|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Oil cooler o-rings
|
|
01-03-2019, 02:55 PM | #1 |
Enlisted Member
0
Rep 32
Posts |
Oil cooler o-rings
Guys looking to confirm something. 2008 e91 320d N47. Changing the oil filter housing gasket at its leaking. While the housing is off the block I've noticed the two connectors which are connected to the oil cooler within the housing are weeping. The bottom one in the pic pulled right off to allow me to change the o-rings on them. However the top one circled seems to me much harder to get out. Can someone confirm this will just pull out with force? Thanks Paul |
Bookmarks |
|
|