[Zekerbox]

My car is a 2011 E91 335iS. It's an 11' iS swapped into a wagon. Anyway. I spun a rod bearing a few weeks ago. I have a rebuilt engine being shipped to me with King bearings in it. My goal is 450-500 WHP. I'm going to list what I have for parts to build the new engine.



Tune related parts:



FCPeuro refurb index 12 injectors

Frankenturbo F21Bi Hybrids

VRSF Inlets and outlets

VRSF 7.5 stepped race intercooler

VRSF charge pipe

Turbosmart compact plum back DV's

ECS tuning Kohlefaser Luft-Technik intake (thought it looked cool)

VTT Dual Catch Cans with External PCV (port block off)

Ai Catted Ceramic coated downpipes

BMW performance Catback

JB4 with MHD BEF license and blutooth connect

I am not really interested in ditching the JB4 since I just bought it and I like a lot of the functionality of the JB4. Unless there is a compelling reason not to run the jb4.


There's other replacement and non-tuning related performance parts being installed and replaced. I won't list that stuff.



Anyway. My question is. Can someone provide me with a baseline tune or recommendation on how I should go about getting the JB4 set-up for breaking in the engine safely so I can put a few thousand miles on before logging and really tuning?



Thanks for your help and recommendations!

[mym3isslow]

Originally Posted by Zekerbox

My car is a 2011 E91 335iS. It's an 11' iS swapped into a wagon. Anyway. I spun a rod bearing a few weeks ago. I have a rebuilt engine being shipped to me with King bearings in it. My goal is 450-500 WHP. I'm going to list what I have for parts to build the new engine.



Tune related parts:



FCPeuro refurb index 12 injectors

Frankenturbo F21Bi Hybrids

VRSF Inlets and outlets

VRSF 7.5 stepped race intercooler

VRSF charge pipe

Turbosmart compact plum back DV's

ECS tuning Kohlefaser Luft-Technik intake (thought it looked cool)

VTT Dual Catch Cans with External PCV (port block off)

Ai Catted Ceramic coated downpipes

BMW performance Catback

JB4 with MHD BEF license and blutooth connect

I am not really interested in ditching the JB4 since I just bought it and I like a lot of the functionality of the JB4. Unless there is a compelling reason not to run the jb4.


There's other replacement and non-tuning related performance parts being installed and replaced. I won't list that stuff.



Anyway. My question is. Can someone provide me with a baseline tune or recommendation on how I should go about getting the JB4 set-up for breaking in the engine safely so I can put a few thousand miles on before logging and really tuning?



Thanks for your help and recommendations!

You might get more help posting on n54 tech in the n55 sub forum.

[Emilime75]

Actually, try the N54 sub-forum since you don't have an N55.

[Zekerbox]

Originally Posted by Emilime75

Actually, try the N54 sub-forum since you don't have an N55.

Woops! didn't realize I posted this in the N55 forum....

Thanks!