[///M3NACE]

I have the BMS and its ready to be installed. I searched but couldn't find anything on how to switch the maps? How do I know which map im on? Can someone clarify this for me?

[LLinxuS]

BMS Power Box Map Guide

Map 0 - Disables BMS Power Box (Stock)
Map 1 - 30% throttle remapping, performance tuning on
Map 2 - 60% throttle remapping, performance tuning on
Map 3 - 100% throttle remapping, performance tuning on
Map 4 - 30% throttle remapping, performance tuning off
Map 5 - 60% throttle remapping, performance tuning off
Map 6 - 100% throttle remapping, performance tuning off
Map 7 - throttle remapping disabled, performance tuning on

BMS Power Box
How to Switch Maps from the Driver's Seat

Insert the keyfob and press the start button to turn the ignition on (lights on the dash but the engine is not running). Press and hold the gas pedal down to the floor for 4 seconds or more, then release. This puts the Power Box into listen mode. If you start the engine at this point you will be on map 0. For performance maps press the gas pedal to the floor and quickly release one time for each map you would like to select. For example, for map 3 press and release the gas 3 times, then start the engine. Your map setting will be saved until it is changed.

[c_jeong89]

you don't know what map you are on well nothing will tell you visually.

[Mike@N54Tuning.com]

Originally Posted by LinxuS

BMS Power Box Map Guide

Map 0 - Disables BMS Power Box (Stock)
Map 1 - 30% throttle remapping, performance tuning on
Map 2 - 60% throttle remapping, performance tuning on
Map 3 - 100% throttle remapping, performance tuning on
Map 4 - 30% throttle remapping, performance tuning off
Map 5 - 60% throttle remapping, performance tuning off
Map 6 - 100% throttle remapping, performance tuning off
Map 7 - throttle remapping disabled, performance tuning on

BMS Power Box
How to Switch Maps from the Driver's Seat

Insert the keyfob and press the start button to turn the ignition on (lights on the dash but the engine is not running). Press and hold the gas pedal down to the floor for 4 seconds or more, then release. This puts the Power Box into listen mode. If you start the engine at this point you will be on map 0. For performance maps press the gas pedal to the floor and quickly release one time for each map you would like to select. For example, for map 3 press and release the gas 3 times, then start the engine. Your map setting will be saved until it is changed.

Thanks

Mike

[Neutrino45]

You should have received a little pocket MAP Guide card. Call your vendor for one!

[///M3NACE]

Honestly when i came home my sister ripped the box open thew it out and said some wire thing came and i threw the box out and assuming it was everything in it. Just took out the plastic inside. Oh well but I guess I just have to do some runs and see which maps I like.

[David328M-Sport]

Originally Posted by ihsanshaik

I just have to do some runs and see which maps I like.

Map 3 for me all the way!!!!