|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
E9X M3 Rogue Engineering Monoball installed in OEM Thrust Arms
|
|
09-20-2019, 01:05 PM | #1 |
Major General
964
Rep 5,032
Posts |
E9X M3 Rogue Engineering Monoball installed in OEM Thrust Arms
This and KW Clubsports were my two favorite mods I did to my E92 M3. I was keeping these Monoballs to install on my F82, but Ben at Rogue just told me that these would need modification to work, so I am going to bite the bullet and buy a new set from Rogue. By getting these from me you can do this job at home in 1-2 hours depending on your level of proficiency. The thrust arms on E92 M3 are very easy to access and remove/install. No need for a press considering they are already pressed into the arm that I am providing. I put these on shortly after purchasing my car, and I only drove my car about 12k miles, so that means they have <12k miles. Rogue price $389 and I believe thrust arms from FCP Euro are about $150 each, so in my estimation this is a helluva deal. Last edited by Spun Crankhub; 09-21-2019 at 02:56 AM.. |
Bookmarks |
|
|