INTRO: Camber-Toe aka Boopie Motorworks

itsbrokeagain · 02-16-2010, 09:38 AM

I figure since I'm the OG who started the whole install craze some 2 years ago, why not make a thread for my own shop

Quite a few of you do remember the days when I used to roadtrip all over the place doin installs at ppls houses in 100 degree weather (Sal? Lol) down to the freezing mark. After being introduced to a good group of people over at Camber-Toe I decided to partner up with them and give the E90post and Mpost community a real deal shop to have their cars worked on. No more freezing hands or feet off, no rolling around in the rain, no ramps.

With just about 4000 sq ft to work in, we have a full showroom, 2 lifts and a separate 4 post lift featuring the top of the line Hunter Alignment machine, the same one BMW uses at the dealerships. We also have a tire mounter and balancer on the premises, and we are a certified New York Inspection Station.

We also have a bodyshop next door, but if you really want to have your parts painted in the most professional way, MAC is the way to go!

We do everything from the simplest things as putting wheels on your car all the way to replacing turbos

. We also will go as far as to replacing engine/trans (stay tuned for our E30 M3 project!)
Also on the hot ticket list is X6 suspensions

Torch on hand for those pesky bolts that refuse to budge

We will also be getting factory software and scantools for both BMW and Benz shortly, and we also do PPI (pre purchase inspections) for Porsches, but this can also apply to any make/model of euro car.

In addition to modifying your Porsche/Benz/BMW, we also do regular maintnenance for any of you who are outside warranty, or simply have an older vehicle you wish to keep in shape.

Here are a few pics for the time being. My camera battery went dead and I've been super busy with other work in the shop. Hopefully this weekend when Aaron brings his brand new 2010 E92 into the shop for some work I will have plenty of pictures to ad

When the weather gets warmer keep your eyes open for a BBQ thread or two!

Camber-Toe
659 Merrick Rd
Lynbrook NY 11563
516 872 6400

*Boopie Motorworks name created and distributed by Dan, any attempt to distribute outside of Boopie Motorworks without expressed written consent of Dan himself will result in an immediate ass-whooping*

Bobby_LeMans · 02-16-2010, 09:41 AM

nice stuff Camel Toe...
Boopie MoterWerkz!

ultimateendz · 02-16-2010, 09:42 AM

u need to add "Boopie Motorworks name created and distributed by Dan, any attempt to distribute outside of boopie motorworks without expressed written consent of Dan himself will result in an immediate ass-whooping

"

335xiRN · 02-16-2010, 09:46 AM

I just spit my water out Dan! Hahahahaha! Where have you been?!?!

ultimateendz · 02-16-2010, 09:51 AM

Quote:

Originally Posted by 335xiRN

I just spit my water out Dan! Hahahahaha! Where have you been?!?!

been out hustlin....we in a recession dammit...lol. gotta stack so i can get around...

ultimateendz · 02-16-2010, 09:53 AM

no but seriously Matt...u need to add that disclaimer to your post...cant have people claiming they thought that name up when they didnt...therefore resulting in a foot up their ass....

BIMMER//DRIMMER · 02-16-2010, 10:47 AM

sup matt!
congrats on ur shop!

Dmitriy@AUTOcouture · 02-16-2010, 11:13 AM

Good luck Matt! Wish you all the best!

MyE92 · 02-16-2010, 11:25 AM

Very professional "Boopie Motorworks"

02-16-2010, 11:28 AM

Quote:

Originally Posted by Matt@Camber-Toe

if you really want to have your parts painted in the most professional way, MAC is the way to go!

Thanks!!

Congrats to you Matt!!

JBiddy · 02-16-2010, 12:12 PM

Matt!!! Congratz bro! Matt is the man he has intalled pretty much everything that i have on my car! Great guys over at Camber Toe and great prices!

Wish you the best OG!

Ender514 · 02-16-2010, 12:34 PM

good stuff!

cn555ic · 02-16-2010, 01:45 PM

I visited the shop, the shop is no joke...The alignment machine is massive...It has every single goody tool there is!! Congrats on the new shop business for the community...Matt's prices are insane and very very competitive.

bknight · 02-16-2010, 01:56 PM

I would totally recommend Camber Toe... and of course Matt who basically needs no introduction as one of the best techs in our area. It's a really cool shop and they were able to do my alignment on aftermarket 19s with active steering on my old 335i when BMW dealers could not. Great shop and Matt will take care of you!

