Sponsored by The Tire Rack

[13Sun13]

Hello, just wanted to see picture of your guys cars on Apex ARC 8s. If you could also leave the size of them and offset.

I’m interested in a squared setup of 17 x 9 or was lookin at a staggered setup of 17 x 9 up front and 17 x 10 in the back.

[Expert@ApexWheels]

Originally Posted by 13Sun13

Hello, just wanted to see picture of your guys cars on Apex ARC 8s. If you could also leave the size of them and offset.

I’m interested in a squared setup of 17 x 9 or was lookin at a staggered setup of 17 x 9 up front and 17 x 10 in the back.

Hi there,

We actually have a full non-M E9x gallery thread chocked-full of pictures you can check out. There are plenty of 17" setups shown as well!

The thread can be found here: https://www.e90post.com/forums/showthread.php?t=748105

Please let me know if you have any specific fitment questions!

-Geirsen

[13Sun13]

Originally Posted by Expert@ApexRaceParts

Hi there,

We actually have a full non-M E9x gallery thread chocked-full of pictures you can check out. There are plenty of 17" setups shown as well!

The thread can be found here: https://www.e90post.com/forums/showthread.php?t=748105

Please let me know if you have any specific fitment questions!

-Geirsen

Hello, I have a couple questions actually, I’m essentially looking for the widest setup I can get without having to make any modifications(rolling fenders is okay). I was looking at a squared setup of 17 x 9 but what would you guys suggest? I’m trying to fill out the wheel wells and have a nice aggressive and meaty setup. Car is a E92 non M.

[Expert@ApexWheels]

Originally Posted by 13Sun13

Hello, I have a couple questions actually, I’m essentially looking for the widest setup I can get without having to make any modifications(rolling fenders is okay). I was looking at a squared setup of 17 x 9 but what would you guys suggest? I’m trying to fill out the wheel wells and have a nice aggressive and meaty setup. Car is a E92 non M.

Hi there,

The 17x9" ET30 square setup is going to be the widest you can go before needing to make modifications to the vehicle. Here is some additional info regarding that specific fitment:

Front & Rear: 17x9" ET30 with 245/40-17 tires
-Direct fit.
-Available in ARC-8, ARC-8R, and EC-7R designs.
-255/40-17 can be used but may require front negative camber.
-5mm front spacers may be required with certain aftermarket suspensions,
see below.

With 245/40-17 tires at all four corners, this setup will provide a meaty tire fitment both front and rear. With stock suspension, it will be a complete direct fit. However, if you have or plan to install coilovers known to reduce inner suspension clearance (KW, ST, etc) a 5mm front spacer will be required to clear those components.

Please let me know if you have any other questions!

-Geirsen

[MR92_]

[IMG]undefined[/IMG]

17x9 squared with 255 40 nankang ar1 tires

[matteblue3er]

17x9 et30 255/40/17 Square. I do have spacer but I don't remember size. I want to say 10mm front 12-15mm rear.

[em5ive]

^drool. I always go back and forth whether I'll eventually be getting 17x9 or 18x9!

[blau808]

Took these about 3 years ago. Couldn't be happier with the setup 3 years later. Need some new tires though!

255/35/18x9" ET30

[flgfish]

2012 E91. 17x9 ET30 square setup on MP4s 245/40's.