FS M3 OEM lower and upper control arms with Bimmerworld monoball bearings

NRBRNG · 04-25-2020, 03:31 PM

BIMMERPOST / Classifieds

Asking Price:

Sold

Item Interest

Clearing out the garage...

Price lowered. $375 shipped in CONUSA + any pp fees.

You can see my itrader status (and my M3 project) on the m3 forum...

Taken off my M3 when it had about 25K miles on it. The BW monoball bearings were only put on for a few years- saw about 25 trackdays only (before i moved to a full SPL set up). no road use or rain.
The 4 arms are a straight swap for to the E9X platform and give you an extra .8 or so of camber. This, combined with the precision and lack of flex of the monoball bushing would be a really great handling improvement- best $ mod for my M3 at the time by far. If i recall correctly, i didn't really notice any noticeably bad NVH increases either.
All ball joints and rubber are perfect.

(OEM tie rod ends in pic are not included- I believe they don't fit non M cars anyway. Regardless, they are $75 plus shipping)

call or text= faster response. 9719986253. Thanks, Mark

Here's the BW link for the bearings. And you don't need to have them pressed in!

https://www.bimmerworld.com/Suspensi...93-M3-E82.html

NRBRNG · 04-28-2020, 11:54 AM

Price lowered and includes CONUSA shipping.

335i_sleeper · 05-01-2020, 12:21 AM

Do you have the piece that gets screwed into the one control arm for the headlight level sensor?

NRBRNG · 05-02-2020, 12:45 PM

Quote:

Originally Posted by 335i_sleeper

Do you have the piece that gets screwed into the one control arm for the headlight level sensor?

I do not. They are available though about $25. Special price for you. $350 shipped

https://www.fcpeuro.com/BMW-parts/M3...20sensor%20rod

NRBRNG · 05-02-2020, 12:48 PM

Quote:

Originally Posted by 335i_sleeper

Do you have the piece that gets screwed into the one control arm for the headlight level sensor?

I do not. They are available though about $25. Special price for you- $350 shipped

https://www.fcpeuro.com/BMW-parts/M3...20sensor%20rod

Beygan · 05-28-2020, 03:52 AM

Interested

MikeP335i · 06-26-2020, 10:07 PM

Did you sell these?

NRBRNG · 06-28-2020, 11:22 AM

Quote:

Originally Posted by MikeP335i

Did you sell these?

sold. thx

04-25-2020, 03:31 PM	#1
NRBRNG Lieutenant 228 Rep 447 Posts Drives: '09 E92, SG & '89 635 CSi Join Date: Jan 2011 Location: OREGON, USA iTrader: (11)	FS M3 OEM lower and upper control arms with Bimmerworld monoball bearings BIMMERPOST / Classifieds Asking Price: Sold Item Interest Clearing out the garage... Price lowered. $375 shipped in CONUSA + any pp fees. You can see my itrader status (and my M3 project) on the m3 forum... Taken off my M3 when it had about 25K miles on it. The BW monoball bearings were only put on for a few years- saw about 25 trackdays only (before i moved to a full SPL set up). no road use or rain. The 4 arms are a straight swap for to the E9X platform and give you an extra .8 or so of camber. This, combined with the precision and lack of flex of the monoball bushing would be a really great handling improvement- best $ mod for my M3 at the time by far. If i recall correctly, i didn't really notice any noticeably bad NVH increases either. All ball joints and rubber are perfect. (OEM tie rod ends in pic are not included- I believe they don't fit non M cars anyway. Regardless, they are $75 plus shipping) call or text= faster response. 9719986253. Thanks, Mark Here's the BW link for the bearings. And you don't need to have them pressed in! https://www.bimmerworld.com/Suspensi...93-M3-E82.html Attached Images __________________ DCT. Custom Cantrell MS cage. Fire, SCCA, dedicated track. Diffs-online 3.62, diff cooler, MCS 2-ways, SPL arms, TMS solid SF/Diff bushings, RD sway, DO88 Coolers (DCT, RAD, PS, OIL) Akra catless GT4, BPM tune, Hans Recaro, AP Pro 5000R, Cobalt XR2/4 race pads, BBS E88's, Yoko A005 slicks, RKP GT4 Splitter, GT4 canards, APR GT250 Wing, CFK Hood, Flossman CFK fenders, BW carbon doors, Dinan R toe links, Mini battery. Last edited by NRBRNG; 04-28-2020 at 11:53 AM.. Reason: lowered price price
	Appreciate 0 Tweet Quote

04-28-2020, 11:54 AM	#2
NRBRNG Lieutenant 228 Rep 447 Posts Drives: '09 E92, SG & '89 635 CSi Join Date: Jan 2011 Location: OREGON, USA iTrader: (11)	BUMP Price lowered and includes CONUSA shipping. __________________ DCT. Custom Cantrell MS cage. Fire, SCCA, dedicated track. Diffs-online 3.62, diff cooler, MCS 2-ways, SPL arms, TMS solid SF/Diff bushings, RD sway, DO88 Coolers (DCT, RAD, PS, OIL) Akra catless GT4, BPM tune, Hans Recaro, AP Pro 5000R, Cobalt XR2/4 race pads, BBS E88's, Yoko A005 slicks, RKP GT4 Splitter, GT4 canards, APR GT250 Wing, CFK Hood, Flossman CFK fenders, BW carbon doors, Dinan R toe links, Mini battery.
	Appreciate 0 Quote

05-01-2020, 12:21 AM	#3
335i_sleeper Private 6 Rep 59 Posts Drives: e92 coupe Join Date: Feb 2013 Location: Lansdale, PA iTrader: (1) Garage List 2007 e92 335i [0.00]	Do you have the piece that gets screwed into the one control arm for the headlight level sensor?
	Appreciate 0 Quote

05-28-2020, 03:52 AM	#6
Beygan First Lieutenant 29 Rep 383 Posts Drives: 435i M-Sporter Join Date: Jan 2019 Location: SoCal iTrader: (1)	Interested
	Appreciate 0 Quote

06-26-2020, 10:07 PM	#7
MikeP335i Private 15 Rep 67 Posts Drives: 2009 335xi Join Date: Sep 2018 Location: Annandale, VA iTrader: (0)	Did you sell these?
	Appreciate 0 Quote