|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Advice needed on valve cover gasket
|
|
02-25-2020, 11:48 AM | #1 |
First Lieutenant
244
Rep 344
Posts |
Advice needed on valve cover gasket
Over the past month I've done a lot of work on my car (serpentine belt assembly, ofhg and coolant flush,brake flush, air box etc.) and the last thing the car needs is a new valve cover gasket, my question is how long can I put off doing this before it could become a problem, also what are the major issues that could stem from not changing it besides having to add oil(not major lol). Doesn't seem like there's any parts that it could leak onto, where as the ofhg was leaking right on the serpentine belt before I replaced it,I would like to do it eventually myself possibly but no garage and winter don't make for a good job.
|
02-25-2020, 12:21 PM | #2 |
Major General
1903
Rep 6,968
Posts
Drives: 2007 Black/Black 335i e90
Join Date: Apr 2011
Location: Holly, MI
|
If the leak makes its way to the front of the engine, oil will seep onto the belt. This will cause the belt to fray and wrap around the crank. Once the belt wraps around the crank, it gets sucked into the engine via the crank seal. If that happens, there's a good chance your engine is toast.
|
02-25-2020, 05:46 PM | #3 |
Major General
2188
Rep 5,001
Posts |
If it’s not smoking at stoplights and causing a ruckus elsewhere (front of engine) then you’re fine to wait. But if it’s the spark plug, ESS or valvtronic seal then you could have more issues come your way.
Mine ‘wept’ or ‘sweated’ just enough to see for 30k miles before I replaced it. |
Appreciate
1
F22leo244.00 |
02-25-2020, 09:47 PM | #4 |
Major General
231
Rep 5,691
Posts |
Oil is flammable, your leak from the valve cover will start to drip onto the converters. Converters run really hot. There is a potential of fire, ive never seen one catch fire yet but it could happen. Do it at your earliest convenience
|
Appreciate
1
F22leo244.00 |
02-26-2020, 09:33 AM | #5 |
Major
1013
Rep 1,268
Posts |
If it start leaking on to exhaust or the belt then you have a problem.
My VCG had minor leak and then one day I had smoke coming from under the hood, it was dripping onto the turbo's. I parked the car and order the parts. The leak went from minor to significant in little over the year. When I pulled the VCG it was completely cracked all over the place. I did the work at 160K miles to give you an idea how long it was on before it got bad. |
Appreciate
1
F22leo244.00 |
02-26-2020, 10:59 AM | #6 | |
First Lieutenant
244
Rep 344
Posts |
Quote:
|
|
Appreciate
0
|
02-27-2020, 12:37 PM | #8 |
Major
1013
Rep 1,268
Posts |
It is not too hard to change, if you are going to do the VCG, you should think about doing plugs and coils since the coils need to be removed at same time. I also did my OFH gasket as well, and number of other items under the hood since you have to disassemble most of the top of the engine to replace the gasket. If your doing the gasket it can be done in under 3 hours.
Also my VCG did not show signs of leaking until about around 140K, obviously my lasted longer than most people experience. My oil pan gasket has been leaking and it needs done, I just have not have the time since it requires lifting the engine or dropping the sub-frame. |
Appreciate
0
|
02-27-2020, 04:28 PM | #9 | ||
Major General
1903
Rep 6,968
Posts
Drives: 2007 Black/Black 335i e90
Join Date: Apr 2011
Location: Holly, MI
|
Quote:
|
||
Appreciate
0
|
02-27-2020, 04:50 PM | #10 | |
First Lieutenant
244
Rep 344
Posts |
Quote:
|
|
Appreciate
0
|
Bookmarks |
|
|