Oil Filter Tool

jc_bmw · 08-22-2013, 08:42 PM

I got a 2009 E90 and I was wondering what size is the filter removal tool and where can I find one cheap?

I believe it is 86mm with 16 flutes?

bhmax16 · 08-23-2013, 10:46 AM

Literally any auto parts store has a tool that fits. It seems you already measured and counted the flutes, but most would also let you walk out and test fit a few so you can buy the one that fits.

For what it's worth I have a master kit from astro pneumatic that was really cheap that I bought years ago. It has about 7-9 different sizes in it that have worked on every filter I have ever encountered in automotive as well as motorcycles. I paid $29 for the entire kit

jc_bmw · 08-23-2013, 10:58 AM

The auto parts store around my area doesn't seem to be that great.... so I might need to look online.

Three_thirty_I · 08-23-2013, 11:11 AM

I bought a stamped steal oil filter wrench for my car and yes, something along those lines in terms of size and 16 sided. But it's for a Volvo! So have to trick my car into looking the other way when getting this tool out! LOL

Works fine, but does tend to "wedge" itself to the oil filter cap, and of course since the engine has to be warm (operating temperature) before draining, this get really hot! But once you refit the cap and lightly torque it up, all you need to do to release it is lightly turn the wrench back, then off she goes...

bimmertt · 08-23-2013, 11:34 AM

I use a rubber strap wrench. Easier to find and cheaper.

jc_bmw · 08-25-2013, 09:49 AM

I guess something like this will work ?

http://www.ebay.ca/itm/190875554221?...84.m1438.l2648

mlifxs · 08-25-2013, 11:04 AM

I bought one from Walmart, the kind that looks like a cap that fits over the top of the filter. It was not snug enough...
however...
all you need is some duct tape or a microfiber towel to fit over the filter to snug it up. works fine.

Three_thirty_I · 08-25-2013, 04:14 PM

Here is the tool that I bought and mentioned above...

Raptor3DPilot · 08-28-2013, 11:22 AM

I purchased a rubber strap wrench and it worked pretty good. I also used a paint pen and placed a little mark on the cap/block so I could tighten the cap correctly.

F32Fleet · 08-28-2013, 01:50 PM

Try to find the proper tool and not buy a strap wrench. Something tells me a strap wrench isn't good for the seal of the oil filter housing.

jc_bmw · 08-28-2013, 02:34 PM

Asked a dealer and they said they don't sell it. Try eBay.

Three_thirty_I · 08-29-2013, 08:30 AM

Quote:

Originally Posted by Socom

Try to find the proper tool and not buy a strap wrench. Something tells me a strap wrench isn't good for the seal of the oil filter housing.

This is a good point! Since the oil filter housing gasket is a known fail item, my suspicion is that it is unsettled/damaged by possibly too aggressive loosening/tightening of the oil filter cap. So the trick is to apply gentle and gradual force, and not "yank" it loose or tight. And I suppose with the strap it might also apply the force slightly off centre compared to the proper wrench tool. The wrench tool that I bought was really cheap actually, but was a bit tricky to find, but definitely worth the trouble getting it.

Unicron · 09-13-2013, 07:48 PM

I bought an 86mm 16 flute tool from Pep Boys for $5.99

jc_bmw · 09-13-2013, 09:51 PM

Quote:

Originally Posted by Unicron

I bought an 86mm 16 flute tool from Pep Boys for $5.99

do you have the part number?

mi_bimmer · 10-04-2013, 12:31 PM

Part# A261 at Pep Boys

jc_bmw · 10-19-2013, 12:04 AM

Quote:

Originally Posted by mi_bimmer

Part# A261 at Pep Boys

Thanks! Just picked it up at Pep Boys. Looks like it fits but also seems to have a slight amount of play.

1QuikWS6 · 10-28-2013, 05:54 PM

I use the aluminum tool from Schwaben at ECSTuning:

http://www.ecstuning.com/Search/Site...ool/ES2167951/

They also make a stamped steel version, but it's not as rugged:

http://www.ecstuning.com/Search/Site...r_Tool/ES8202/

Casca · 10-28-2013, 07:13 PM

I have all sorts of strap wrenches. Using strap wrenches just felt like I was putting a lot of pressure on one side and may possibly do permanent damage. You are better off getting the 86mm socket.

