[DenWorks]

Hello everyone,
I perfectly retrofitted and codded to VO $606 my cic mid system to my 2010 E90 one month ago. I detected an issue about lagging when i scrolling in idrive menu while car start moving on the road.
I have no an issue when car stops i mean it doesnt have laggy scrolling but it starting to work as laggy when car moves.

CID can H can L retrofitted from JBE x14272 connector
idrive controller can H can L retrofitted from Quadlock connector
they both gets power from quadlock connector.
Added a youtube video about that issue.

https://www.youtube.com/watch?v=N_XdMzyDk9c





regards,

[smass]

There is some CAN bus wire that runs down the center console next to the parking brake. Wire your i-drive controller in there and the issue may go away. You want the controller wiring to be as short as possible.

[DenWorks]

Originally Posted by smass

There is some CAN bus wire that runs down the center console next to the parking brake. Wire your i-drive controller in there and the issue may go away. You want the controller wiring to be as short as possible.

thank you, i gonna do that as soon as possible till today ends

[DenWorks]

Originally Posted by smass

There is some CAN bus wire that runs down the center console next to the parking brake. Wire your i-drive controller in there and the issue may go away. You want the controller wiring to be as short as possible.

It doesnt affected. The issue still remains any other ideas ?