[Pete’s335is]

Hey guys,

I have a 2011 335is and it’s been a serious PITA to get my inlets installed. First shop quoted me a reasonable price yet upon my arrival I had to explain where the stock inlets were located after they told me my inlets were missing air flow sensors. Other local shops are quoting upwards of 500+ with appointments a month out so I gave up and was able to install the front inlet myself. I wanted to see if anyone could put me on with a reasonable shop in the Maryland/DC area to do my rear inlet for a reasonable price. TIA

[SBe92]

S2 Dynamics in Rockville

[jgj925]

Would NOT recommend S2 dynamics. Had a fuel injector installed incorrectly and failed prematurely.

GT Peace is the absolute best shop in the area for any N54 work. I drive about 40 miles one way to get here just because I know my car is in good hands. Great prices as well.

[sk1939]

Originally Posted by Pete’s335is

Hey guys,

I have a 2011 335is and it’s been a serious PITA to get my inlets installed. First shop quoted me a reasonable price yet upon my arrival I had to explain where the stock inlets were located after they told me my inlets were missing air flow sensors. Other local shops are quoting upwards of 500+ with appointments a month out so I gave up and was able to install the front inlet myself. I wanted to see if anyone could put me on with a reasonable shop in the Maryland/DC area to do my rear inlet for a reasonable price. TIA

Sigy's Service Center in Rockville
Premier Autowerks in Frederick
Excluservice in Rockville

[Sgop335]

Originally Posted by sk1939

Sigy's Service Center in Rockville
Premier Autowerks in Frederick
Excluservice in Rockville

Premier autowerks did the turbos and oil pan gasket on my 535i, professionals...

[FCobra94]

Originally Posted by Sgop335

Premier autowerks did the turbos and oil pan gasket on my 535i, professionals...

What does a job like that run for around here, if you don't mind me asking?

[Sgop335]

Originally Posted by FCobra94

What does a job like that run for around here, if you don't mind me asking?

Turbos labor ( no parts) was $1480 and the reduced labor for the Oil pan gasket due to overlap was $450