This experience was in the case where a strap wrench was not enough to loosen the cap. I am sure if it was a case where slightly better than finger effort was needed, a strap wrench would have been fine.

I never thought I'd need more than finger effort. But one oil change evolution, I did. And a strap wrench just felt like it was going to cave in and crack one side of the cap.

08-22-2013, 08:42 PM	#1
jc_bmw First Lieutenant 59 Rep 383 Posts Drives: 2009 BMW 328i E90 Join Date: Jun 2013 Location: Markham, Ontario iTrader: (3)	Oil Filter Tool I got a 2009 E90 and I was wondering what size is the filter removal tool and where can I find one cheap? I believe it is 86mm with 16 flutes?
	Appreciate 0 Tweet Quote

08-23-2013, 10:46 AM	#2
bhmax16 Lieutenant 164 Rep 401 Posts Drives: '22 M4, '23 CX-50 Join Date: Jul 2011 Location: North Carolina iTrader: (0)	Literally any auto parts store has a tool that fits. It seems you already measured and counted the flutes, but most would also let you walk out and test fit a few so you can buy the one that fits. For what it's worth I have a master kit from astro pneumatic that was really cheap that I bought years ago. It has about 7-9 different sizes in it that have worked on every filter I have ever encountered in automotive as well as motorcycles. I paid $29 for the entire kit
	Appreciate 0 Quote

08-23-2013, 10:58 AM	#3
jc_bmw First Lieutenant 59 Rep 383 Posts Drives: 2009 BMW 328i E90 Join Date: Jun 2013 Location: Markham, Ontario iTrader: (3)	The auto parts store around my area doesn't seem to be that great.... so I might need to look online.
	Appreciate 0 Quote

08-23-2013, 11:11 AM	#4
Three_thirty_I Lieutenant Colonel 200 Rep 1,834 Posts Drives: '05 E90 330i Manual Join Date: Aug 2010 Location: Cape Town, South Africa iTrader: (0) Garage List 2005 BMW E90 330i [0.00]	I bought a stamped steal oil filter wrench for my car and yes, something along those lines in terms of size and 16 sided. But it's for a Volvo! So have to trick my car into looking the other way when getting this tool out! LOL Works fine, but does tend to "wedge" itself to the oil filter cap, and of course since the engine has to be warm (operating temperature) before draining, this get really hot! But once you refit the cap and lightly torque it up, all you need to do to release it is lightly turn the wrench back, then off she goes... __________________ BMW E90 330i (M) '05 (His) \| (Hers) BMW E46 320i f/l (M) '03
	Appreciate 0 Quote

08-23-2013, 11:34 AM	#5
bimmertt Lieutenant Colonel 93 Rep 1,794 Posts Drives: 2007 e92 335i Join Date: Nov 2008 Location: Earth iTrader: (7)	I use a rubber strap wrench. Easier to find and cheaper.
	Appreciate 0 Quote

08-25-2013, 09:49 AM	#6
jc_bmw First Lieutenant 59 Rep 383 Posts Drives: 2009 BMW 328i E90 Join Date: Jun 2013 Location: Markham, Ontario iTrader: (3)	I guess something like this will work ? http://www.ebay.ca/itm/190875554221?...84.m1438.l2648
	Appreciate 0 Quote

08-25-2013, 11:04 AM	#7
mlifxs Diamond Geezer 212 Rep 2,385 Posts Drives: Jet Black 2007 328i Saloon Join Date: Nov 2007 Location: Florida iTrader: (6) Garage List 2016 VW Golf Sportw ... [10.00]	I bought one from Walmart, the kind that looks like a cap that fits over the top of the filter. It was not snug enough... however... all you need is some duct tape or a microfiber towel to fit over the filter to snug it up. works fine.
	Appreciate 0 Quote