RevC · 02-16-2010, 02:52 PM

Congrats man, I wanna get my car checked out, its vibrating like crazy above 55, idk whether its my wheels unblanced or susp damage, can you guys check it out for me for reasonable fee?

itsbrokeagain · 02-16-2010, 03:31 PM

Quote:

Originally Posted by RevC

Congrats man, I wanna get my car checked out, its vibrating like crazy above 55, idk whether its my wheels unblanced or susp damage, can you guys check it out for me for reasonable fee?

We can do that, PM me and we can work out details.

Sal@AUTOcouture · 02-16-2010, 04:29 PM

'grats bro

Bimmer335i07 · 02-16-2010, 04:32 PM

Finally put up your own thread, huh? lol!

Matt has worked on both my e90 335i and e36 325is. Last Winter he was working out in my driveway in freezing cold weather, just to get my e36 beater running. He took apart the whole engine and replaced anything that needed to be replaced. This guy really knows his way around Bimmers. I HIGHLY recommend Matt! Not only is he a certified BMW tech, he's also now a certified Mercedes tech and has also worked on Porsches as well as imports.

Good luck with everything Matt! Soon parts will be rolling in for the e90 and I'm going to need your's and Sal's help to get the car to where I want it to be.

gtrokin330 · 02-16-2010, 06:36 PM

Camber-Toe FTW! You guys did my alignment back when i had the gold DPE's.

Sal G@Camber-Toe · 02-16-2010, 06:38 PM

Matt check your pm's.......

3pete3the5greekI · 02-16-2010, 07:31 PM

Matt can you pm pricing on a alignment please

JBiddy · 02-16-2010, 08:06 PM

DUDE their alignment machine is TITS!!!! my alignment after my suspension is awesome! and its still good!

02-16-2010, 09:38 AM	#1
itsbrokeagain 310 Rep 15,745 Posts Drives: 1999 528iT, E53 X5, E46 325xi Join Date: Mar 2007 Location: Strong Island iTrader: (7)	INTRO: Camber-Toe aka Boopie Motorworks I figure since I'm the OG who started the whole install craze some 2 years ago, why not make a thread for my own shop Quite a few of you do remember the days when I used to roadtrip all over the place doin installs at ppls houses in 100 degree weather (Sal? Lol) down to the freezing mark. After being introduced to a good group of people over at Camber-Toe I decided to partner up with them and give the E90post and Mpost community a real deal shop to have their cars worked on. No more freezing hands or feet off, no rolling around in the rain, no ramps. With just about 4000 sq ft to work in, we have a full showroom, 2 lifts and a separate 4 post lift featuring the top of the line Hunter Alignment machine, the same one BMW uses at the dealerships. We also have a tire mounter and balancer on the premises, and we are a certified New York Inspection Station. We also have a bodyshop next door, but if you really want to have your parts painted in the most professional way, MAC is the way to go! We do everything from the simplest things as putting wheels on your car all the way to replacing turbos . We also will go as far as to replacing engine/trans (stay tuned for our E30 M3 project!) Also on the hot ticket list is X6 suspensions Torch on hand for those pesky bolts that refuse to budge We will also be getting factory software and scantools for both BMW and Benz shortly, and we also do PPI (pre purchase inspections) for Porsches, but this can also apply to any make/model of euro car. In addition to modifying your Porsche/Benz/BMW, we also do regular maintnenance for any of you who are outside warranty, or simply have an older vehicle you wish to keep in shape. Here are a few pics for the time being. My camera battery went dead and I've been super busy with other work in the shop. Hopefully this weekend when Aaron brings his brand new 2010 E92 into the shop for some work I will have plenty of pictures to ad When the weather gets warmer keep your eyes open for a BBQ thread or two! Camber-Toe 659 Merrick Rd Lynbrook NY 11563 516 872 6400 Boopie Motorworks name created and distributed by Dan, any attempt to distribute outside of Boopie Motorworks without expressed written consent of Dan himself will result in an immediate ass-whooping Attached Images Last edited by itsbrokeagain; 02-17-2010 at 11:52 PM..
	Appreciate 0 Tweet Quote

