|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
M47 320d Flywheel and Upgraded Clutch
|
|
07-31-2018, 08:22 AM | #1 |
Lieutenant Colonel
175
Rep 1,596
Posts |
M47 320d Flywheel and Upgraded Clutch
Got for sale a low-mileage flywheel and upgraded clutch kit for an M47 engined 320d (it might fit other models too).
Flywheel and clutch was bought new in 2015 and has covered around 15k miles. They are LUK brand. The clutch comprises of a standard LUK friction disk, and a 330d pressure plate. The 330d plate has a higher clamping pressure, which lets the clutch handle more torque. Ideal for tuned cars or hybrid turbo etc. Direct fit to any 320d (and 318d) with the earlier M47 engine. Looking for £200 plus postage. https://www.dropbox.com/s/gylpnjueev...22.48.jpg?dl=0 As an additional point to note, the 330d pressure plates increased clamping force gives a slightly heavier pedal feel. This is common with upgraded clutches on all cars. However to compensate for this, BMW fitted a larger bias spring in the pedal box on the larger engined cars. These are very cheap from the dealer (£15-20), and i would recommend getting one and swapping it in as it makes the clutch nicer to use. |
Bookmarks |
|
|