|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Cheap and easy 1b file from CIC
|
|
04-10-2017, 02:26 PM | #199 |
First Lieutenant
217
Rep 245
Posts |
lolkid, your car should have ethernet, you just need to get on the same subnet with it somehow. One way that should work (though I haven't tried) is to connect the car and computer to a router. The router needn't be connected to anything else and it should automatically assign similar addresses to both the car and computer (after rebooting CIC). Most routers will tell you what addresses are connected from the admin console but otherwise you can hunt around by pinging addresses similar to your PC's.
|
Appreciate
0
|
04-10-2017, 03:02 PM | #200 |
New Member
2
Rep 5
Posts |
I got it working!
I did the following: 1. Set my laptop's wired connection IP to 192.168.0.1; subnet mask as 255.255.255.0 and default gateway 192.168.0.1. Left DNS blank. 2. Opened Tftpd64 application and did the following: * Went to DCHP tab * Set IP pool start address to: 192.168.0.2 * Set size of pool to: 10 * Set default router to: 192.168.0.1 * Set mask to: 255.255.255.0 * Pressed "OK" button * Selected 192.168.0.1 (ethernet connection) from the "Server interfaces" dropdown 3. I then connected the ethernet to ODB2 cable to the car and started the car engine. 4. I pressed and held down the radio power/volume button for 30 seconds 5. The iDrive screen restarted 6. I then noticed that the tftp32 application indicated that it had assigned 192.168.0.2 and 192.168.0.3 7. I visited ftp://192.168.0.2/ in my web browser and was promoted for a username and password 8. I entered "root" and "Hm83stN)" and logged in successfully. 9. I then downloaded the file in question. I'm now about to try getting the part I need using a hex editor. Will let you know how I get on. |
Appreciate
1
Roch M4424.00 |
04-13-2017, 03:08 PM | #201 |
New Member
2
Rep 5
Posts |
I have now successfully updated my maps to 2017-1 EUROPE WEST PREMIUM. Thanks for all the help!
I completed the following steps: 1. Opened "generalPersistencyData_DiagnosticSWTControlle r" file in HxD Hex Editor 2. In HxD Hex Editor, did a search for "01 01 00 1B" (datatype: hex) 3. This should find the value starting at the 27E offset. 4. Highlighted and deleted everything before the 01 01 00 1B point. 5. Scroll down to line 130 and delete the last block (last 2 characters) of that line and everything after it. 6. Save the file as something new e.g. "fsc.fsc" 7. Right clicked on the new file and selected properties and checked that it was exactly 319 bytes. 8. Opened Command Prompt and ran: "fsc.exe fsc.fsc 0x28 0x29" 9. This gave me a generated FSC code which I noted down and ran in the car - which worked! Note: When I first tried it, I thought that I had to base64 covert the file after step #6, but this is not the case. The file can be used directly in "fsc.exe". |
Appreciate
0
|
04-14-2017, 05:09 PM | #202 |
Second Lieutenant
60
Rep 299
Posts |
Instead of messing around with IP addresses, I simply plugged my ENET cable into my router, then typed the IP address (which I could see in my router's admin panel) into my browser and navigated to the file. Didn't even ask me for a password and the FSC worked. Great post!
|
Appreciate
0
|
04-18-2017, 11:02 AM | #203 | |
New Member
2
Rep 5
Posts |
Quote:
For many who park their car on the street far from a power socket, using software to make your (battery powered) laptop function as a router is the best viable option. |
|
Appreciate
0
|
04-18-2017, 02:34 PM | #204 |
New Member
7
Rep 9
Posts |
E9X CIC FTP connection refused
I have a 03/2009 E91 with CIC. I want to get the 1b file.
My CIC is under 10.250.89.2, successful ping, my laptop is 10.250.89.1. Browser (both IE and firefox) claim page could not be opened. Via Telnet (port 23) I was able to login with root/cic0803, but telnet is not able to copy files from the car to the local computer. Setting up a DHCP server also works fine, the CIC fetches an IP address, the rest is the same: connection refused. I discovered with a port scan that in any of the cases the CIC is not listening at port 21. "Connection refused" is a standard answer if a device is not listening at a particular port. Also I have tried different IP addresses, these were: 160.48.199.98 (PC) & 192.48.199.99 (CIC) and 169.254.199.98 (PC) & 169.254.199.99 (CIC), which both don't work. 10.250.89.1 (PC) 10.250.89.2 (CIC) works, but CIC does not listen at port 21. Does anyone know how to start the ftp service via telnet? I am able to call the program "ftpd" on my car, can somebody provide a command calling ftpd that makes me able to logon via ftp? Thanks a lot for any help! Last edited by thomasx; 04-21-2017 at 07:57 AM.. Reason: update |
Appreciate
0
|
04-19-2017, 01:57 AM | #205 | |
Registered
0
Rep 4
Posts |
Quote:
The only difference is I've tried it on Windows 10 64bit and on Windows 7 32bit. On both operating systems I'm not getting a code.txt file. I only see the window flashing quickly (which looks like a trojan ) |
|
Appreciate
0
|
04-19-2017, 08:32 PM | #207 |
First Lieutenant
217
Rep 245
Posts |
Are you typing ftp:// in front of the address? Are you entering 89.2 as the default gateway and disabling any other network connections? Maybe you should try a dedicated FTP program.
|
Appreciate
0
|
04-21-2017, 07:58 AM | #208 |
New Member
7
Rep 9
Posts |
Yes, I've tried all that. I was working with FileZilla, think this is a dedicated ftp program. Thanks for your help!
|
Appreciate
0
|
04-22-2017, 03:13 PM | #209 |
First Lieutenant
217
Rep 245
Posts |
I don't know Thomas, maybe the address you're connecting to is a different port that doesn't support file transfers. Try one of the methods above to force the CIC to the address of your choosing and see if that lets you connect.
|
Appreciate
0
|
05-11-2017, 09:38 PM | #210 |
Save the manuals!