02-16-2010, 09:41 AM	#2
Bobby_LeMans Banned 155 Rep 11,639 Posts Drives: your mom wild! Join Date: Apr 2009 Location: 5towns iTrader: (3)	nice stuff Camel Toe... Boopie MoterWerkz!
	Appreciate 0 Quote

02-16-2010, 09:42 AM	#3
ultimateendz Vengeance is mine, I shall repay 132 Rep 4,656 Posts Drives: X3, CTS-V coupe Join Date: Feb 2009 Location: NJ iTrader: (1)	u need to add "Boopie Motorworks name created and distributed by Dan, any attempt to distribute outside of boopie motorworks without expressed written consent of Dan himself will result in an immediate ass-whooping" __________________ Project: Vengeance[ACM's King of domestics, STOCK:501whp 489wtq \| 2.9L whipple stock bottom end: 706whp 688wtq] Callies Compstar motor build:NEXT
	Appreciate 0 Quote

02-16-2010, 09:46 AM	#4
335xiRN That's RACIST! 82 Rep 3,943 Posts Drives: 2009 BMW 335xi Join Date: Nov 2008 Location: the BIG apple iTrader: (1) Garage List 2009 335i xDrive Coupe [0.00]	I just spit my water out Dan! Hahahahaha! Where have you been?!?! __________________ ZSP\|ZCP\|ZPP\|LUXH8\|performance grilles\|HID fogs\|aero lip\|black lower mesh\|injen DCI\|JB4\|CF interior\|rixter boost gauge\|VRS spoiler\|rear fogs\|19" LC 818\|toyo proxes\|H&R coilovers\|AE quad exhaust
	Appreciate 0 Quote

02-16-2010, 09:53 AM	#6
ultimateendz Vengeance is mine, I shall repay 132 Rep 4,656 Posts Drives: X3, CTS-V coupe Join Date: Feb 2009 Location: NJ iTrader: (1)	no but seriously Matt...u need to add that disclaimer to your post...cant have people claiming they thought that name up when they didnt...therefore resulting in a foot up their ass.... __________________ Project: Vengeance[ACM's King of domestics, STOCK:501whp 489wtq \| 2.9L whipple stock bottom end: 706whp 688wtq] Callies Compstar motor build:NEXT
	Appreciate 0 Quote

02-16-2010, 10:47 AM	#7
BIMMER//DRIMMER Lieutenant 22 Rep 516 Posts Drives: e90 330i 06 Join Date: Aug 2007 Location: Douglaston NY iTrader: (3) Garage List 06 330i [0.00]	sup matt! congrats on ur shop!
	Appreciate 0 Quote

02-16-2010, 11:13 AM	#8
Dmitriy@AUTOcouture Major 209 Rep 1,133 Posts Drives: carefully Join Date: Dec 2006 Location: NYC iTrader: (3)	Good luck Matt! Wish you all the best!
	Appreciate 0 Quote

02-16-2010, 11:25 AM	#9
MyE92 El Presidente 278 Rep 6,962 Posts Drives: your mom wild. Join Date: May 2007 Location: NJ iTrader: (24)	Very professional "Boopie Motorworks"
	Appreciate 0 Quote

02-16-2010, 12:12 PM	#11
JBiddy Brigadier General 198 Rep 3,840 Posts Drives: F82 ///M Join Date: Apr 2008 Location: Northern/N.J iTrader: (9)	Matt!!! Congratz bro! Matt is the man he has intalled pretty much everything that i have on my car! Great guys over at Camber Toe and great prices! Wish you the best OG! __________________ ///M
	Appreciate 0 Quote

02-16-2010, 12:34 PM	#12
Ender514 General 228 Rep 20,998 Posts Drives: 2009 E92 335i Join Date: Feb 2008 Location: Philly iTrader: (0)	good stuff! __________________ 09' E92 335i \| 6MT \| Montego Blue \| Black Dakota Leather \| Dark Burl Walnut \| Premium \| Sport \| Cold Weather \| Nav \| Sirius \| Comfort Access \| iPod and USB adapter
	Appreciate 0 Quote

02-16-2010, 01:45 PM	#13
cn555ic 441 Rep 18,331 Posts Drives: 335i Join Date: Jun 2007 Location: US iTrader: (6)	I visited the shop, the shop is no joke...The alignment machine is massive...It has every single goody tool there is!! Congrats on the new shop business for the community...Matt's prices are insane and very very competitive. Last edited by cn555ic; 02-16-2010 at 02:21 PM..
	Appreciate 0 Quote