08-25-2013, 04:14 PM	#8
Three_thirty_I Lieutenant Colonel 200 Rep 1,834 Posts Drives: '05 E90 330i Manual Join Date: Aug 2010 Location: Cape Town, South Africa iTrader: (0) Garage List 2005 BMW E90 330i [0.00]	Here is the tool that I bought and mentioned above... __________________ BMW E90 330i (M) '05 (His) \| (Hers) BMW E46 320i f/l (M) '03
	Appreciate 0 Quote

08-28-2013, 11:22 AM	#9
Raptor3DPilot New Member 4 Rep 6 Posts Drives: 2006 330i w/Sport Package Join Date: Aug 2013 Location: Las Vegas, NV iTrader: (0)	I purchased a rubber strap wrench and it worked pretty good. I also used a paint pen and placed a little mark on the cap/block so I could tighten the cap correctly.
	Appreciate 0 Quote

08-28-2013, 01:50 PM	#10
F32Fleet Lieutenant General 3570 Rep 10,351 Posts Drives: 2015 435i Join Date: May 2005 Location: Southeastern US iTrader: (0)	Try to find the proper tool and not buy a strap wrench. Something tells me a strap wrench isn't good for the seal of the oil filter housing.
	Appreciate 0 Quote

08-28-2013, 02:34 PM	#11
jc_bmw First Lieutenant 59 Rep 383 Posts Drives: 2009 BMW 328i E90 Join Date: Jun 2013 Location: Markham, Ontario iTrader: (3)	Asked a dealer and they said they don't sell it. Try eBay.
	Appreciate 0 Quote

09-13-2013, 07:48 PM	#13
Unicron Banned 0 Rep 12 Posts Drives: 2009 335xi sport w/ summers Join Date: Sep 2013 Location: NJ iTrader: (0)	I bought an 86mm 16 flute tool from Pep Boys for $5.99
	Appreciate 0 Quote

10-04-2013, 12:31 PM	#15
mi_bimmer Private 2 Rep 56 Posts Drives: 2006 325i E90 N52 Join Date: Dec 2012 Location: SE Michigan iTrader: (0)	Part# A261 at Pep Boys
	Appreciate 0 Quote

10-28-2013, 05:54 PM	#17
1QuikWS6 No 55mph 1619 Rep 8,476 Posts Drives: F32 435ix MSport Join Date: Jul 2009 Location: Blitzburgh, PA iTrader: (113) Garage List 2022 BMW M440ix Vert [0.00] 2015 BMW 435ix MSport [0.00] 2000 Pontiac Trans Am [0.00]	I use the aluminum tool from Schwaben at ECSTuning: http://www.ecstuning.com/Search/Site...ool/ES2167951/ They also make a stamped steel version, but it's not as rugged: http://www.ecstuning.com/Search/Site...r_Tool/ES8202/ __________________ F32 435ix//MGM//M Sport-Prem-Tech-Driver Assist-Lighting-Cold Weather-Dyn Handling Pkgs//M4 Black Lthr Int w/M4 Alum Blade Trim//HK w/Bavsound Stg3//763M//M4 Euro LCI Tails//M4 Mirrors w/CF Covers//AWCarbon CF F/R Spoilers-Side Splitters-Diffuser 6WB/ID6 HU+HUD/IND M4 Alcantara Armrest//PURE S2 Turbo//AA FMIC+DP//ER CP+TIC//3.5bar TMAP/TS DV//AWE Tuning Exh w/Blk Tips//Turner MS CF Intake//BM3 Cary Jordan Tune//MPerf Diff//PrecRW Ignition Kit
	Appreciate 0 Quote

10-28-2013, 07:13 PM	#18
Casca Captain 41 Rep 642 Posts Drives: E90 6MT Join Date: May 2010 Location: California iTrader: (0)	I have all sorts of strap wrenches. Using strap wrenches just felt like I was putting a lot of pressure on one side and may possibly do permanent damage. You are better off getting the 86mm socket. This experience was in the case where a strap wrench was not enough to loosen the cap. I am sure if it was a case where slightly better than finger effort was needed, a strap wrench would have been fine. I never thought I'd need more than finger effort. But one oil change evolution, I did. And a strap wrench just felt like it was going to cave in and crack one side of the cap.
	Appreciate 0 Quote