3-stage Intake Manifold

just4kickz · 04-02-2008, 04:22 PM

Quote:

Originally Posted by westwest888

Can you elaborate on what software you got, who sells it, and what it does?

search.

DTE Systems or something.

http://www.chiptuning.com/conf_prod_...0PS&no_cache=1

dunno why you would need a 330i flash if you have this flash...

Andrew@ET · 04-02-2008, 07:37 PM

hey this guy in this thread did this http://www.e90post.com/forums/showth...25#post2414525 he has an e90 328i !!! just read down... it is possible for 328's !

Driv3r · 04-02-2008, 09:26 PM

Quote:

Originally Posted by westwest888

As I understand it the 325i is very understated for power compared to the 330i, which is probably accurate per the marketing. Was it Car and Driver who got a 0-60 of 6.3 with the 325i and 6.0 with the 330i?

Gut the exhaust on the 325i and you're probably 2/3 of the way there. Drop in an LSD to put that power to the road and you're all set. You'll run with the e36 M3's...almost.

Quote:

Originally Posted by miamibusta69

um.. are you kidding? 325 6.3 ? um your thinking of the 328. supercharged 325 can barely hang with an m3 .. people keep adding hp like it can be added
6 hp exhaust and 6 hp intake does not = 12 and hat ever a company states ake like 30 % of that and if your lucky you will get that number.

guys it wasnt Car&Driver it was Driv3r's Car!

http://www.e90post.com/forums/showth...ight=0-60+325i
BTW, That thread is soo old, back when the car just was released...honestly back then was when E90post was small and we all knew eachother...once the 335 came out, it all changed, for the worst IMO....

check the video i have evidence...
Just need a little of practice with the launching

I did not have the stock Runflats, had stickier BFgoodrich KDWs which may have contributed to the better time...

just4kickz · 04-02-2008, 10:11 PM

Quote:

Originally Posted by Driv3r

guys it wasnt Car&Driver it was Driv3r's Car!

http://www.e90post.com/forums/showth...ight=0-60+325i
BTW, That thread is soo old, back when the car just was released...honestly back then was when E90post was small and we all knew eachother...once the 335 came out, it all changed, for the worst IMO....

check the video i have evidence...
Just need a little of practice with the launching

I did not have the stock Runflats, had stickier BFgoodrich KDWs which may have contributed to the better time...

haha 335i -> e90post content downhill.

justin_bmw · 04-03-2008, 02:18 PM

Just get it done and get dynoed so you can post proof

cm3rc · 04-03-2008, 04:22 PM

Quote:

Originally Posted by just4kickz

haha 335i -> e90post content downhill.

lol i took a break from going on the forums and a year later its 335 for everything!

E90 post fo'life!

montreal_bimmer · 04-03-2008, 09:23 PM

since it's taking awhile... ill entertain with the video i was talking about...

http://www.e90post.com/forums/showth...=121218&page=2

enjoy

P.S: to the OP, dont leave us hanging like in the thread i linked up.... get back to us on this...

ianbiz · 05-10-2008, 02:38 AM

Update?

and1bball919 · 05-12-2008, 06:33 AM

man this thing seems to be a failure =( everyone claims to have it will work theoretically but its all in theory sigh!!! if it does work ... then post evidence !!! =D and all the 325i drivers will be =D otherwise its gonna be like a 30 page thread... which will cause many e90post members to have read through all the pages and find out that they just waited the past few hours on false hope

BMW_E90 · 05-13-2008, 01:46 PM

foreals....

ScheerSpeed · 05-13-2008, 09:18 PM

Ugh I Want More Power!!!!

noire07 · 05-19-2008, 12:17 PM

It seems like this might have failed. He's selling a 3-stage intake manifold...

http://www.e90post.com/forums/showthread.php?t=141601

Willstophe · 07-01-2008, 04:49 PM

Project almost completed. Ordered 330i ECU direct from Tischer parts and got my refund on the DTE software. Parts for the manifold will come in thursday. I have one of the actuators. I'm getting the other actuator (The one that's really tiny), the screws, and the wiring that wires to the ECU to control the actuators on the manifold. Autowerks in Huntington Beach, California will be performing the install once I have all the parts in. Sterling BMW off PCH in Newport Beach ordered all the parts that I needed for the manifold. They said the parts should be in by this Thursday. While Autowerk's is working on the install, I'll be getting the DTE refund and the brand new 330i ECU will arrive by the end of the week.