02-16-2010, 01:56 PM	#14
bknight Captain 60 Rep 609 Posts Drives: F95 X5M Competition Join Date: Jan 2008 Location: United States iTrader: (0)	I would totally recommend Camber Toe... and of course Matt who basically needs no introduction as one of the best techs in our area. It's a really cool shop and they were able to do my alignment on aftermarket 19s with active steering on my old 335i when BMW dealers could not. Great shop and Matt will take care of you!
	Appreciate 0 Quote

02-16-2010, 02:52 PM	#15
RevC Lieutenant General 178 Rep 11,768 Posts Drives: a couple fast toys Join Date: Jun 2009 Location: Voorhees+cherry hill,NJ iTrader: (26)	Congrats man, I wanna get my car checked out, its vibrating like crazy above 55, idk whether its my wheels unblanced or susp damage, can you guys check it out for me for reasonable fee? __________________ -Rev SGM e92 335xi\|Helix\|AFE\|AWE\|PROCEDE\|SYNAPSE\|ER\|OSS\|BMW PERFORMANCE\|P3\|always growing..
	Appreciate 0 Quote

02-16-2010, 04:29 PM	#17
Sal@AUTOcouture 733 Rep 10,105 Posts Drives: E93 M3, E36 M3 Join Date: Feb 2007 Location: Sofla iTrader: (30)	'grats bro
	Appreciate 0 Quote

02-16-2010, 04:32 PM	#18
Bimmer335i07 BK Employee of the month! / Moderator 636 Rep 15,795 Posts Drives: BMW 335i Sedan Join Date: Apr 2007 Location: ... iTrader: (9) Garage List 2007 335i [0.00]	Finally put up your own thread, huh? lol! Matt has worked on both my e90 335i and e36 325is. Last Winter he was working out in my driveway in freezing cold weather, just to get my e36 beater running. He took apart the whole engine and replaced anything that needed to be replaced. This guy really knows his way around Bimmers. I HIGHLY recommend Matt! Not only is he a certified BMW tech, he's also now a certified Mercedes tech and has also worked on Porsches as well as imports. Good luck with everything Matt! Soon parts will be rolling in for the e90 and I'm going to need your's and Sal's help to get the car to where I want it to be. __________________ Sponsored by: Pics of the ---> Barbera Beast <--- Martino Auto Concepts (Like them on Facebook MAC) Factory Trained & Authorized by BMW of North America Matt@Camber-Toe (Like them on Facebook Camber-Toe) LuxAngelEyes (Like them on Facebook LuxAngelEyes) LTBMW (Like them on Facebook LTBMW) OEMconcepts (Like them on Facebook OEMconcepts)
	Appreciate 0 Quote

02-16-2010, 06:36 PM	#19
gtrokin330 Brigadier General 150 Rep 3,865 Posts Drives: TT Join Date: Sep 2007 Location: LI iTrader: (7)	Camber-Toe FTW! You guys did my alignment back when i had the gold DPE's.
	Appreciate 0 Quote

02-16-2010, 06:38 PM	#20
Sal G@Camber-Toe 203 Rep 14,190 Posts Drives: E92 335xi 6mt Join Date: Jun 2009 Location: Long Island, NY iTrader: (2)	Matt check your pm's.......
	Appreciate 0 Quote

02-16-2010, 07:31 PM	#21
3pete3the5greekI The GrEeK 80 Rep 3,548 Posts Drives: F30 335xi M EBII Join Date: Jul 2007 Location: Westbury, NY, Strong Island!! iTrader: (4)	Matt can you pm pricing on a alignment please __________________ 3P3T5Gi 2007 e90 335i (batmobile) ~ bye bye 2011 e90 335i M-Sport (Stella) ~ BYe Bye 2013 F30 335xi M-Sport EBII
	Appreciate 0 Quote

02-16-2010, 08:06 PM	#22
JBiddy Brigadier General 198 Rep 3,840 Posts Drives: F82 ///M Join Date: Apr 2008 Location: Northern/N.J iTrader: (9)	DUDE their alignment machine is TITS!!!! my alignment after my suspension is awesome! and its still good! __________________ ///M
	Appreciate 0 Quote