|
|
|
|
PLEASE HELP SUPPORT E90POST BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER, THANKS! |
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
JWL spec (OEM vs. "Made in China")
|
|
Wheels and Tires forum Sponsored by The Tire Rack
Please help to directly support e90post by doing your tirerack shopping from the above link. For every sale made through the link, e90post gets sponsor support to keep the site alive. Disclaimer |
|
Thread Tools | Search this Thread |
11-19-2021, 06:38 PM | #1 |
Private First Class
16
Rep 103
Posts |
JWL spec (OEM vs. "Made in China")
So I have had a heck of a merry-go-round with wheels. I got a set of 162 staggered OEM wheels from Craigslist (8" fronts / 8.5" rears). But I had trouble finding 255/35R18 tires that would match the rolling circumference of the 225/40R18 fronts (that's the OEM setup for AWD) in the same tire. Thanks for irreparably damaging the supply chain... you-know-who.
So I went out and bought some new non-OEM wheels in style 162 18x8.5 ET39 to match the rears I have with the intention of running them in a square setup. The site that sold them says very clearly "manufactured to the same JWL specification as OEM wheels". They were reasonabley priced... but they are also not ridiculously cheap. They shipped from Ohio so I figure, probably a decent wheel. Well, they arrived and right away they felt a little bit lighter than the OEM's to me. They are stamped JWL, but by other research says that's not something you can rely on. Also stamped on them is a 660KG load limit, which seems like it might be low. Anybody know what the load rating is for the OEM wheels (I can't find it stamped on them), and any opinions if 660KG load rating is safe on a 335xi that is going to be running them in the rear, and OEM in the front? |
Bookmarks |
Tags |
load rating, wheels |
|
|