[santiagosgarage]

Originally Posted by Skiy

That's interesting. I have not seen that. It should share oil pan with 135i. Are you 100% sure?

Yeah we share the same oil pan. Not possible for any e-series cars with a power steering pump on the pan. Unless we somehow cad mounting points and make it clear our subframes too

[Skiy]

Originally Posted by santiagosgarage

Yeah we share the same oil pan. Not possible for any e-series cars with a power steering pump on the pan. Unless we somehow cad mounting points and make it clear our subframes too

I just took apart the 135i engine and a newer n55 in the last month. It was not bolted to oilpan anywhere

[santiagosgarage]

Idk what to tell you man. Didn't mean to hijack your sale post with my comment. Glws

[Skiy]

Originally Posted by santiagosgarage

Idk what to tell you man. Didn't mean to hijack your sale post with my comment. Glws

Its all good. Is this the mounting point?

[santiagosgarage]

Originally Posted by Skiy

Its all good. Is this the mounting point?

Yup thats it

[Detazzz1]

Originally Posted by Skiy

I have all the parts to swap in the F8X M cars dual pump oiling system.
The F8X oil pan, oil pump, secondary oil pump, pick up baffle, oil chain guides with tensioners, chain, sprocket. Everything is from a 2019 M4 except oil pan which is from an older model year car. but its the aluminum revised one. not the early oil pan.

Ignore the rod in the picture. thats not included.

Will be putting my project on hold for a while so if theres any interest I will sell this.

$1600 plus shipping or you can pick up.

Originally Posted by Skiy

I have all the parts to swap in the F8X M cars dual pump oiling system.
The F8X oil pan, oil pump, secondary oil pump, pick up baffle, oil chain guides with tensioners, chain, sprocket. Everything is from a 2019 M4 except oil pan which is from an older model year car. but its the aluminum revised one. not the early oil pan.

Ignore the rod in the picture. thats not included.

Will be putting my project on hold for a while so if theres any interest I will sell this.

$1600 plus shipping or you can pick up.

You got it from eBay ?

[Skiy]

Originally Posted by Detazzz1

You got it from eBay ?

No. I have a source in latvia who parts out cars and this was going to go into my 135i but Im not rebuilding it anymore.

[Nazaryakymivskyy]

We have a bracket we engineered that will bolt up the hydraulic power steering pump if you upgrade to s55 oil pan

[Szczypiorek]

Originally Posted by Skiy

https://www.fcpeuro.com/products/bmw...-11137854463kt

It fits the 135i and 335i which had hydraulic power steering. For cars manufactured after 02/2012

So if I understand this correctly this kit should fit my E92 335i N55 manufactured on 09/2012 right?

From the discussion I understood that the problem is the mounting of the hydraulic power steering pump and after 02/2012 it should not be connected to the oil pan?

[houtan]

Originally Posted by Nazaryakymivskyy

We have a bracket we engineered that will bolt up the hydraulic power steering pump if you upgrade to s55 oil pan

Can you share more information on this please?

[Szczypiorek]

Originally Posted by santiagosgarage

Yeah we share the same oil pan. Not possible for any e-series cars with a power steering pump on the pan. Unless we somehow cad mounting points and make it clear our subframes too

Ok so looks like the mounting point is an issue that can be resolved.
But what about the clear space between s55 oil pan and the subframe in my E92 335i RWD? Is it a problem or is there enough room?
I'd be super helpful for any answer