help limped=(

ge0rgechen · 11-15-2010, 01:12 AM

So so far my car limped once at around 2k miles, and replaced. It was recently reprogrammed by crevier bmw about a three months ago. It started normally during a cold start so
Installed jb3 right after bring reprogrammed ran map 5 with injen intake and hks exahust on days under 80 deg. and stock on days above 80 deg. started running map 4 about 1.5 months ago even on some days over 80 deg. Ever since installing jb3 after reprogramming the car it still started with at least 2 or 3 cranks before starting up. Not just from cold start, but all starts.
Car limped today while cold starting- wierd crank noises car shook then went back to normal, but check engine light went on.

Do i need a bt scan tool before i take my car into dealer?
Should I just take out jb3 and take in my car to dealer?

enrita · 11-15-2010, 01:34 AM

your HPFP is failing. take it back to the dealer. Remove jb3 and if you can scan for codes. If no tuner codes are stored you are fine and there is no need to erase them but if there is one tuner code you need to erase all of them and make the car limp without jb3.

ge0rgechen · 11-15-2010, 02:13 AM

thanks!

11-15-2010, 01:12 AM	#1
ge0rgechen First Lieutenant 64 Rep 369 Posts Drives: 2009 msport E92 bsm 6mt Join Date: Jul 2009 Location: socal iTrader: (9)	help limped=( So so far my car limped once at around 2k miles, and replaced. It was recently reprogrammed by crevier bmw about a three months ago. It started normally during a cold start so Installed jb3 right after bring reprogrammed ran map 5 with injen intake and hks exahust on days under 80 deg. and stock on days above 80 deg. started running map 4 about 1.5 months ago even on some days over 80 deg. Ever since installing jb3 after reprogramming the car it still started with at least 2 or 3 cranks before starting up. Not just from cold start, but all starts. Car limped today while cold starting- wierd crank noises car shook then went back to normal, but check engine light went on. Do i need a bt scan tool before i take my car into dealer? Should I just take out jb3 and take in my car to dealer? __________________ '09 e92 Black Sapphire/Coral Red/Aluminum Trim, Aerodynamic Package, M Sport Package, Navi, Premium Package, 6 speed manual transmission. Injen DCI, APR custom splitter,ACS rep. roof spoiler,red cyba air scoops, HKS exhaust, VOLK ce28 TA, eurolight headlight tint.
	Appreciate 0 Tweet Quote

11-15-2010, 01:34 AM	#2
enrita Major General 159 Rep 7,378 Posts Drives: 335i - Big turbos Join Date: Sep 2008 Location: Italian in Sweden iTrader: (0)	your HPFP is failing. take it back to the dealer. Remove jb3 and if you can scan for codes. If no tuner codes are stored you are fine and there is no need to erase them but if there is one tuner code you need to erase all of them and make the car limp without jb3. __________________ 07 335i AT - MOTIV 750 - MHD E85 BMS flash - BMS PI - JB4G5 - Okada Coils - NGK 5992 Plugs - Helix IC - Snow Stg. 3 - Stett CP - Custom midpipes with 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - LUX H8 - Level 10 AT upgrade
	Appreciate 0 Quote

11-15-2010, 02:13 AM	#3
ge0rgechen First Lieutenant 64 Rep 369 Posts Drives: 2009 msport E92 bsm 6mt Join Date: Jul 2009 Location: socal iTrader: (9)	thanks! __________________ '09 e92 Black Sapphire/Coral Red/Aluminum Trim, Aerodynamic Package, M Sport Package, Navi, Premium Package, 6 speed manual transmission. Injen DCI, APR custom splitter,ACS rep. roof spoiler,red cyba air scoops, HKS exhaust, VOLK ce28 TA, eurolight headlight tint.
	Appreciate 0 Quote