[GTRZilla]

Originally Posted by Mk2dude

how are the mid pipes connected to headers? 335i exhaust flanges are larger than 328. Also what did you use for exhaust hangers by the exhaust tips? I just finished installing same setup minus exhaust, but can't figure out exhaust flange connection to headers

Look closer at the pic, the 335i mid pipes are welded on to 328i ones

Blindside_137 Thanks. Btw, are you running a custom exhaust atm or a muffler delete?

[Eat.Sleep.Race]

nice!

[Mk2dude]

Originally Posted by GTRZilla

Yeah, that's what I'm thinking of doing if the longtran@ltbmw won't respond to my message. I like how they hid the evap in this 328i, you can't even see where it is on the pics. So I wanna know if they switched it to a 335i evap canister or hid it somewhere. But if no one tells I guess I'll either ask a shop where I will install the 335i exhaust or just do like what you did. I only got the 335i storage bin because I actually wanna run a dual exhaust like 335i has, not welded piping under the trunk from 1 exhaust

I called them and asked them. They put evap in factory location like 335i driver side. To do this you will need 335i splash guards left and right, 335i evap bracket, storage bin, exhaust sheild, rear 335i rear enforcement bar "hangers are attach to bar". All exhaust hangers, 335i exhaust muffler, and you have cut and weld your mid pipe flange to 335i exhaust mid pipe to fit n52 headers. You also need mtech rear bumper along with diffuser. It's not a cheap swap.

[Mk2dude]

Originally Posted by GTRZilla

Look closer at the pic, the 335i mid pipes are welded on to 328i ones

Blindside_137 Thanks. Btw, are you running a custom exhaust atm or a muffler delete?

was running stock 335i exhaust system from mid pipes to muffler. now I'm running supersprint headers, mid pipes, x pipes and modded 335i muffler to PE.

[GTRZilla]

Originally Posted by Mk2dude

was running stock 335i exhaust system from mid pipes to muffler. now I'm running supersprint headers, mid pipes, x pipes and modded 335i muffler to PE.

That's a good mod.
I'm still gaining the rest of the parts for a 335i exhaust mod haha, hopefully by the end of next month everything will be done

[6MTF80]

Originally Posted by Mk2dude

I called them and asked them. They put evap in factory location like 335i driver side. To do this you will need 335i splash guards left and right, 335i evap bracket, storage bin, exhaust sheild, rear 335i rear enforcement bar "hangers are attach to bar". All exhaust hangers, 335i exhaust muffler, and you have cut and weld your mid pipe flange to 335i exhaust mid pipe to fit n52 headers. You also need mtech rear bumper along with diffuser. It's not a cheap swap.

You could try calling Ivan @ Strassesport. Good guy in Irwindale with great service who I'm sure can give you a good price.

[GTRZilla]

My only concern is, this exhaust doesnt have any O2 sensor ports, so the primary cat here is in the muffler and nothing is connected. Wanna know if there is gonna be a CEL, prob needs a tune to remove it

[Mattb0601]

I'm trying to do this mod on my 328i because someone gave me 335i Dinan mufflers. The only problem I'm having is nobody posts anything about moving the charcoal canister, what did you do?

[NYBulldog]

Originally Posted by Mattb0601

I'm trying to do this mod on my 328i because someone gave me 335i Dinan mufflers. The only problem I'm having is nobody posts anything about moving the charcoal canister, what did you do?

You need to change your floor trunk bucket FIRST and then relocate your charcoal canister. All the 335i models use the short bucket for exhaust clearance, same no matter the submodel. I simply moved my canister 90 degrees and a few inches to the right side. Shop made some simple L brackets and they were done. However the end of my pipes do not have mufflers. You need to put your car on the lift and see how much clearance your have with the Dinan mufflers on. If you have less clearance you will need to move it close to the center and in front of the bucket. If you need to move it a considerable amount you will need fittings and extensions.

Start with an exhaust test fit. IF your rear bumper does not have dual exits you need to remove your rear bumper.




another one:



another one:





another one:

[Mattb0601]

Thanks for the response, I've done tons of research on this and I'm aware of everything including the trunk bin which I have already. I had plans to move ithe canister to the left side just how the 335s are, the main issue is that the lines to the canister are hard plastic... How did you move or extend the lines. The only other issue that I found the solution to is matching up the bigger 335 exhaust to the smaller 328 head pipes, welding.

[truth]

If possible, please PM me approximate cost to have this installed. Thanks!

[GTRZilla]

Mine. Completed today, couldnt be happier. More videos later

[Sherbakoff]

Давай?

[GTRZilla]

Originally Posted by Sherbakoff

Давай?

😆 Да да))

[Sherbakoff]

У вас тонировка разрешена, я не пойму? Или все ездят как в России, нарушают?

[GTRZilla]

Originally Posted by Sherbakoff

У вас тонировка разрешена, я не пойму? Или все ездят как в России, нарушают?

Можно 35% на передних с водительской и пассажирской стороны, задние по 15%. На лобовом у меня полоска сверху 15% тоже

[whiplashsucks]

I have an '06 325i with the 3.0. I am not rich or have much funds by any means, ........does anyone know any exhaust mods I can make to sound awesome> It has seemed Flowmaster/Magnaflow sound pretty bad on Most BMW's, the Electric Exhaust Cutout sounds great on some, horrid on others. The BMW performance exhaust sounds great but way pricey. Suggestions?.....

[New2010]

How does it sound?

[Tim603]

Originally Posted by whiplashsucks

I have an '06 325i with the 3.0. I am not rich or have much funds by any means, ........does anyone know any exhaust mods I can make to sound awesome> It has seemed Flowmaster/Magnaflow sound pretty bad on Most BMW's, the Electric Exhaust Cutout sounds great on some, horrid on others. The BMW performance exhaust sounds great but way pricey. Suggestions?.....

I just did a simple muffler delete on my 328 and I loved it. Listen to some exhaust vids on youtube

[deepy_is_creepy]

Very nice