[ASPEC135i]

Fixed! Made a trip to Ivo @ Columbus Automotive and he had me all sorted out. Very knowledgable and friendly guy! Definately will be going back for future jobs/diagnostics.

Had my downpipes installed as well when I was there. Unfortunately one of my o2 sensor's thread stripped when being uninstalled from the old OEM downpipes. Had to have one replaced on top of labor costs @ $270

[surendrant]

Did you clear your CEL and read the code? Street Xtreme in Markham seem to be a good group of guys, they did my car and a couple others on this forum.

[n52330i]

Did you plug boost sensor back in? My brother install his and he forgot to plug and ran bad.

Check wire to boost sensor on pipe.

[AP2]

Originally Posted by ASPEC135i

Hi all,

Installed Active Autowerkes CP+BOV combo and somehow now, I'm not able to get any boost! (Not even a lb of boost according to jb4 fuel hijack guage and butt dyno - car feels N/A) Chargepipe on the manifold end popped off after my first drive with it and triggered a engine malfunction light (big half filled engine icon). I've checked all the connections on the cold side (side that I touched during CP+BOV install) and every connection seems nice and tight.

I'm driving around with no boost and its not fun! I want to take it to a shop/mechanic who knows what they are doing to take a look (check vaccuum lines, pressure test, possibly smoke test?).

I am aware of RMP Motors / Ivo@Columbus, but they are pretty far west to me. Could anyone recommend other shops/mechanics that they have dealt before???

Thanks guys!

Advanced Knowledge Automotive in Richmond Hill.

[Mike@N54Tuning.com]

Clear all codes and try again. If you have a boost leak you should get another code. Make sure the CP is installed correctly and you plugged everything back in, including the TMAP sensor.

Mike