[stel_i79]

hey NICK
nice to see u are back posting
if u still interested to sell your evo please let me know
i would love to buy it from you
best regards
steli

[The-Traveler]

Originally Posted by domdel

Hi DLS
I would like to hear more about this. I've been having a hard time trying to flash one of my Nbt evos. Any of your knowledge would be greatly
appreciated. In particular, i would like to hear about the timings to flash and the connection with usb to ethernet adapter, I thought this was only possible on cic. thanks dom

Anyway you can help me with this, please? I have retrofitted hw4 nbt evo (id6) running formware O and want to flash with esys but run into no gateway problems.

Using ENET through OBD2. E92 LCI had enet pins in OBD.

[antoxa256]

Hello everyone!

I’m wondering if someone might’ve experienced the issues that Im having now and can help:
I’m installing the NBT Evo into my E60, using the adapter from BimmerRetrofit (turned out to be a piece of crap and the customer support is on par).
The adapter has a number of bugs, but the main show stopper is that it prevents my car from going to sleep - car stays active and “agitated” even after I lock it. Sometimes everything works great so nbt and adapter would go to sleep couple seconds after car goes to sleep. But later if I wake up the car by opening the door for example - it can stay in a wake state forever.
So maybe someone had similar problems.

I’ve disabled the sleep_delay in evo and it helped a bit, but didn’t fix the problem.
It feels like the CAS can’t go to sleep because of some illegal can-chatter on the bus, when there shouldn’t be any. And if I disconnect the plug from the adapter - the car and nbt goes to sleep right away.

Any input is welcome here Cheers guys!

[calicoupe]

Originally Posted by The-Traveler

I got everything working

Did you also get echo cancellation to work on the IA amp? Interested to see if this is possible without swapping to an F30 L7 amp.
TIA!

[The-Traveler]

Originally Posted by calicoupe

Did you also get echo cancellation to work on the IA amp? Interested to see if this is possible without swapping to an F30 L7 amp.
TIA!

I did not, I think it is possible with bench flashing equipment and direct PCB access.

[Teq]

Originally Posted by Nickco43

I made it work.

Can anyone explain why are connectors made iso use the shark fin which comes with the atm module?

Does the atm module has to be mounted in a special direction?

[Teq]

No one?

[The-Traveler]

Originally Posted by Teq

No one?

What are you asking?

[Teq]

The picture Nickco43 posted he made 4 connectors. I want to know why he didn't use the sharkfin which goes with the atm.
Also does the atm has a mandatory installation position or can you just install it on its side?