6012
Rep 6,742
Posts |
I've been using this method to make FSC codes for years but now it's driving me nuts.
I downloaded the files in the FSC Generator link on the first page and use FSC.exe from the CIC folder, but whatever code I generate from the hex file is deemed invalid for the CIC. I've attached the a.hex file (and it shows the correct last 7 digits of the VIN of this 2012 X1), can someone take a look and let me know what is going on? In a second instance, it doesn't prompt me for a log-in when I connect on my GF's 2010 335i. I download the SWT file, trim it, save it, but the VIN shows up as 1234567 instead of the actual VIN. Thoughts?
__________________
'16 M3 | '23 718 Spyder Past: E92 M3, F87 M2, E39 M5, etc |
Appreciate
0
|
05-12-2017, 07:05 PM | #211 |
First Lieutenant
217
Rep 245
Posts |
For the first issue where the VIN is correct and CIC is not script-hacked but an invalid code is generated, see options 9a and/or 11a in the OP.
For the second issue try a different browser. Sometimes the file gets completely converted into something else that says "BMW" and looks pretty good but somehow lists the VIN as "1234567" and contains no useful information. |
Appreciate
0
|
05-14-2017, 03:52 AM | #212 | |
Private First Class
20
Rep 105
Posts |
Quote:
SO retry finding the right place with 01 01 00 1b if I remember correctly this is the first one IF this is the usual 1b length (319 bytes) you must see just before that all these data: 1B 00 01 3F 01 00 00 01 01 1B This means 013F length in Hex or 139 in decimal, the length is repeated an the end of the data. Some have 42 01 and means that the length is 322 bytes. I think you have the 319 one as you reached to have your Fsc before, so verify the right cut. If you don't want a new asked Fsc for the next map just put FF in the index. Sample of a Fsc.bat script where 2D is for North America and FF LifeTime index and where all yours Files are in C:\EC-APPS\ (location without any space ) Code:
ECHO OFF CLS IF NOT EXIST fsc.exe ECHO File fsc.exe NOT FOUND ! IF NOT EXIST a.hex ECHO a.hex does NOT EXIST ! C:\EC-APPS\Fsc.exe a.hex 0x2D 0xFF > Code.txt IF %ERRORLEVEL% EQU 0 ECHO File code.txt was created successfully! PAUSE Last edited by Pierre26; 05-20-2017 at 06:04 AM.. |
|
Appreciate
0
|
05-24-2017, 12:05 PM | #214 | |
Save the manuals!
6012
Rep 6,742
Posts |
Quote:
__________________
'16 M3 | '23 718 Spyder Past: E92 M3, F87 M2, E39 M5, etc |
|
Appreciate
0
|
05-29-2017, 11:32 AM | #215 |
Private First Class
20
Rep 105
Posts |
Sorry very busy, well I tried your file but this isn't the original uncutted one ! (mine is 14.222 bytes = 13,8Ko) I did once again the procedure cutting from the first ''01 01 00 1B'' met (mine is repeated 5 times) and then cutting the end.
When I use your file searching I only have one time the data ''01 01 00 1B'' Then Fsc creating give me the known error Fsc after create xD01. So retry using a dedicated Ftp client (eg: File Zilla) download it in mnt/HBperistence original name is: ''generalPersistencyData_DiagnosticSWTController'' Do nothing with it except file .txt extension to Upload (or make a backup before working on it). PS: your file is 319 Bytes, you have the usual 3F 01 data before. You can delete the last one posted, will give you my mail in PM. |
Appreciate
0
|
05-29-2017, 12:40 PM | #217 |
Save the manuals!
6012
Rep 6,742
Posts |
Yup I realized the new file I obtained from the car and attached actually worked. The old one must've had some error :/
__________________
'16 M3 | '23 718 Spyder Past: E92 M3, F87 M2, E39 M5, etc |
Appreciate
0
|
05-29-2017, 02:07 PM | #218 |
TL/DR
57
Rep 234
Posts
Drives: 2009 335d Sport
Join Date: Oct 2012
Location: Arizona
|
Could somebody take a look at my 1B. I trimmed down the original to 319 bytes, and have fed it into fsc.exe multiple times. But the copy file FSC keeps giving me invalid codes using 0x2D 0x29 or 0xFF.
I tried a few different years just to make sure the lifetime FF wasn't messing it up. Any help would be appreciated! |
Appreciate
0
|
05-29-2017, 04:07 PM | #219 |
///M
227
Rep 2,248
Posts |
Can anyone PM me where I can download maps nowadays? Used to torrent maps from the vendor that sells FSC codes but it seems like they are not a vendor here anymore. My apologies if I am throwing the thread off topic, thanks!
__________________
|
Appreciate
0
|
05-29-2017, 10:42 PM | #220 |
Private First Class
20
Rep 105
Posts |
|
Appreciate
0
|
Bookmarks |
|
|