[markie864]

Just purchased my e92 looking to see where do i need to tap into power to run my hardwire kit. And help would be greatly appreciated!

[Will335i]

I used an add a circuit and plugged so that it reversible and then ran the wire up the passenger side A pillar. I will go take a look at which spot in the fuse in a few minutes.

If you want to tap a power wire you should be able to find one in the overhead console wiring. BMW likes to use red w/ yellow stripe for power but refer to a wiring diagram for verification.

[markie864]

Originally Posted by Will335i

I used an add a circuit and plugged so that it reversible and then ran the wire up the passenger side A pillar. I will go take a look at which spot in the fuse in a few minutes.

If you want to tap a power wire you should be able to find one in the overhead console wiring. BMW likes to use red w/ yellow stripe for power but refer to a wiring diagram for verification.

Sounds good just let me know thanks again bud

[Will335i]

You can see in the pictures where I have it grounded and where the add a circuit is. I have it going into slot 28 but depending on the year of yours you might want to use a different slot. For mine 28 is for the overhead console and PDC.