2019, 12:45 AM

Quote:

Originally Posted by addictedtoboost

Part number by chance ??

[

[/url]

tryingtobebest · 06-21-2019, 02:00 PM

Hey everyone, I have 09 E90 335D LCI, I just got myself a set of Blue 370/380mm calipers coming in a mail and been searching of what else would i possibly need to do at least front conversion but in multiple threads that i have found there is no complete part lists.
#1 Im thinking to go with Akebono euro pads and 2 Piece front rotors, thinking of ECS but anyone else dealt with other less expensive brands that offer 2Pice fronts?
#2 Will my stock E90 335 front brake lines work with this Brembo calipers?
#3 Also for people who retrofit rears, will rear stock brake lines work?
#4 Anyone using 2 piece rotors in the rear?
#5 For everyone with E60 rotors, you ever though of going with ECStuning "HELLA Pagid High Carbon Brake 2piece Rotors (34216763827HCKT)" - Here is the link to ECS - Their explanation is very confusing! The price of $287 is for TWO rotors or ONE?
Also how about Rockauto Pagid 2piece rotors? ("PAGID 355123231 OE Two Piece Design Made in Europe (Aluminum Hat, High Carbon Friction Ring, Fully Coated)Rear; 535i Base Model") Rockauto has them for $112 each...

Please let me know at least about brake lines...

335d cypis · 06-25-2019, 03:00 AM

Please Tell me What is minimal spacer between 313 wheel and f30 caliper on rear to avoid collision between them.

mad1stgen · 06-28-2019, 07:38 AM

Quote:

Originally Posted by 335d cypis

Please Tell me What is minimal spacer between 313 wheel and f30 caliper on rear to avoid collision between them.

5mm spacer gives approx 3mm clearance on a 19" 313 wheel.

danthomoo · 07-13-2019, 07:00 AM

Finally bought the first piece to start this mod, pair of M4 calipers for an absolute steal, just a few other bits to get now...does anyone know if the German fella on here still selling the eccentric spacers?

ki_soarer · 07-14-2019, 12:53 PM

335d cypis makes and sells them.

Aus335iguy · 07-14-2019, 02:52 PM

Still waiting for the 380mm kit. How far way is it ?

danthomoo · 07-14-2019, 03:31 PM

Quote:

Originally Posted by ki_soarer

335d cypis makes and sells them.

thanks for the info mate, I'll shoot him a P.M

BSM n54iS · 07-14-2019, 09:04 PM

Whats the best way to get the rear caliper bushings out? I thought I could take a wheel bolt and hammer it but that thing is snug in there, put a little heat on but it spread out a lot...is it safe to go harder on it? Dont wanna damage the caliper

ki_soarer · 07-14-2019, 09:30 PM

I put mine on the edge of a bench and hit it lightly with a hammer till they came out. Once they started moving it didn't take much to get them out. Just make sure you support the back of the caliper while pressing the bushings out.

335d cypis · 07-14-2019, 11:06 PM

Quote:

Originally Posted by Aus335iguy

Still waiting for the 380mm kit. How far way is it ?

Ive got them

Aus335iguy · 07-15-2019, 03:54 AM

Quote:

Originally Posted by 335d cypis

Quote:

Originally Posted by Aus335iguy

Still waiting for the 380mm kit. How far way is it ?

Ive got them

Pics? Prices ? Other information ?

335d cypis · 07-15-2019, 07:21 AM

very simmilar to rear. but m12 price is also simmilar

05-15-2019, 06:31 AM	#1762
salpone Second Lieutenant 125 Rep 220 Posts Drives: Bmw E92 320d Msport Join Date: Dec 2017 Location: italia iTrader: (0)	zimmermann E60 345 61mm
	Appreciate 1 BSM n54iS2684.50 Quote

05-18-2019, 03:39 PM	#1765
BlueM3Wagon Captain 856 Rep 943 Posts Drives: 2012 M3 e91 Join Date: Mar 2017 Location: Kettering ohio iTrader: (2)	No mod needed on the back for stoptech e60 rotors Attached Images __________________ 2012 E91m3 custom build Follow on Instagram: BlueM3wagon
	Appreciate 7 BSM n54iS2684.50 Seattlesquash894.50 ki_soarer129.00 IllSic_Design2122.50 Will_460cs209.00 feuer4275.50 thormessiah164.50 Quote

06-12-2019, 03:46 AM	#1768
Rain Private First Class 39 Rep 118 Posts Drives: BMW X3 G01 LCI 30e Join Date: Nov 2015 Location: Bulgaria iTrader: (0)	Just to share what happen with my car Since I was one of the lucky ones with 313's which probably would have clearance issues with the Performance brakes and since I got really good offer for D2 BBK - sub 2k€ (6 pots, 356mm floating discs) and had a friend with front only BBK (AP Racing) I decide to go that route. Hopefully the brake bias won't get that much affected (in his 1M with front only AP Racing its absolutely fine with stock rear brakes). So hopefully I would be able to share the following months how they perform and I'm primary interested on their track performance. Pads are 50% longer that the stock ones also the caliper is at least 2-3kg lighter than the stock one. The disc is 32mm width and still is about the same weight as the EBC grooved one so overall I also got some nice weight reduction as well and I hope I get rid of bending discs after every track day... Also just a fast FYI - 18" 2Forge 9J ET30 wheels (my track square setup for slick tyres) have way more clearance than the 19" Performance 313s... P.S.: The only thing that I don't like so far is that there is no hole on the hat for mounting the disc on the hub which is stupid to me and we will make such soon. Also the brake sensors probably will became obsolete but its the same with AP Racing as well Attached Images __________________ X3 G01 LCI 30e 22'
	Appreciate 0 Quote

