[tacaza]

Originally Posted by Scrippy

It depends which of the 4 modules you chose in coding. There are two modules of the four that CIC can use. The difference is NTSC or PAL. You are correct that their are MOST modules the other two parameters look for. I am almost positive the CCC is the same. There are (4) video ports in a CIC and (1)in CCC.

I think CIC only has 3 video input

[Scrippy]

Originally Posted by tacaza

I think CIC only has 3 video input

Ok

[CHENG SHIANG]

Originally Posted by terminator2k2

here it is:



if your going to be using the proper oem connectors.....

run wire from video + to pin 6 of the 18 pin baseplate connector

run wire from video - to pin 7 of the 18 pin baseplate connector



I rewired my video and audio out from the 18 pin baseplate connector and put phonos/rca connectors on them. I already had female connectors from when I used the video/audio and usb cable.

I think taking apart the base plate doesn't really need a tutorial....its self explanatory when you have one in your hands....

Hello,
About the wiring problem of the third wire (video shield)
Is it welding from the baseplate where? I want to going to be using the proper oem connectors.....

run wire from video + to pin 6 of the 18 pin baseplate connector
run wire from video - to pin 7 of the 18 pin baseplate connector

run wire from video shield to pin 15 of the 18 pin baseplate connect
Where is the video shield in the baseplate?
Can u help me?

[pelon222]

Originally Posted by Scrippy

It depends which of the 4 modules you chose in coding. There are two modules of the four that CIC can use. The difference is NTSC or PAL. You are correct that their are MOST modules the other two parameters look for. I am almost positive the CCC is the same. There are (4) video ports in a CIC and (1)in CCC.

What option needs to be coded for this to work?

[CHENG SHIANG]

Who can provide the fbas shield from where the cradle pcb is connected to the pin15?

[DimitrisM3]

Hello I have problem with the base blate after same big job I install nbt unit !
Know doesn’t recognize the phone only give power for the telephone
Any suggestions?

[g8mail1216]

Originally Posted by terminator2k2

here it is:



if your going to be using the proper oem connectors.....

run wire from video + to pin 6 of the 18 pin baseplate connector

run wire from video - to pin 7 of the 18 pin baseplate connector



I rewired my video and audio out from the 18 pin baseplate connector and put phonos/rca connectors on them. I already had female connectors from when I used the video/audio and usb cable.

I think taking apart the base plate doesn't really need a tutorial....its self explanatory when you have one in your hands....

Hi,

I am on the same way that you did and read your complete article about the retrofit of iphone video out with snap-in, I am a little confused with the part "rewire video and audio out from 18 pin baseplate connector an put phonos/rca connectors onthem" , could you please describe more clear how to make it? thanks.

Regards,