I decided not to give up because I want to be the first to ever do this conversion and prove it. In the end what I'll have is a 330i with 19' inch CSL rims, RD Sport exhaust with no secondary cats (recently removed by the way), Dinan High Flow Throttle Body, and Dinan Ram-Air Intake (Which I want to change out to Technik's intake if possible).

just4kickz · 07-01-2008, 04:57 PM

technik's intake is just a gruppe m. yes it fits on a 325.

Willstophe · 07-01-2008, 08:27 PM

I didn't ask if it fits....where do you see that?

just4kickz · 07-01-2008, 08:39 PM

Quote:

Originally Posted by Willstophe

I didn't ask if it fits....where do you see that?

"Which I want to change out to Technik's intake if possible"

i took it as you were thinking it wasn't possible? but with your reply i guess your talking about money or something other than whether its possible.

but thats where i see that, and btw... where the dyno at?

PAKMAN · 07-01-2008, 09:26 PM

i bet he spent a lottta moolah

jaceaholic · 07-01-2008, 10:20 PM

wow this thread started in MARCH and is now JULY and nothing has happened yet?? i had to read all of the pages to get to still waiting for the parts to come in.. hehehe.. but hopefully everything will work out.. GL~!

Papa13 · 07-02-2008, 04:20 AM

dyno sheets!!

04-02-2008, 07:37 PM	#68
Andrew@ET Brigadier General 181 Rep 4,038 Posts Drives: Red thing Join Date: May 2007 Location: Earth iTrader: (9)	hey this guy in this thread did this http://www.e90post.com/forums/showth...25#post2414525 he has an e90 328i !!! just read down... it is possible for 328's !
	Appreciate 0 Quote

04-03-2008, 02:18 PM	#71
justin_bmw Second Lieutenant 20 Rep 286 Posts Drives: E92 M3 Join Date: May 2005 Location: canada iTrader: (1)	Just get it done and get dynoed so you can post proof
	Appreciate 0 Quote

04-03-2008, 09:23 PM	#73
montreal_bimmer OEMconcept 174 Rep 5,593 Posts Drives: BMW Join Date: Feb 2006 Location: Canada \| USA iTrader: (6) Garage List 2006 325i [10.00]	since it's taking awhile... ill entertain with the video i was talking about... http://www.e90post.com/forums/showth...=121218&page=2 enjoy P.S: to the OP, dont leave us hanging like in the thread i linked up.... get back to us on this...
	Appreciate 0 Quote

05-10-2008, 02:38 AM	#74
ianbiz Back in a BMW 205 Rep 5,208 Posts Drives: 2015 335i Msport Join Date: Jul 2007 Location: Dallas, TX iTrader: (8)	Update? __________________ Ian
	Appreciate 0 Quote

05-12-2008, 06:33 AM	#75
and1bball919 It's not just about horsepower, but how powerful your horses are. 38 Rep 563 Posts Drives: MG Delivery truck Join Date: Dec 2005 Location: California iTrader: (4)	man this thing seems to be a failure =( everyone claims to have it will work theoretically but its all in theory sigh!!! if it does work ... then post evidence !!! =D and all the 325i drivers will be =D otherwise its gonna be like a 30 page thread... which will cause many e90post members to have read through all the pages and find out that they just waited the past few hours on false hope
	Appreciate 0 Quote

05-13-2008, 01:46 PM	#76
BMW_E90 Major 57 Rep 1,035 Posts Drives: 325i Join Date: Jul 2005 Location: California iTrader: (11)	foreals.... __________________
	Appreciate 0 Quote

05-13-2008, 09:18 PM	#77
ScheerSpeed Major General 415 Rep 5,767 Posts Drives: '13 F30 Estoril M-Sport 335i Join Date: Sep 2006 Location: Miami, FL iTrader: (14)	Ugh I Want More Power!!!!
	Appreciate 0 Quote

05-19-2008, 12:17 PM	#78
noire07 Private First Class 8 Rep 194 Posts Drives: 328xi Join Date: May 2008 Location: KS iTrader: (1)	It seems like this might have failed. He's selling a 3-stage intake manifold... http://www.e90post.com/forums/showthread.php?t=141601 __________________ 2007 328xi E90..Jet Black..Black Dakota Leather..Premium.Sport.CW..19" Staggered Gunmetal VMR v710..Blk Grills..Blacklines..LED Interior lights..OEM Spoiler..RR CDV..OEM Strut Bar..UUC SwayBarbarian Swaybars..H&R Coilovers..330i SSK..3 Stage Intake Manifold..BMW Performance Intake + Exhaust + Steering Wheel..PBX..V1 Hardwire..GPS Hardwire..Rear Power Outlets[Robot Happy Face]..Rear Fogs..OEM Alarm..Alpine PDX-5..Earthquake SWS 8" Subs..MB Quart RVF210[Fr+Rr]..iPod Adapter..35% Tint..
	Appreciate 0 Quote