06-21-2019, 02:00 PM	#1771
tryingtobebest First Lieutenant 87 Rep 369 Posts Drives: E90 Join Date: Oct 2012 Location: Calgary, Ab iTrader: (3)	Hey everyone, I have 09 E90 335D LCI, I just got myself a set of Blue 370/380mm calipers coming in a mail and been searching of what else would i possibly need to do at least front conversion but in multiple threads that i have found there is no complete part lists. #1 Im thinking to go with Akebono euro pads and 2 Piece front rotors, thinking of ECS but anyone else dealt with other less expensive brands that offer 2Pice fronts? #2 Will my stock E90 335 front brake lines work with this Brembo calipers? #3 Also for people who retrofit rears, will rear stock brake lines work? #4 Anyone using 2 piece rotors in the rear? #5 For everyone with E60 rotors, you ever though of going with ECStuning "HELLA Pagid High Carbon Brake 2piece Rotors (34216763827HCKT)" - Here is the link to ECS - Their explanation is very confusing! The price of $287 is for TWO rotors or ONE? Also how about Rockauto Pagid 2piece rotors? ("PAGID 355123231 OE Two Piece Design Made in Europe (Aluminum Hat, High Carbon Friction Ring, Fully Coated)Rear; 535i Base Model") Rockauto has them for $112 each... Please let me know at least about brake lines... __________________ TTBB Build Thread, 335D Review - UPDATED Sep 2019 TTBB E90 with 19" VMR V703 (VB3) and aggressive fitment Last edited by tryingtobebest; 06-21-2019 at 02:06 PM..
	Appreciate 0 Quote

06-25-2019, 03:00 AM	#1772
335d cypis Private 84 Rep 76 Posts Drives: BMW 335d e91, f30 330i, e65LCI Join Date: Feb 2019 Location: POLAND SILESIA iTrader: (0)	Please Tell me What is minimal spacer between 313 wheel and f30 caliper on rear to avoid collision between them. Last edited by 335d cypis; 06-25-2019 at 03:39 AM..
	Appreciate 1 Aus335iguy650.00 Quote

07-13-2019, 07:00 AM	#1774
danthomoo Enlisted Member 14 Rep 43 Posts Drives: E92 335i N54 Join Date: Oct 2018 Location: Oxfordshire, UK iTrader: (0)	Finally bought the first piece to start this mod, pair of M4 calipers for an absolute steal, just a few other bits to get now...does anyone know if the German fella on here still selling the eccentric spacers?
	Appreciate 1 Aus335iguy650.00 Quote

07-14-2019, 12:53 PM	#1775
ki_soarer Second Lieutenant 129 Rep 264 Posts Drives: 2010 335D Join Date: May 2018 Location: MD iTrader: (1)	335d cypis makes and sells them.
	Appreciate 1 Aus335iguy650.00 Quote

07-14-2019, 02:52 PM	#1776
Aus335iguy Colonel 650 Rep 2,139 Posts Drives: 2009 e92 335i MSport DCT Join Date: Jul 2015 Location: Sydney Aus iTrader: (0) Garage List 2009 BMW 335i [10.00]	Still waiting for the 380mm kit. How far way is it ? __________________ When you doppelkaplung you doppel your fun.
	Appreciate 0 Quote

07-14-2019, 09:04 PM	#1778
BSM n54iS Brigadier General 2685 Rep 4,202 Posts Drives: '11 335is \| '16 Macan Turbo Join Date: Aug 2015 Location: Everywhere and Nowhere iTrader: (7)	Whats the best way to get the rear caliper bushings out? I thought I could take a wheel bolt and hammer it but that thing is snug in there, put a little heat on but it spread out a lot...is it safe to go harder on it? Dont wanna damage the caliper __________________ '11 335is BSM MT "BMW Performance Editon" \| '16 Porsche Macan Turbo GruppeM CF Intake \| AR Resonated DP \| ER CP \| Turbosmart RacePort BOV \| Cobb FMIC \| RB Inlets \| RB External Mishi/Turner OCC \| Michelin PS4 \| BMW Performance Springs/Bilstein B8 + Dinan & M3 bits \| BMW Brembo BBK \| BMW Performance CF Spoiler \| BMW Performance CF Lip \| BMW Performance Alcantara \| PS Designs GTS Armrest \| AG H6-40 \| Rear Seat Delete
	Appreciate 0 Quote

07-14-2019, 09:30 PM	#1779
ki_soarer Second Lieutenant 129 Rep 264 Posts Drives: 2010 335D Join Date: May 2018 Location: MD iTrader: (1)	I put mine on the edge of a bench and hit it lightly with a hammer till they came out. Once they started moving it didn't take much to get them out. Just make sure you support the back of the caliper while pressing the bushings out.
	Appreciate 1 BSM n54iS2684.50 Quote

07-15-2019, 07:21 AM	#1782
335d cypis Private 84 Rep 76 Posts Drives: BMW 335d e91, f30 330i, e65LCI Join Date: Feb 2019 Location: POLAND SILESIA iTrader: (0)	very simmilar to rear. but m12 price is also simmilar __________________ Cypis E91lci 335d f30lci330i e65lci730d e32740i
	Appreciate 0 Quote