[TunafishE93]

Dedicated to 98G0B N55

Once you get your software going https://www.e90post.com/forums/showthread.php?t=1787691 we will look at basic to tuning. You can share your bin's here https://www.e90post.com/forums/showthread.php?t=1787693 .

This will not go into detail on what tables do but feel free to ask. There are good guides on what tables do here https://www.e90post.com/forums/showthread.php?t=1693922 and here https://cobbtuning.atlassian.net/wik...5+Tuning+Guide

I idea around this guide is to have you do a tune by adjusting load with load ceiling (main).

Load Difference Ceiling- Set to 65.

Boost Limit Multiplier- Set to 3 on all.

Load Limit Factor- Set to 1 on all.

Modeled torque limit 1, 2, torque request ceiling (manual), (dct) and (auto)- all set to 900

Now just use Load Ceiling (main) to adjust target load.