07-01-2008, 04:49 PM	#79
Willstophe Willstophe 32 Rep 150 Posts Drives: 2006 BMW E90 325I Sedan Join Date: Feb 2008 Location: Irvine, CA iTrader: (0) Garage List 2006 E90 325i sedan [0.00]	Finishing what I started. Project almost completed. Ordered 330i ECU direct from Tischer parts and got my refund on the DTE software. Parts for the manifold will come in thursday. I have one of the actuators. I'm getting the other actuator (The one that's really tiny), the screws, and the wiring that wires to the ECU to control the actuators on the manifold. Autowerks in Huntington Beach, California will be performing the install once I have all the parts in. Sterling BMW off PCH in Newport Beach ordered all the parts that I needed for the manifold. They said the parts should be in by this Thursday. While Autowerk's is working on the install, I'll be getting the DTE refund and the brand new 330i ECU will arrive by the end of the week. I decided not to give up because I want to be the first to ever do this conversion and prove it. In the end what I'll have is a 330i with 19' inch CSL rims, RD Sport exhaust with no secondary cats (recently removed by the way), Dinan High Flow Throttle Body, and Dinan Ram-Air Intake (Which I want to change out to Technik's intake if possible). __________________ *Willstophe*
	Appreciate 0 Quote

07-01-2008, 04:57 PM	#80
just4kickz boku no namae ha... 336 Rep 11,025 Posts Drives: 2006 BS 330i Join Date: Feb 2006 Location: S. Bay Area, CA + Newark, NJ + ChiCity + True Blue iTrader: (11) Garage List 2006 E90 330i [0.00]	technik's intake is just a gruppe m. yes it fits on a 325. __________________ looking for a PreLCI Black Sapphire e90 front bumper without license plate holes "Akimbo shotguns. Broken wrists anyone? And don't give me that 'it's just a game' bull**. Where the are my akimbo interventions then?! One scope on each eye mother**er!!"
	Appreciate 0 Quote

07-01-2008, 08:27 PM	#81
Willstophe Willstophe 32 Rep 150 Posts Drives: 2006 BMW E90 325I Sedan Join Date: Feb 2008 Location: Irvine, CA iTrader: (0) Garage List 2006 E90 325i sedan [0.00]	I didn't ask if it fits....where do you see that? __________________ *Willstophe*
	Appreciate 0 Quote

07-01-2008, 09:26 PM	#83
PAKMAN Lieutenant General 360 Rep 16,214 Posts Drives: 2011 E92 M3 Join Date: May 2006 Location: NORTHERN CALIFORNIA iTrader: (35) Garage List 2011 BMW E92 M3 [9.50] 2006 e90 330i [5.50]	i bet he spent a lottta moolah __________________ stock car
	Appreciate 0 Quote

07-01-2008, 10:20 PM	#84
jaceaholic thestream.tv 120 Rep 3,134 Posts Drives: 2007 e92 sparkling graphite Join Date: Jan 2008 Location: northern california iTrader: (7)	wow this thread started in MARCH and is now JULY and nothing has happened yet?? i had to read all of the pages to get to still waiting for the parts to come in.. hehehe.. but hopefully everything will work out.. GL~! __________________
	Appreciate 0 Quote

07-02-2008, 04:20 AM	#85
Papa13 Go Gators! 90 Rep 1,621 Posts Drives: e82 / e90 / e53 / e46 Join Date: Nov 2005 Location: Tampa / SoCal iTrader: (5) Garage List 2009 135i [0.00]	dyno sheets!! __________________ e90 M-Tech 330i JB/Terra / e82 n54 135i AW/CR 420rwhp 444rwtq - RIP e53 X5 4.8is M///BLUE/M///SUEDE - 357whp 369wtq - The Snow Beast! n54 135i JB/CR JB4 FBO - Tc Kline D/A Coils - 11.5 @ 122mph 1/4 mile 18' Blue/Black SEL Premium R-Line 4 Motion Tiguan - Mods on order
	Appreciate 0 Quote